Register now to get rid of these ads!

Art & Inspiration <<<< Friday Art Show 5-16-14 >>>>

Discussion in 'The Hokey Ass Message Board' started by 57 Corvette ~ Bob, May 16, 2014.

Thread Status:
Not open for further replies.
  1. What an astounding array of bad-assery so far! You guys always make my Friday! :D
     
  2. 57 Corvette ~ Bob
    Joined: May 20, 2009
    Posts: 1,937

    57 Corvette ~ Bob
    Member

    Frogz, thank you ......... very cool bus. When I become a rock star, I want that as my tour bus.

    Gary C, very cool bike ..........

    Kingpins, love that watercolor ........

    Wild Willy, very cool work Bill ........

    Me.Gasser, thank you Wanda ..........
     
  3. GaryC.
    Joined: Mar 24, 2007
    Posts: 1,557

    GaryC.

    Thanks for your comment on the Indian Scout Hot-Rod Dude.
    You mentioned that you're getting a Henderson. Here's a 1924 Ace, grand father to the Henderson,

    great grandfather of the Indian. Good luck with your new wheels! Ace in the hole.jpg
     
    Last edited: May 16, 2014
    swade41, aar0s, Jeff Norwell and 4 others like this.
  4. Ryan
    Joined: Jan 2, 1995
    Posts: 21,633

    Ryan
    ADMINISTRATOR
    Staff Member

    I got one related to the new design... See that ribbon up top? I was inspired by the ribbon found inside the Jalopy Journal book. I tried scanning the ribbon and using it, but it didn't look right. So, I decided to illustrate the ribbon - pixel by pixel. Took me 8 hours...

    Here's a zoomed shot of my pixel work:

    rib2.jpg

    Those of you familiar with pixel work will know that it takes VERY little talent to pull something like this off... But it does take a whole lot of patience!
     
  5. Mister Dave
    Joined: Jan 15, 2014
    Posts: 81

    Mister Dave
    Member
    from Aurora, IL

    This week's 3D prototype model:

    [​IMG]
     
  6. straykatkustoms
    Joined: Oct 30, 2001
    Posts: 22,308

    straykatkustoms
    ALLIANCE MEMBER

    This almost as bad as McPhail's dot work. Very Kool!
     
  7. LexanRaceCarBrush 007.jpg LexanShark 001.jpg LexanRaceCarBrush 007.jpg LexanShark 001.jpg Hope these come through;I haven't tried uploading any pix with this new format. Here's a couple of Lexan creations using scrap pieces from making my striping brushes.A striping brush race car using 1" round Lexan rod for tires and stainless steel snaps for wheels. Second is a shark with a striping brush for a dorsal fin.
     
    Jeff Norwell likes this.
  8. Muttley
    Joined: Nov 30, 2003
    Posts: 18,500

    Muttley
    Member



    Attention to detail..........you have it.
     
  9. Sage
    Joined: Apr 8, 2008
    Posts: 135

    Sage
    Member

    Got mine that Dave sent me (another excellent job Ron).
    Here's what I sent down for the Shop Party/Open House last week in trade.
    [​IMG]
    Oddly enough, and without knowing what this year's artwork was to look like, I also went with a blue theme. Hmmm.
     
    WhateverWeber likes this.
  10. LOWCAB
    Joined: Aug 21, 2006
    Posts: 1,989

    LOWCAB
    Member
    from Houston

  11. senone
    Joined: Jan 18, 2014
    Posts: 60

    senone
    Member
    from Belgium

    Love the use of colour on this one, came out awesome!! :)

    Posted using the Full Custom H.A.M.B. App!
     
  12. senone
    Joined: Jan 18, 2014
    Posts: 60

    senone
    Member
    from Belgium

    Here's my contribution for this week....
    Done for an art show called "skate and create" at the frontlight gallery in Sweden. Painted a playing card done up with all influential artwork mixed into one. All 1-shot on painted canvas. Got a thumbs up from Jimbo Phillips on this one which was a nice surprise!



