Art & Inspiration The Photoshop thread to end all Photoshop Threads!

Was curious what a '59 Caddy would look like if the angle of the tail fin went all the way up to the top. Very Imperial-ish.

 

Maybe I'm just tired of seeing '59 Caddies, but that's damn sexy and a huge improvement!

 

Slight roof chop and rake on the rear of the top and maybe rear skirts. Not sure about the wheels either. Picture found on the net but more custom could be cool.

 

I like the caps/wheels, What is it? Cadillac?

 

A little rework to the rear of the roof using madfish's rendering

 

Make this into a wagon please and thank you

 

That's kool


Sent from my iPod touch using The H.A.M.B. mobile app

 

Hi Moose. Could you color the 2 photos of my RPU in with the front fender color please? Thank you Moose. Bob....

 

a few additional tweaks in addition to the above ones. .

 

Takes skills to put shadows and reflections into a Photoshop job, but to match the level of blurryness like this is also impressive.

 

Here's one....

 

And the second view

 

Definitely better without the whitewalls.

 

Some years ago I bought an old 53 Nash 4 door and played around with a little photo shop program....wanted to see what it'd look like slammed and then with the car shortened...looks like a huge Metropolitan!

 

Thank you very much Moose for your time. I appreciate it. Bob............

 

Lower it


Sent from my iPod touch using The H.A.M.B. mobile app

 

Thankyou Madfish and Moose! Looks even cooler!

 

I'd like to see a HAMB-friendly kustom based on these modifications, but using a proper photo. Maybe clean up the proportions a bit in the process. Any of you PhotoShop masters up for the challenge?

 

Something a bit different

 

Here's a few tweaks I'd like to make to Mooses photoshop rendition.

 

And here's its ugly cousin.

 

Just put a little lipstick on her.....

 

Looks like a cucumber with wheels.

 

Yes but a very fast cucumber...

 

Looks awesome Superleggera! A friend posted a picture of it on FB and thought it needed a tweek. Thanks man!

 

Just replace the wheels and tires with whitewalls, and I think we've got what I was after!

 

Oh dear Lordy.. dats splendorific!

 

I'm back with another request. Madfish did this for me awhile ago. The real car is getting closer. The color will probably be a hunter green, not two toned.

I posted this version because the detail is more visible. What I'm considering is the side lovers on the hood.
The story is that when the GM brass was making the final approval on this detail that the drawings were laying on a table and when they were signed, the signatures were upside down. So, the louvers wound up being 'upside down'.
After searching I could only find one example of someone flipping them. (Which I believe involves cutting a section out of each side panel and flipping them side to side.) In this instance, the section was also lowered. What I would like to see is the louvers with the side 'bubble' reversed in place. And as an option, just the louvers switched leaving the 'bubble' in it's original orientation. Finally, the stainless trim. I would like to see it on and off in each version.

Here is the hood side from the actual car. I have the material to make two complete hoods, one with the modification and one stock. I just don't want to cut up metal until I see what it is going to look like.
Thanx in advance,
Bruce