Register now to get rid of these ads!

Event Coverage Steel In Motion, 2015! May 15 and 16, Union S.C.

Discussion in 'The Hokey Ass Message Board' started by Merlin, Jan 8, 2015.

  1. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

  2. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Zip Zoppity Zoo!!! So glad you are coming to SIM!!!
     
  3. stealthcruiser
    Joined: Dec 24, 2002
    Posts: 3,748

    stealthcruiser
    Member


    Uh Oh!!!!!!
    Josh........Tyler..........Litlle shakedown racin', perhaps?
     
  4. Looks like this year is going to be better than ever!!!
     
  5. dirty old man
    Joined: Feb 2, 2008
    Posts: 8,910

    dirty old man
    Member Emeritus

    Curtis, I could find only one thing to complain about last year and that was what you just pictured: Vendor's Row, and the problem is easily seen in that pic.
    somehow there needs to be a way to keep the crowd under a little more control there, as it's also the return road, if you,ve made a run and are returning straight back to staging lanes for another run. Even with fairly loud pipes such as the ones I have on BGII, it's difficult to get thru the crowd on vendor's row. Radical cams and resultant fast idle speed with a crowd totally oblivious to the fact that is also return road, often mean slipping the clutch to get thru that area. I got more than one dirty look from people who apparently just were thinking "Why is that asshole driving his hot rod down vendor's row in my way?" With open wheel cars and an uncontrolled crowd, it's an accident waiting to happen. Not if, but when.
    Maybe if the vendors were moved back a couple of feet and then cones and tape to designate a walkway???
     
    bigjohndsl, beachbum jim and Tudor like this.
  6. It was pretty sketch driving through there to the staging lanes - Kids, kids on scooters, people darting in and out - I did enjoy loo

    We lined up at Commerce - Tyler was having a little bit of a mechanical issue and I think it'll be resolved by this spring. Looking forward to lining up with MR. TYLER
     
  7. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member


    DOM, I couldn't help but laugh when I read you got dirty looks and folks may of thought you were an asshole!

    On a serious note...Vendors row is on the top of our list to make a change to improve safety and get the cars to the track smoothly.
     
    bigjohndsl and Tudor like this.
  8. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Flag Girls!

    [​IMG]
     
    Tudor likes this.
  9. Curtis. Will there be any test n tune on Friday?
     
  10. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Don't have any planned as of now but let me study that a bit. We have a band at 7 and 8, then the Cackle Crawl at 9:15.
     
  11. dusterdave173
    Joined: Dec 30, 2010
    Posts: 226

    dusterdave173
    Member

    I snagged a room at the local hotel for Friday so I will be ready to run Friday night if it is open though a laid back cackle deal would really be as much fun as I have not done one yet ( except in my back yard)
    Man! I can't wait!!! I have promised Cassandra she can design my paint and will be getting up with her this wk end but can't promise it will be on by then --but SURE hope so!!
    I am still licking my wounds from near 3 years of building the thing--OK honest-- I have made the wife so many promises since I said it was finished ugh.....:) She loves me I will probably have paint by then
     

    Attached Files:

    tylercrawford likes this.
  12. A few more from last year...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Jan 15, 2015
    Dog_Patch and tylercrawford like this.
  13. tylercrawford
    Joined: Jan 30, 2011
    Posts: 726

    tylercrawford
    Member
    from Buford, GA
    1. S.F.C.C.

    Yeah, I gotta get my butt in gear now that I finally have a little time here.

    Need to get the blow by issue sorted out for sure. Also need to start it on 90% nitro before the cackle crawl. I would rather my "first time" not be in front of a bunch of people I don't know :D
     
  14. dusterdave173
    Joined: Dec 30, 2010
    Posts: 226

    dusterdave173
    Member

    Here ya go!
     

    Attached Files:

  15. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Tyler, your FED already sounds killer, the NITRO is going to put it in another level of bad ass!
     
  16. Merlin
    Joined: Apr 9, 2005
    Posts: 2,545

    Merlin
    Member
    from Inman, SC

    Like this pic, Genes one man army.
     
  17. Merlin
    Joined: Apr 9, 2005
    Posts: 2,545

    Merlin
    Member
    from Inman, SC


    Still nothing from the Iron Lords? Maybe they have turned into
    kitchen cookware. :p
     
    stealthcruiser likes this.
  18. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Now that is funny right there!
     
    Merlin likes this.
  19. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

  20. Merlin
    Joined: Apr 9, 2005
    Posts: 2,545

    Merlin
    Member
    from Inman, SC

    Just an off question from a friend of mine. Do the southeast gassers accept challenges from others not in their group?
     
  21. dusterdave173
    Joined: Dec 30, 2010
    Posts: 226

    dusterdave173
    Member

    Cassandra comes through! Now I just have to decide which one--love them all leaning towrd the blue--engaged her to design my new dragster paint--WOW! Very happy with her ideas--Thanks Speedychick Design / Cassandra Hicks in SC
    Hope to have it in color before SIM!!!!
     

    Attached Files:

    Dog_Patch, Merlin and tylercrawford like this.
  22. Man that girl's got talent. :) I like the one with the clock numbers.
     
    David Walker likes this.
  23. Merlin
    Joined: Apr 9, 2005
    Posts: 2,545

    Merlin
    Member
    from Inman, SC

    Same here very cool.
     
  24. Geargoyle Curtis
    Joined: Nov 6, 2009
    Posts: 582

    Geargoyle Curtis
    Member

    Oh Yeah, any of them will look great!
     
  25. Quain Stott
    Joined: Nov 21, 2006
    Posts: 2,058

    Quain Stott
    Member

    Merlin anyone that meets the rules are welcome to run in our group so there would be no need to run outside the group just come to one of our races we would be glad to have them. If your friend has a car that is not a period correct gasser I have another car that is not period correct that I will be glad to do some out side racing for the right money. It's an old 1963 vette.
     
    bigjohndsl and chevydeucewagon like this.
  26. Merlin
    Joined: Apr 9, 2005
    Posts: 2,545

    Merlin
    Member
    from Inman, SC

    Ok thanks Quain, I'll let him know.
     
    Quain Stott and David Walker like this.
  27. 63 1/2 peregrine
    Joined: Feb 12, 2014
    Posts: 16

    63 1/2 peregrine
    Member

    had a great time at this show the last 4 years geargoyles do a great job of putting on a top notch event glad to b a part of it lets do our part and spread the word
     
  28. motoandy
    Joined: Sep 19, 2007
    Posts: 3,334

    motoandy
    Member
    from MB, SC

    Once again looking towards a good time. Should have a caravan coming out of the myrtle beach/Conway / loris. Looking forward to the beach bums and the maiden voyage on his bad ass 52 Chevy!!!!
     
  29. Been thrashing hard to get her ready! Looks like im gonna have some decent weather this week so I should get alot done!!!
    Mrs BeachBum and I are looking forward to SIM!
    WP_20141009_005.jpg WP_20150204_004.jpg
     
  30. dusterdave173
    Joined: Dec 30, 2010
    Posts: 226

    dusterdave173
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.