Register now to get rid of these ads!

Projects My 52-54 victoria build

Discussion in 'Traditional Customs' started by voodookustoms, Apr 3, 2015.

  1. I was able to work it back into place, grind the metal clean, bevel some edges and surprisingly get some pretty clean welds in there. It was a pain in the ass but now it's better than it was from the factory.
     
  2. 56longroof
    Joined: Aug 1, 2011
    Posts: 2,348

    56longroof
    Member

    I've noticed the factory welds are less than stellar on many occasions. Glad to hear your back on the road.

    Sent from my SM-G900R4 using The H.A.M.B. mobile app
     
  3. IMG_1482110815.091941.jpg
    IMG_1482110844.375217.jpg
    I finally got around to installing my rebuilt hood hinges this weekend. Since my firewall was so best up from this poor cars previous life, I could not get the box to fit completely. I straightened all the flanges the best I could and finagled it into place as close to original as I could but had to use two sheet metal screws to hold the outside of the box to the firewall.
    IMG_1482110991.918230.jpg
    The passenger side went on a lot smoother. Next up I have to make a custom mounting bracket for the Blower motor due to my raised fenderwells.


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Squablow and The 39 guy like this.
  4. Dude that's looking great! Can't wait to see it with the hood on!
     
    voodookustoms likes this.
  5. flamingokid
    Joined: Jan 5, 2005
    Posts: 2,200

    flamingokid
    Member

  6. Nice job on your car, looks great. Gotta a couple questions regarding your hood hinges. Did you "rebuild" them and if so what did that entail. Was that done to correct the rear of the hood staying up, not sitting flush with fender when closing hood ?
     
    voodookustoms likes this.
  7. Not sure how you define large dose of Loctite. be careful too much and I does not cure.
     
  8. Hey Rick. I had a local machinist rebuild them. He specializes in hinges. He took them all apart, strengthened the pivot holes by adding thicker steel on the vent side, he fabricated the front arms out of thicker steel, reamed all the holes and made all new rivets/pivots for a tight fit. And he installed all new springs. If your interested, send me a dm and I'll get you his number. They are now much better than any remanufactured hinges you can buy.
    And yes, it will fix the corners sticking up like you mentioned.


    Sent from my iPhone using The H.A.M.B. mobile app
     
  9. Thanks. Good to know.


    Sent from my iPhone using The H.A.M.B. mobile app
     
  10. 56longroof
    Joined: Aug 1, 2011
    Posts: 2,348

    56longroof
    Member

    voodookustoms likes this.
  11. IMG_1482283305.112670.jpg
    IMG_1482283314.589833.jpg
    I got the bracket installed now. I'm pretty happy with it considering I made it with a 4" grinder, a die grinder and a drill press. Not happy with some of the welds, but it will do I suppose.


    Sent from my iPhone using The H.A.M.B. mobile app
     
  12. flamingokid
    Joined: Jan 5, 2005
    Posts: 2,200

    flamingokid
    Member

    Don't beat yourself up,that looks great ;)
     
    voodookustoms likes this.
  13. Billy_Bottle_Caps
    Joined: Oct 16, 2007
    Posts: 276

    Billy_Bottle_Caps
    Member

    Great build. Love the look of the car. Hubcaps really set it off man


    Sent from my iPad using The H.A.M.B. mobile app
     
    voodookustoms likes this.
  14. tragic59
    Joined: Sep 16, 2002
    Posts: 766

    tragic59
    Member

    Do you mind sharing the contact info for your local hinge specialist?
     
  15. Shane Spencer
    Joined: Oct 3, 2009
    Posts: 2,160

    Shane Spencer
    Member

    Cool bracket man, engine bay looks great. Hey outta curiosity how much clearance do you have between the front inner fenders and the top of your tire? Im not quite as low as you are and i think i can get away without raising my inner fenders up
     
    voodookustoms likes this.
  16. Thanks greengrenade. I've got probably an inch or two. But I did come down quite a bit. And the big tires make a big difference too.
    What are you doing to lower yours?


