Register now to get rid of these ads!

  1. Hey Fellas, excuse the spam... But, we've got some new swag in the store! In fact, we've got a real rarity - H.A.M.B. Drags Merch!!! Hats, shirts, key fobs, the works... To check it out, just head on over to our store. CLICK HERE!
    Dismiss Notice

Go Drag Racing

Discussion in 'The Hokey Ass Message Board' started by Ryan, Jul 24, 2007.

  1. Ryan
    Joined: Jan 2, 1995
    Posts: 16,962

    from Austin, TX
    Staff Member

  2. I should have just loaded it up when I was out there last time.
    I'd put a Flathead or staight six/eight in it the way it is.
    Anything more would need a stronger third member.
    If you started the thrash today, you could run it at the HAMB Drags at the end of August.
  3. zman
    Joined: Apr 2, 2001
    Posts: 16,536

    from Garner, NC

    I'm telling myself that I REALLY don't need it... I just need to keep on telling myself I don't need it....
  4. Take the front axle off and slide it on next to the Anglia.
    I'm a real big help, huh?
    Register now to get rid of these ads!

  5. Don Moyer
    Joined: Jun 2, 2005
    Posts: 3,493

    Don Moyer

    I really need that......if only it were close.. Bob, I think you should hang on to it for Detroit.......Don
  6. bowtiemyk
    Joined: Feb 3, 2005
    Posts: 173


    Bob, I'm realll tempted, even got a flattie looking for something to pull around
  7. Is that a banjo rearend ? Are there axles in it ? Is the tubing mild steel or 4130 ? How does the welding look ?

    I ran low 9's with my direct-drive 413 inch Pontiac ahead of a '35 Ford 4.11 banjo without a problem.

    It looks to be a very well put together piece.
  8. RacerRick
    Joined: May 16, 2005
    Posts: 2,743


    I would run a SBC with stack injectors on alky, narrow slicks, a PG, and go for a jr. fueler look. It should run low 10's with no reliability issues.
  9. Degreaser
    Joined: Nov 9, 2006
    Posts: 936


    I really can't believe someone hasn't snagged it yet. If I could, I would.
  10. bobbleed
    Joined: May 11, 2001
    Posts: 3,026

    from Awesome

    SOLD!!! Damn....... thanks Ryan..... I was going to put an OLDS in it .......
  11. Ron Mayes
    Joined: Mar 24, 2006
    Posts: 685

    Ron Mayes

    I had to have it ...........probably put a flathead or hilborn injected 215 Buick in it.
  12. 1950ChevySuburban
    Joined: Dec 20, 2006
    Posts: 6,211

    Member Emeritus
    from Tucson AZ

    292 six Chevy with all the goodies........ Sissell head, zoomies, etc....
  13. von Dyck
    Joined: Apr 12, 2007
    Posts: 667

    von Dyck

    JohnnyFast: '46 to '52 3/4 ton yokes same as '42 to '47 1/2 ton yokes.
  14. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,034


    That's where my head went too.
  15. Thanks, man....I'll check into that ! :)
  16. Rosemarry
    Joined: Jun 21, 2010
    Posts: 1

    from NY

    I have to give fair warning about the pictures that we show after the break, because you might not like what you see. After yesterday's conversation about RuPaul's Dragulator, listeners Derrick and Paul took it upon themselves to create their versions of Natali and The 404 in drag! Click at your own risk.

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.