Hot Rods 1930 Ford model A pickup build

Progress

 

before and after 4inches removed. The man who is finishing this goes by the name Lonewolf, based out sandiego California. Very talented

 

Cleaned up the chop and moving on to rust repair.

 

Looks awesome!

 

Great project! Keep the pics coming.

 

thanks

 

Decided to do cowl steering with the F1 box I had laying around.

 

Looks good so far. I may have missed it did you decide to go twin carbs or trips? I would run the twin carbs myself. I really like the wide 5s, you just don't see enough of them used anymore.

 

I'm gonna run 2carbs so that I can keep the old generator in the stock location

 

Looks cool. I also wanted to use my bed, yours is lower but we've got a similar spring setup. What are you planning for a fuel tank? I put mine in front of the kick-up...


Aaron

 

I am mounting a 10-12gal spun tank in the bed, behind the cab..I really like your idea for tank placement..looks bitchn!!!

 

Finally getting around to some floors and a pretty significant tunnel do to the body channel

 

A bit more progress. Taking a lot longer than expected as we encounter curve balls...
The infamous struggle of pedals. Running a hydraulic TO bearing..
Thanks to the encyclopedia of hot rodding " ,"the hamb", I added this torque arm to strengthen things up.."substituting a torque tube". Not pictured, but we also welded up some diagonals to strengthen my transmission cross member.

 

Any more progress?

 

very cool