    Posted using the Full Custom H.A.M.B. App!
     

    Attached Files:

    WhateverWeber likes this.
  13. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 31,179

    Jalopy Joker
    Member

  14. Speed Freak Terry
    Joined: Jan 30, 2014
    Posts: 29

    Speed Freak Terry
    Member

    image.jpg image.jpg image.jpg Here's my Friday special....
    One of my SALT sculptures. No room on your shelves and cabinets?
    Stick it on the wall!
    Note the speed at the bottom and the dried salt base....
    To keep up with my latest edition go visit Speed/Still, my face book page or speed-still.com
     
    MrMopa, GaryC., Unkl Ian and 8 others like this.
  15. Awesome inspiration.
    Thanks everyone for sharing.
    Couple of update pics and some detail.

    [​IMG]

    [​IMG]
     
  16. BOMONSTER
    Joined: Jul 14, 2008
    Posts: 516

    BOMONSTER
    Member

    I dig the little kustom strollers and pedal cars running around the shows lately. Here's one I scratched for the upcoming Ventura Nationals which will feature a special section for them.

    bomonster-ventura-pedal.jpg

    I also like the new "post a photo directly to the post" option in this new HAMB Version 7.
     

    Attached Files:

    ProEnfo, GaryC., Jeff Norwell and 4 others like this.
  17. That's impressive!
    Love the wall sculpture! :cool:

    Lovin' the new layout Ryan!
     
  18. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 14,810

    Jeff Norwell
    MODERATOR
    Staff Member

    New Stuff Old stuff.. digging the Instagram feature…

    [​IMG] [​IMG] [​IMG] [​IMG]
     
    HEMI32, ProEnfo, GaryC. and 7 others like this.
  19. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 14,810

    Jeff Norwell
    MODERATOR
    Staff Member

    Work for Bree FINAL RUST 04.jpg der and the Kropduster Krew ….this weekend the Rust Revival...
     
    HEMI32, GaryC., Merlin and 4 others like this.
  20. 76ironhead
    Joined: Mar 12, 2009
    Posts: 504

    76ironhead
    Member

    Speed freak terry that picture is awesome.
     
  21. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 14,810

    Jeff Norwell
    MODERATOR
    Staff Member

    Crafty B and his Manical Metal Crafting…. CB FINAL 001A.jpg
     
    ProEnfo, Merlin, KCsledz and 4 others like this.
  22. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 14,810

    Jeff Norwell
    MODERATOR
    Staff Member

  23. An artwork and color test piece for a larger piece I am recreating. Laser cut matte board.

    IMG_20140509_064735_912.jpg

    IMG_20140509_064812_945.jpg
     
    senone, KCsledz and Jeff Norwell like this.
  24. gnichols
    Joined: Mar 6, 2008
    Posts: 11,345

    gnichols
    Member
    from Tampa, FL


    Very nice piece... just amazing. Got any more of these "sculptures" to share? Gary
     
  25.  
  26. 55Belairman
    Joined: Jan 11, 2013
    Posts: 445

    55Belairman
    Member

    I really missed the FAS last week, but everything was worth the wait. Updated forum, and some awesome artwork. Thank you all for your great efforts.
     
  27. Mister Dave
    Joined: Jan 15, 2014
    Posts: 81

    Mister Dave
    Member
    from Aurora, IL


    Indeed.
     
  28. TOE
    Joined: Mar 22, 2006
    Posts: 597

    TOE
    Member

    Love the wall sculpture!

     
  29. hotrodpodo
    Joined: Jun 28, 2006
    Posts: 1,301

    hotrodpodo
    Member

    Outake image of Mike Allison's 392 Hemi powered Henry J gasser from my feature in the current Ol' Skool Rodz...

    Posted using the Full Custom H.A.M.B. App!
     

    Attached Files:

Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.