Register now to get rid of these ads!
Auctions

NEW Astro / Howard style CHROME SLOT wheels

Discussion in 'Parts For Sale' started by Phillips, Apr 6, 2015.

  1. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    City: Milwaukee

    State: Wisconsin
    Price: 275.00
    NEW Astro style chrome steel slot wheels are available again. Wheels are stamped, polished, plated and assembled in the USA. All wheels are made to order, so no extra charges for custom backspacing.

    Wheel center hole is standard, takes original Astro center cap, as shown, or many other aftermarket caps. Note caps and lugs are not included, wheels take standard acorn style nuts.

    5 on 4.75 (Chevy, small GM pattern) and 5 on 4.5 (Ford, Mopar, AMC, plus others) 5 on 5 (big GM, Buick, Olds, Pontiac) 5 on 5.5 (Pre-'49 Ford, Ford F-100 up to 1996) are available. Also now have 4 on 4.5 (4 bolt Falcon, Maverick, Mustang, Chevy II, Corvair, Datsun).

    Available rim widths range from 4.5", 7", 8" and 10" wide in 15" diameter. Some 14" are available as well, please see below. Pricing listed is for 15x7. Pricing varies according to sizing and finish, shipping is extra please ask for quote.

    I also have a limited number of 14" 4.75 and 4.5 bolt pattern centers as well as 7" wide both deep reverse and standard offset rims - perfect for the period low rider.

    Full raw steel, powder coated, and raw center/chrome rim also available, please PM for details. 50% down required to start order.

    PM or email [email protected] Please mention you saw this on the HAMB if you email me.

    THANK YOU!

    63 Rivi9.jpg
    IMG_8673CROP.jpg IMG_8676CROP.jpg
    IMG_8669CROP.jpg
    IMG_1511CROP.jpg
    IMG_1512CROP.jpg
     
    Last edited: Feb 26, 2022
  2. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

  3. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Bump, thanks all!
     
  4. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Bump, be first on your block with a set of new chromies!
     
    Superolds and James Lud like this.

  5. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    mike Berglund likes this.
  6. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Bump and thanks to the HAMB.
     
    James Lud likes this.
  7. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    BTT Thanks.
     
    James Lud likes this.
  8. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Some recent orders, top set is 15x8 rear, 15x4.5 front. Lower photo is an example of a magnesium tone custom powdercoat. Thanks!

    11901070_949746868416038_1358532290_o.jpg 11939939_949746865082705_1121811116_o.jpg IMG_1776.JPG
     
  9. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    6" wide 15" rim size now available! Thanks all.
     
    James Lud likes this.
  10. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Bump to the top! Lots of custom options, PM for pricing or more detail.

    Thanks!
     
    James Lud likes this.
  11. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Many options - below are some raw steel 15x10 with a deep backspace to get a nice tucked in tire, and 15x8 with a bright white powdercoat.

    Thanks!

    IMG_2001.JPG IMG_2003.JPG IMG_2010.JPG
     
  12. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Some new photos. These are 15x10, deep reverse, 5x5 bolt pattern with a large center bore for Buick hubs.


    IMG_2197.JPG
    IMG_2208.JPG
    IMG_2194.JPG
     
    Last edited: Mar 18, 2016
  13. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

  14. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Hot weather bump - also I now have some 5 on 5.5 (big Ford) centers for 15" rims available!

    Thanks all.
     
    James Lud and -Brent- like this.
  15. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    We now have some chrome 14" hoops, and 14" centers in both 5 on 4.5 and 5 on 4.75 bolt patterns for the true '60s low look!
     
    Snicklefritz65 and James Lud like this.
  16. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Thank you bump and a new shot. This is a pair of 5 on 5.5 (big/early Ford) bolt pattern 15x8. Click for an even bigger image. Thanks!

    15x8 5.5 BC.jpg
     
  17. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    I have some 14" 4 on 4.5 centers on the way - these will fit Ford Falcon, early 4 bolt Mustang, and Chevy II / 4 bolt Nova, plus some OT stuff as well.

    Thanks all.
     
    Snicklefritz65 and James Lud like this.
  18. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    [​IMG][​IMG]

    Couple shots of the 4 on 4.5 centers. Note these have not been chrome plated, just polished and ready for plating.
     
    Tman, James Lud, EVL401 and 2 others like this.
  19. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Still at it! We've got a few 5 inch wide hoops in, available sizes now include 14x7, 15x4.5, 15x5, 15x6, 15x7, 15x8, 15x10, 15x12. THANKYOU!
     
    Snicklefritz65, Tman and James Lud like this.
  20. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

  21. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Still at it! Stay healthy everyone!
     
  22. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    unnamed.jpg 15x10 with a custom matte metallic silver powdercoat. That speck by the slot isn't a flaw, its a fly.
     
    mrspeedyt likes this.
  23. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Got a fresh stack of centers stamped, 5x5.5 (pre-49 Ford, Ford 1/2 ton up to '96) and 4x4.5 (Falcon, Corvair, F-85, Tempest, Datsun, etc.) Get 'em while I got 'em.
     
  24. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    Bump with a fresh 15x10.

    [​IMG]
     
    winr likes this.
  25. Phillips
    Joined: Oct 26, 2010
    Posts: 1,501

    Phillips
    ALLIANCE MEMBER

    A couple action shots. Thanks Mitchel and Troy!

    08D52EFC-A4B4-4957-8A63-E51D19BC4CA5.jpeg image0.jpeg
     
    Snicklefritz65, fauj, EVL401 and 4 others like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.