Technical Please help me! 41-48 Ford

Hey fellas! Please check this picture. If you can, pleaselet me know this 2 dimensions!
Thats would be a great help for me!
Thanks

 

I'm sorry, but I have no idea whatsoever what I'm looking at in your pic.

 

Looks like the left side lower front door pillar/cowl section. Sorry, I don't have a car on hand to measure.

Ray

 

Maybe @Tim can chime in his is in the garage and handy.

 

Ok. Many thanks. I will write for him.

 

I texted him for ya.

 

On my 46 coupe, the narrow dimension at the top is 3.25cm, and it's 4.5cm wide at the bottom. Hope that helps.

 

Yeah I can measure when I get home
If that ^ isn't correct. What exactly it? Looks like drivers side cowl area but can't tell if it's the inner fender or the cowl it self

 

Oh wait I see it now, is the bit of cowl that sticks out in front of the front door. Is that correct? I'm asking so I know weather to measure parts on the car or extra parts off the car. I'll measure tonight just to confirm whatever is posted during the day as I know there's always a little variation car to car

 

I checked on the photo, but it was a little bit thin. The width of the upper and the lower edge needed on lower corner of the cowl side. Yes front of the front door.
Thanks for all.

 

Thanks, i will check it.

 

Yeah sounds about right I forgot until I was rushing out the door this morning and it looks roughly 1 3/8 on the top and 1 7/8 on the bottom. That's in inchs but I think that lands fairly close to the metric given yesterday