How many hemi owners on the board

1954 331 Chrysler in the corner..

 

57' 392, engine rebuild happening now and current discussions with others of secretly doing/hiding fuel injection.

May take more than a couple beers for this project.

 

Just 1 241 Red Ram.

 

Poly called Spitfire is a Hemi short block with Canted valve heads like BBC. Wedge is valves in a row like SBC. or later Mopar engines after 1958.The Poly Mopar can be a Hemi with a switch of heads and pistons.

 

Tres....'92 with four deuces and two 354 industrials on stands with clutches, irrigation pumps. Ran on natural gas at about 2200 rpm

 

Here's my "Plymouth" 354

 

Like the Holley 3-bbl I run on my 354. Totally ridiculous but AWESOME!!

 

I thought they went to the short bell housing for all Chrysler hemi sizes in '54. Probably a carryover from the '53 production line that got put into the '54.

 

Good call !

Got one I'm just finishing off.

 

Where is is the "boner" button on this thread!?

 

Only the early hemi based Polys, not the later 318 poly family

'54 NYer was supposed to get the 331 2 bl engines & the NY Deluxe & Imperials were supposed to get the 331 4 bl, seems most all of them got the 4 bl engines.

 

Count me in! 241 Dodge. Love this little engine.

 

Very low production ?

 

One of none!

 

I only have two '56 354 Chrysler Hemis. One will probably to to my machinist. The other one will go in my Model A.

 

Is this a Hemi, I'm not sure.
;-)))

 

Here's some

 

I have one I was considering using, a 330 DeSoto. I have the short block rebuilt, just need to do the heads and button it up. Its still uncertain what car I will put it in though.

 

I have the good fortune to have a nice 392 out of a 1958 Imperial and a 354 from a 1957 Chrysler ...

 

Got a 392 out of a 1957 Chrysler New Yorker. Savin for a rainy day.

Sent from my SM-G925I using The H.A.M.B. mobile app

 

• Here is an update. Dads 392 with a Jr. Thompson 1/2 inch stroker crank and PAW intake going into his 1937 Dodge coupe gasser. We hope to fire it up before the spring.

 

I have a 426 in a '66 Satellite...too new to count though, apologies.

 

1957 300 "C" 392 Runs Great, About 4000 miles on new rings and bearings, Race Cams Inc cam, solid lifters
original adjustable rockers. and much more.

It's for SALE !!(The Whole car )

 

55 chrysler 331 I'm putting in my willys pick-up

 

.
Plan B actually my planA ,got sidetracked for a while.Just waiting for the Pistons etc to turn up so I can build this up..

 

this hemi










is going in this car

 

This engine this car


Sent from my iPhone using The H.A.M.B. mobile app

 

'34 ford sedan, '54, 331