Register now to get rid of these ads!

Art & Inspiration <<<< Friday Art Show 12/15/17

Discussion in 'The Hokey Ass Message Board' started by 57 Corvette ~ Bob, Dec 14, 2017.

  1. 57 Corvette ~ Bob
    Joined: May 20, 2009
    Posts: 1,937

    57 Corvette ~ Bob
    Member

  2. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 12,287

    Bandit Billy
    ALLIANCE MEMBER

    Hey, I'm the first to respond on the Friday art show! woo hoo! I'm finally somebody, things are going to start happening to me now.
     
    Just Gary, MMM1693, Chavezk21 and 5 others like this.
  3. eye mechanic
    Joined: Apr 12, 2012
    Posts: 22

    eye mechanic
    Member

  4. BOMONSTER
    Joined: Jul 14, 2008
    Posts: 516

    BOMONSTER
    Member

    bomonster-christmas-santas-toys.jpg
    "Santa's Toys" Ready...Get set....
     
    pwschuh, 0351, Animal and 38 others like this.

  5. GaryC.
    Joined: Mar 24, 2007
    Posts: 1,557

    GaryC.

    High-Boy Roadster at Night Spencer High-Boy at Night.png
     
    verde742, BOMONSTER, pwschuh and 49 others like this.
  6. Davkin
    Joined: Apr 5, 2008
    Posts: 439

    Davkin
    Member
    from SLC, Utah

    Finished the painting.

    ACR020-20X16-1217-L.jpg
     
    0351, David Gersic, Animal and 31 others like this.
  7. philo426
    Joined: Sep 20, 2007
    Posts: 2,097

    philo426
    Member

  8. Turnpike Cruiser...



    [​IMG]
     
  9. Stogy
    Joined: Feb 10, 2007
    Posts: 26,345

    Stogy
    ALLIANCE MEMBER

    I use Photoshop quite often around here and while not pencil to paper it gives me and many others pause to ponder what if and perhaps have a smile or a good chuckle. Is it art...I think so...so there probably will be a Christmas Art Show but many of you may be away only of course by crowbar...:p...so heres an early wish to you all...Should you not celebrate Christmas I also extend Peace, Joy and Happiness to you and your families as well.

    MCH2017.JPG

    Regards,
    Stogy

     
    Last edited: Dec 15, 2017
    Baron, rust&patina, verde742 and 33 others like this.
  10. Frogz
    Joined: Jan 15, 2013
    Posts: 499

    Frogz
    Member

    Awesome start guys!!!!!!

    [​IMG]
     
    Baron, Texas57, verde742 and 48 others like this.
  11. georgeg
    Joined: Nov 18, 2008
    Posts: 186

    georgeg
    Member
    from Il

    Always look forward for FAS day! DSC_2986.jpg DSC_2819.jpg
     
    Baron, Jokem59, fourspd2quad and 26 others like this.
  12. ’51 Ford taildragger, custom

    51_Ford_Custom_4web.jpg


    “ ’55 Ponch Gasser No. 3”

    55_Ponch_Gasser_N03_4web.jpg
     
    Baron, Jokem59, David Gersic and 36 others like this.
  13. Here's a rendering I did that is a concept of what a Cadillac sport platform might have look like back in the day and done in an attempt to capture younger upscale buyers and to compete with the Corvette. I call it the "Vista Dome" and it's a bit radical but cool at the same time. In later years they did try to broaden their market with the introduction of the Allant'e but it was a lackluster design with lackluster results.


    HAMB.jpg
     
  14. philo426
    Joined: Sep 20, 2007
    Posts: 2,097

    philo426
    Member

    Pretty intriguing concept do you have a front view ?Interested to see how you would envision the grille and hood.
     
  15. kenmo
    Joined: Apr 23, 2011
    Posts: 1,050

    kenmo
    Member

    Wow Bob...Jaw dropping gorgeous.... Looks like a fine art air brushed work... Superb!!!!
     
    57 Corvette ~ Bob and georgeg like this.
  16. edcodesign
    Joined: Mar 30, 2007
    Posts: 4,716

    edcodesign
    ALLIANCE MEMBER

    image.jpeg Great start as always, thanks for the likes ! Did you say High-Boy ?
     
    Baron, Jokem59, fourspd2quad and 28 others like this.
  17. edcodesign
    Joined: Mar 30, 2007
    Posts: 4,716

    edcodesign
    ALLIANCE MEMBER

  18. jnaki
    Joined: Jan 1, 2015
    Posts: 9,293

    jnaki

    upload_2017-12-15_5-12-57.png upload_2017-12-15_5-13-40.png
    POP UP CHRISTMAS CARD
    Hello,

    Our resident Photoshop expert “The Moose” gave me a great idea for anyone to make and send a custom Christmas card to friends. It is a simple pop up card with only two slices or cuts in them. If you want to hide the cuts, simply add in another similar card stock on the outside and glue it to the one with the cut.

