The first radiator shell I started with fit hood awful. So I had this brookville one fit pretty good but no radiator cap hole. So this is what I did Sent from my iPhone using The H.A.M.B. mobile app
Nice addition. Cowl vent , radiator cap, Attention to detail like this makes the difference between something I walk by at a show and one I spend time admiring and a few frames shooting. You may have said but I missed it if you did, do you have a color picked out?
use light pressure on the hood hold-downs as too much will warp the hood sides at the top louvers to the rolls for the side hinge rods. happened to me!
Me too I hate when they look thrown together. I plan on louvering the top also. Sent from my iPhone using The H.A.M.B. mobile app
Grill shell put back together and hood louveres laid out Sent from my iPhone using The H.A.M.B. mobile app
i started working on my rear push bar. going to make caps for the ends and weld right to the rear spreader
End of the long weekend and just finished putting steering box and spare tires mount holes in my frame. I would like to thank my friend Dave for letting me get the locations off of his original frame. I also got the top tabs located and ready to weld on frame work. I would recommend anyone buying a new glass body to have that done before you buy it. Sent from my iPhone using The H.A.M.B. mobile app
Haven't been doing anything but little crap on this car. So nothing worth posting until now. Started working on the top. Bought one of those universal top kits. With my surprise making one new piece and drilling a few holes. I don't think it looks bad Sent from my iPhone using The H.A.M.B. mobile app
I’ve been doing my least favorite job when building a car. Paint and body work. I have the whole car in the final blocking hopefully by next weekend I will have my buddy put color on it. Sent from my iPhone using The H.A.M.B. mobile app
Thank for the kind words. Lol on the punching fiberglass it had an aluminum skin on the truck lid. I won’t do that again the next time I would use a steel trunk lid. Here is a couple of pics with suspension Sent from my iPhone using The H.A.M.B. mobile app