    Sent from my iPhone using The H.A.M.B. mobile app
     
  17. Shane Spencer
    Joined: Oct 3, 2009
    Posts: 2,160

    Shane Spencer
    Member

    I did aerostars and 2 1/2 drop spindles with the disc kit from drop n stop em. Think i have 3 or so inches of clearance so i might just rock it without raising the inner fenders. I got posies 3" leafs out back with 4" blocks but i dont think the springs are 3" really. I think its around a 5/6 drop total


    Sent from my iPhone using The H.A.M.B. mobile app
     
    voodookustoms likes this.
  18. chuckshomeservices
    Joined: Oct 21, 2011
    Posts: 76

    chuckshomeservices
    Member
    from mass

    Nice work! This is a great thread!
     
    voodookustoms likes this.
  19. dwest999
    Joined: May 19, 2013
    Posts: 85

    dwest999
    Member
    from Saline, MI

    Update?... love following this thread.
     
    voodookustoms likes this.
  20. Sorry not much of an update. My axle seals were leaking so I took that out and had it fixed. I haven't had any time to make more progress. But the hood will be going on soon, then I have to get the door hinges rebuilt.


    Sent from my iPhone using The H.A.M.B. mobile app
     
  21. flamingokid
    Joined: Jan 5, 2005
    Posts: 2,200

    flamingokid
    Member

    Anything going on lately with your Vic?
     
    voodookustoms likes this.
  22. dwest999
    Joined: May 19, 2013
    Posts: 85

    dwest999
    Member
    from Saline, MI

    Yeah... what's up... this has been a great thread... subscribers want to know.
     
    voodookustoms likes this.
  23. Robert Crosse
    Joined: Sep 10, 2014
    Posts: 156

    Robert Crosse
    Member
    from WNY

  24. greaser 35
    Joined: Feb 15, 2010
    Posts: 809

    greaser 35
    Member
    from FRANCE

    Yes,any update?????
     
    voodookustoms likes this.
  25. Hey guys. Sorry it's been a while.
    I guess I've been mostly preoccupied with these two beauties. [​IMG] Elizabella Renee and Scarlett Skye born April 10th.
    While we were in the hospital with them, I had my bumpers stripped, straightened and had the bolt holes filled by V&C Metal polishing in north Hollywood. They did a great job.
    [​IMG]
    [​IMG]
    Chrome will come later.
    I've been driving the car to work every day this week since I'm working a little closer to home now. [​IMG]
    I also got the hood installed a few weeks before the girls came. It still needs some adjustment, but at least it closes and locks now.
    [​IMG]
    I took that pic last week when I got to cruise with my dad. He came out from Phoenix to pick up that 40. He's owned a lot of cars in his life, but never a 40 ford. It has always been on his list. It was good to cruise around with him again. His plans are to put wide whites and chrome reversed rims on it.
    Mechanically, my car is pretty solid now. Runs and drives great. The windshield does need to be replaced, so after that, i will be able to focus on body work and modifications. I plan on doing a kustom grill treatment, molding the front fenders to the valence and body and rounding the hood corners. still deciding if ill be running any type of side trim.

    Sent from my iPhone using The H.A.M.B. mobile app
     
    Last edited: Jun 3, 2017
    bobss396, RockinRivi, TS057 and 4 others like this.
  26. flamingokid
    Joined: Jan 5, 2005
    Posts: 2,200

    flamingokid
    Member

    I guess we'll cut you a little slack,with the kids and all ;) The car is looking even better and the kids are cute,your life is dialed in.
     
    voodookustoms and Outback like this.
  27. 56longroof
    Joined: Aug 1, 2011
    Posts: 2,348

    56longroof
    Member

    Congrats on the girls. Their beautiful. Car is looking great.

    Sent from my SM-G900R4 using The H.A.M.B. mobile app
     
    voodookustoms likes this.
  28. Congrats on your daughters! Car is looking good, too.
     
    voodookustoms likes this.
  29. greaser 35
    Joined: Feb 15, 2010
    Posts: 809

    greaser 35
    Member
    from FRANCE

    Congrats for your girls!!!!!!
     
    voodookustoms likes this.
  30. RockinRivi
    Joined: Feb 12, 2013
    Posts: 72

    RockinRivi
    Member

    Love the pix, congrats on the twins great names u chose


    Sent from my iPhone using Tapatalk
     
    voodookustoms likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.