Technical Early Oldsmobile Engine/Model A Pics?

does anyone have pictures to post of early olds 303/324 in a stock model a frame?
32 frame? engine mounts? recessed firewalls? steering boxes? exhaust setups? thanks in advance...

 

324 in a slightly modified A frame
Hurst mounts, starter switchover F1 box

 

What's the wheelbase @Paul?

 

371 going in fabbed A frame
Hurst Mount, Vega box, recess for magneto

 

303 in A frame,
Hurst mounts, F1 box above frame rail, starter in stock location

 

I'd have to put a tape on it to be sure but I think it worked out to be same as stock A
that frame got a T body on it too so the firewall sits further back than an A

 

324 in a pinched 32 frame original starter 40 ford style steering box.

 

324 in a model a roadster, cowl steering, 3 pedals


Sent from my iPhone using The H.A.M.B. mobile app

 

Looking good, what are you using for a transmission. I just picked up a 303 olds with a manual flywheel. Looking into putting it in my 33" Plymouth


Sent from my iPhone using H.A.M.B.

 

I believe it's an older borg warner 5 spd, 1st is where 2nd would be?? it's one of my buddy's cars, I'll have to check with him I just do his heavy brackets and chassis fab work


Sent from my iPhone using H.A.M.B.

 

Can't see much by way of engine mounts, but this was my coupster with a 324


Sent from my iPhone using The H.A.M.B. mobile app