Projects ya gotta start somewhere.

Its got teeth

 

One more

 

OK, First ..You have got mad Skills! Really dig how this is evolving!! An will be following, But I must say, I see M-38 jeep grill here.. But I also have restored way to many...MHO

 

lol. I have been thinking on this for a while and its past time to do it. Next will be the firewall and then the rear of the cab.

 

So it will be a Modified? Or RPU? Bad Ass whichever way, those headlights are Wicked!

 

Starting on the firewall

 

RPU. Still not sure about those lights. I have alot of other stuff to finish before I get back on them.

 

Fire wall is done

 

Few more. Ill cut out for the trans tunnel later.

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Took a few tries to get the rear cab quarters to look right.

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Lookin' good- Bigger rear tires??

 

Loving it and especially the cowl / tank top fab. I've got a 29 coupe and I'm thinking of a tilt grille shell / sides / hood all in one piece - like a gasser hood. It would be great for maintenance. Ever consider that? Gary

 

I like it! I like the shape & proportion of the bed in comparison to the cab. I think the right choice of trim lines ( when you get that far) will really make it pop. What is the measurement from the firewall to the grille? I'm trying to get an idea of what the wheelbase is going to be? I'm guessing somewhere around 95 to 98" ? Do you have any concept drawings, or are you just winging it? Either way it looks great, & I'd like to see more. Thanks.

 

9ft center to wheels. That however might change. Im gonna finish the body and hood before I make the chassis.

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Absolutely! But no cheater slicks for me this time way too slippery in the rain.
I love the excelsior's butt they're a bit pricey.
any ideas on wheels and tires is much appreciated.

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Very nice.I`ll saddle up for the ride.
Good luck.Have fun.Be safe.
Leo

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Hammerform for back of the cab

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

I changed the back of the
bed it looked like it needed some more shape.

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

If finished out well

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Very nice.

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Sent from my LGMS550 using The H.A.M.B. mobile app

 

A good buddy of mine lent me a vixen file it works very well!

Sent from my LGMS550 using The H.A.M.B. mobile app

 

Very ambitious. I'll be watching. Being your business medium is aluminum, that probably keeps the price of material down to a certain extent?