Not sure I should be asking this but I don't know why and I am curious. Why one spot light on the front frame rail and does it matter which side?? I've seen both. Its a cool look for sure.
OK, I get it. I was thinking maybe there was some deep spiritual thing going on here. You know like in the Harley world someone gifts you a small bell to hang off your bike to ward off evil...
They also come in handy when you can turn all the rest of your lights off and just have that on to see the road when your running from the law. That's why you put them on the drivers side. Or should I say back in the day when your A model ford was souped up and the law couldn't catch ya anyway.
I had my fog lamp shipped over from the USA because it is a genuine 1950s item, I think they look cool. Cheers, Ron.
I think "protocol" requires a fog lamp on one side and a driving light on the other side, but as hot-rodders we've always thumbed our noses at "protocol".
I think this question gets asked every few weeks, I know it came up recently. What is funny is you will see as many cars with them mounted on the passenger rail as the drivers. On my Tudor I have the mount on the pass. side, I did this due to all the deer in the ditches here. I realized with my former daily that the right side fog was wayyy more important in lighting up the ditch that the left side light.
I bought a set and put one on each. I like them as I run them as daytime running lights which is mandatory here for all new vehicles.
Thanks for stating it's purpose. Saying that it's there for a reason and then not stating that reason doesn't help.
I had 2 fog lights but modified them,they could be used for their intended use driving/fog lights but they also served as turn signals. HRP
Generally speaking a yellow lens is a fog light, a clear lens is a driving light and a cowl or roof mount adjustable light is a spot light. Supposedly yellow light is reflected back into the drivers eyes by fog less than white light and should be mounted as low as possible.
Years ago I had a friend who fitted a switch in the tail/brake/license light circuit. He liked to drive fast.
I always thought the amber light was a fog light so it was on the passengers side to see the edge of the foggy road. The clear light was the passing light. It was located on the drivers side,it warned the car in front your passing plus light up the passing lane.
I grew up in the central valley where it gets very foggy in the winter. Most all the cars in the mid 50's had two fog lights. Ours did as did my grand mothers Buick and mu Uncles Pontiac. Old mans truck had em too.
Passing lights are mounted way out on the driver's side, like in-line with the wheel, and are generally clear and very large. The idea being you could peek around the vehicle in front of you without having to pull half way out into the opposing lane. Think of how close to the center of the car the headlights are on a 20's or 30's car, the drivers side headlight is actually to the right of the driver.
I think the idea if a single fog light had to do with depression era cars, and one light was better then none. I have no proof of that obviously and my contacts that I could actually have asked are long gone, but to me it is a logical reason.