    WHAT YOU WILL NEED:
    1. Printer paper, photograph of a car, family, or both
    2. A thicker, smooth card stock paper that will be sturdy
    3. An envelope that fits or the custom pattern below.
    4. Xacto knife, cutting board, etc.

    Steps: practice
    1. Select the photograph, size it to your liking, making sure that it is in focus.
    2. Select the practice printer paper and do the whole project first

    3. Fold the paper in half
    4. Open it up and measure out where you want the pop up step to stick out.
    5. Draw the thin pencil lines on the sides where you will be making cuts.
    6. Once the cuts are made, go to the top and bottom to make a gentle

    crease/fold. It helps the pop out step do its thing correctly.
    7. Practice opening and closing the folded card to check out the pop out step.
    8. Make you corrections on the practice paper.
    9. Once the cuts allow the pop out section to fold correctly, then you are ready.


    Steps for the final:


    1. Make your outside card from the card stock paper
    2. Make your cuts
    3. Help the folds fold/lean correctly
    4. Measure the area where the photograph will be glued down
    5. Adjust the photograph size to fit
    6. Print out your photograph on card stock
    7. Glue to the front of the fold out surface that will lay down.
    8. You may use color card stock, plain white or add your own color
    9. Above and below the pop out photo, there is plenty of space for greetings, family notes, etc.


    Jnaki

    If your mailing list is 25+, it will take a while, but it is still “doable.” Customize each one for each family member or friend.
    upload_2017-12-15_5-18-28.png upload_2017-12-15_5-18-37.png upload_2017-12-15_5-18-50.png upload_2017-12-15_5-19-14.png upload_2017-12-15_5-19-33.png upload_2017-12-15_5-20-16.png upload_2017-12-15_5-20-29.png upload_2017-12-15_5-20-50.png upload_2017-12-15_5-21-5.png upload_2017-12-15_5-21-20.png

    Thanks for the hot rod Christmas photo, MOOSE...!
     
    Last edited: Dec 15, 2017
    Baron, hrm2k, Sancho and 12 others like this.
  19. Bob, I Gotter ask, since no one has, what's the story here?

    IMG_20171216_023255.jpg
     
    Animal, chriseakin, Sancho and 9 others like this.
  20. Ron Brown
    Joined: Jul 6, 2015
    Posts: 1,711

    Ron Brown
    ALLIANCE MEMBER

    Yeah....yer gonna hafta start takin naps for getting up so early.
     
    Stogy likes this.
  21. Ron Brown
    Joined: Jul 6, 2015
    Posts: 1,711

    Ron Brown
    ALLIANCE MEMBER

    Andrew...this is killer work in the medium Im trying to learn...way frickin cool.
     
    Ron Funkhouser likes this.
  22. Cree
    Joined: Jun 13, 2017
    Posts: 137

    Cree
    Member
    from Montana

    Baron, Jokem59, David Gersic and 27 others like this.
  23. mark schanfeldt
    Joined: Jun 28, 2007
    Posts: 286

    mark schanfeldt
    Member

  24. MMM1693
    Joined: Feb 8, 2009
    Posts: 1,152

    MMM1693
    ALLIANCE MEMBER

    Yeah, like getting a major award in the mail from France!
     
  25. ...some really nice stuff today, Eye Mechanic, really like the Buick, and Frogz,...always cool stuff from you...I've been wanting to do a vintage shop scene, but couldn't help throwing in a hot rod shop truck...
    woodart phillips 66 shop 001.jpg woodart phillips 66 shop 003.jpg woodart phillips 66 shop 002.jpg
     
    Baron, Jokem59, David Gersic and 28 others like this.
  26. Fredlaurent47
    Joined: Nov 9, 2017
    Posts: 7

    Fredlaurent47
    Member

    [​IMG]
    ' Crossroads '

    Sketches are the warm ups... Now I 'justaveto' design it big size and paint it !
     
    Baron, Jokem59, David Gersic and 29 others like this.
  27. plywude
    Joined: Nov 3, 2008
    Posts: 699

    plywude
    Member Emeritus
    from manteca ca

    Bomonster Glad to see your work back on here.................
    Frogz...As always you hit it out of the park..........................
     
  28. georgeg
    Joined: Nov 18, 2008
    Posts: 186

    georgeg
    Member
    from Il

    I'm always blown away by the quality of the work on this thread. Congrats to all!
     
  29. THANKS for a great F.A.S. everyone. Here's a few 20171125_173341.jpg Christmas photos from my phone gallery. 20171205_174218.jpg 20171214_135320.jpg 20171125_173106.jpg

    Sent from my SM-G920P using The H.A.M.B. mobile app
     
    Baron, Animal, hrm2k and 18 others like this.
  30. Bringing’ ‘em back for an encore.
    “Jupitor Pod” ( ‘o’ intentional) Asymmetrical GM/Chevrolet ‘what of’ dream car concept, c1962. done for an old H.A.M.B. drawing challenge...

    J_P_004.jpg

    JupitorPodprofile01.jpg~original.jpg

    Jupitordetail.jpg

    Jupitor-2A.jpg
     
    Baron, Jokem59, BOMONSTER and 30 others like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.