Wide 5 to 5 on 5-1/2" Adapter

Does anyone make an adapter plate to use Wide 5 wheels on a 5 nn 5-1/2" bolt pattern. I want to run these using my current 40 Ford drums and hubs. I've seen Dick Spadaro's 5 on 4-1/2". Does he make these for the early bolt pattern as well? Thanks

 

When I was looking a few months ago I saw some on Speedway but they were just for 5 on 4.5" and 5 on 4.75".

I never saw any 5 on 5.5".

I'd guess they had some back, "in the day". Maybe you could find some older ones somewhere.

Jay

 

go to any oval track store like Bicknell Racing Parts

 

Speedway goes up to 5 on 5 but no 5 on 5.5. I have the same problem. I bought the 5 on 5 , which is also drilled for 5 on 4.5, in hopes of redrilling to fit my 5.5 ford hubs. But have not gotten around to it yet.

Here's an adapter that is 5 on 5.5 http://www.pitstopusa.com/detail.aspx?ID=65 but I don't know anything about it.

Here's another one on this page, but its a little spendy, http://www.hrpworld.com/googlebase.cfm?key=Wheel%20Adapters%20-%20Real&form_prod_id=,297,299,_730&action=product

 

Just switch drums

 

I built mine:

 

Check THIS site out, they make them for just about anything.....joe