Register now to get rid of these ads!

Technical 1950 chevy tire sizes

Discussion in 'Traditional Hot Rods' started by PeggySue, Feb 1, 2017.

  1. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    Tried doing a search but couldn't find. Planning on doing brake upgrade to disk in front. I have 14" all around now will have to go to 15. See the original 1950 were either 670x 15 or 710x 15 , with new sizes what is a good fit with out going to big. Right now my back 14's are 215x60x14, on 73 chevelle rear end/brakes. There's plenty of head room but kind of snug between brake drum and fender when taking off.
     
  2. southcross2631
    Joined: Jan 20, 2013
    Posts: 4,413

    southcross2631
    Member

    225/75 r 15 is about all that will fit easily on the rear check your backspacing on the wheel . You need to lift the chassis and hang the rear end and not put your jack under the rear end .Should give you the height and looks good. Used to take chevy centers knock the rivets out and put buick rims and reverse them and stick 8.20-15's
    on my 51 hardtop. Before you could get custom wheels.
     
  3. joel
    Joined: Oct 10, 2009
    Posts: 2,481

    joel
    ALLIANCE MEMBER

    I believe my sons '50 has 215/75-15 on it. Original 15 inch wheels. They look like 6.70s would look. Ican check tomorrow.
     
  4. FrankenRodz
    Joined: Dec 20, 2007
    Posts: 892

    FrankenRodz
    Member

    My '49 has 215/75-15s on stock rims. Looks pretty good.
     

    Attached Files:


  5. My '51 has 205/75/15, but I have a 3 1/2" offset "reversed wheel" ...... close enough to the fender where the skirts will rub the tires on turns. Skirts are left off the car.
     
    Last edited: Feb 1, 2017
  6. Schwanke Engines
    Joined: Jun 12, 2014
    Posts: 781

    Schwanke Engines
    Member

  7. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    Thanks for the information. Don't the stock rims have a 3" off-set? Right now with the 14's on the back I have hang rear-end for clearance between hub and fender when removing. Been thinking of maybe just changing the fronts for now to 15" when I up-grade disk brakes and booster because of $$$$$
     
  8. No, the stock offset is not 3".
    It is only 9/16" of an inch, certainly not much of an offset on factory wheels.
    See the chart below from GM Heritage files.
    upload_2017-2-2_17-18-39.png
     
  9. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    That rings a bell , remember reading something about that,thanks
     
  10. I run 14" all around on my 51. with a 73 camaro ft. clip on the car. The wheels are very close to the disk brakes but they do fit after a bit of grinding on the calipers. :)
     
  11. crosswindjoe
    Joined: Feb 17, 2013
    Posts: 18

    crosswindjoe
    Member

    I have 15/6 Speedway rally wheels with 205/70 x15 tires on my 1952 2 dr. Skyline Deluxe. They clear on the front (Camaro clip) and rear (Camaro rear on Posies springs)
     
  12. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    I have 73 chevelle rear end but original 50 front
     
  13. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    Update on rims. Started installing disc brake kit today, did one side mainly to see what my 14" chevelle rims would do, they fit perfect, saved some $$$$$
     
    pat59 likes this.
  14. Mr48chev
    Joined: Dec 28, 2007
    Posts: 33,934

    Mr48chev
    ALLIANCE MEMBER

    Probably 71 Chevelle Disk brake wheels to begin with. I had similar wheels on my 51 Merc with Camaro subframe and Chevelle rear for a long time.
     
  15. Boones
    Joined: Mar 4, 2001
    Posts: 9,691

    Boones
    Member
    from Kent, Wa
    1. Northwest HAMBers

    I like to run 205/70/15 with a wide whitewall on a 6 or 7 inch rim..
     
  16. PeggySue
    Joined: Sep 5, 2016
    Posts: 394

    PeggySue
    Member

    There either 71 or 73 chevelle rims. I like how the car squats with the lower profile 14", glad I didn't have to change for the looks and $$$$
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.