Register now to get rid of these ads!

Ford Fairlane thread, anyone?

Discussion in 'The Hokey Ass Message Board' started by Blades, Jan 14, 2010.

  1. Wow! Nice one. What kind of engine is in it?
     
  2. SWEET :cool:

    GREAT Thread Blades :D

    Jim




     
  3. meteorgasser
    Joined: Oct 29, 2006
    Posts: 189

    meteorgasser
    Member
    from Lodi, Ohio

    here are our 2 fairlanes they are future projects but still drivers


    [​IMG]

    [​IMG]

    [​IMG]
     
  4. 6t5frlane
    Joined: Dec 8, 2004
    Posts: 2,400

    6t5frlane
    Member
    from New York

    Clean looking lane...........Kudo's
     
  5. stlrider
    Joined: Nov 9, 2008
    Posts: 108

    stlrider
    Member

    Single side stripe came on the strip model 62s. The 500s had the extra trim on the sides and across the back along with the teardrops on the quaters.
     

    Attached Files:

  6. stlrider
    Joined: Nov 9, 2008
    Posts: 108

    stlrider
    Member

    Blue gasser has been bought and sold a couple of times on the HAMB.
    4 geter I found on the board a few months ago. Old race car with T-bolt front clip.
    Then some pics of my 62 strip model. Has 200 six and 3 spd out of a Falcon in it. Just picked up a 351 roller motor.
     

    Attached Files:

  7. Just Jones
    Joined: Jan 11, 2005
    Posts: 928

    Just Jones
    Member

    I've posted these before, but here is my project.

    No recent pictures, but I've been working on the front suspension to get the nose up as we're shooting for a street racer/gasser stance circa early 60s.

    Powertrain is a built 312 with 3x2, 5spd and '57 9 inch with cheater slicks out back. Will be green suede or maybe two tone green and white when done. Hopefully on the road this summer.
     

    Attached Files:

  8. GSX-PKV
    Joined: Feb 18, 2008
    Posts: 47

    GSX-PKV
    Member

    Here is an old photo of my 66 Fairlane GT 4 Speed convertible. I bought it brand new when I got out of HS. It was Springtime yellow with a parchment interior.

    It had a 335HP 390 and but was lacking the power needed to keep up with tri power GTO's etc, so I put a cam, headers, Mallory revpoll... etc... and eventually blew the engine! A valve hung up and hit a piston at the top of 3rd gear. My dad could not understand why anyone in their right mind would modify a new car :D It shut off instantly and the short block was trashed but the heads were still salvageable. I went to the Ford dealer to buy a new 390 shortblock and found they had a new engine, a 428, which was in the 67 Seven Liter Galaxies. The 428 was not much more in cost that the 390 so I bought one. I bolted on the HP heads, carb' etc... from the 390 GT engine onto the 428 and had the equivalent of a 428 cobra jet engine before they were "invented"!

    I traded it in on a new 69 Grand Prix in the fall of 68 in Chicago. I've never seen another one like it and if I did, I'd probably buy it.
     

    Attached Files:

  9. havi
    Joined: Dec 30, 2008
    Posts: 1,876

    havi
    Member

    4-geter came from me, and thanks on verifying the single strip.
     
  10. Don,t think there,s a Crown Victoria in here yet. I had this '56 about 25 odd years ago. Was the only one in the country at the time . Probably still is :eek:
     

    Attached Files:

  11. Falcon Gasser
    Joined: Aug 29, 2007
    Posts: 940

    Falcon Gasser
    Member


    Very nice, what are you running for engine/trans combination in it? Again it looks really good.

    Jon
     
  12. 69tincanfairlane
    Joined: Feb 17, 2009
    Posts: 290

    69tincanfairlane
    Member
    from UYA

    My 1969 Fairlane 500. Solid lifter 351W, 3000 stall FMX, 4.33 rears.
     
    Last edited: Jan 3, 2011
  13. shadetree63
    Joined: Dec 22, 2007
    Posts: 19

    shadetree63
    Member

    Nice to see so many Fairlane guys here-
    Here are a few of mine after 5 years of part time resto-
    Seattle area car,original paint,stripped to bare metal,originally 260 auto,now roller 302 T-5
    Crites hood & bumpers,American Eagle 5 spokes15x7,15x8
    with a set of body colored steelies from a wagon for the rear
    for nostalgia days-will be ready for my son's grad parade
     

    Attached Files:

    Last edited: Jan 30, 2010
  14. My ol' gal, owned since 1995, original survivor. It's a little thread bare in places and the paint is wearing thin too! Collect's many a road trophy and recently finished an 1100 mile roadtrip over 5 days with my son.

    [​IMG]
     
  15. Algon
    Joined: Mar 12, 2007
    Posts: 1,129

    Algon
    Member

    Anyone have information on the chrome hood scoop piece? The only thing I can find so far is it being on a car in an original Ford total performance ad. I'm guessing it to be an option but it seems odd not be part of a larger trim package such as the 500. These seem to be fairly uncommon on restored cars and my OE paint 500 wagon did not have it either.
     

    Attached Files:

  16. tnrotter
    Joined: Mar 15, 2009
    Posts: 294

    tnrotter
    Member
    from Tennessee

    I think it's part of the 'Sports Coupe' package. tnrotter
     
  17. Theo:HotRodGod
    Joined: Nov 23, 2009
    Posts: 565

    Theo:HotRodGod
    Member

  18. Theo:HotRodGod
    Joined: Nov 23, 2009
    Posts: 565

    Theo:HotRodGod
    Member

  19. Algon
    Joined: Mar 12, 2007
    Posts: 1,129

    Algon
    Member

    I think you are right, the one I posted is one and looking through some old ads closer all of them appear to be sports coupes. It's seems rare any more seeing a 64 without a teardrop let alone with the hood chrome. Thanks

    This is my wagon as I drug it home. The last owner had T-bolt clone parts and a 427 for it but gave up on the project. For now it's mostly stock, I'm going with a few period aftermarket parts and light custom touches.
     

    Attached Files:

  20. stlrider
    Joined: Nov 9, 2008
    Posts: 108

    stlrider
    Member

    Very nice and keep the original color.
     
  21. Blades
    Joined: May 25, 2006
    Posts: 1,188

    Blades
    Member
    from Chicago

  22. shadetree63
    Joined: Dec 22, 2007
    Posts: 19

    shadetree63
    Member

    it was never an option to change color-corinthian white looks best especially with a T Bolt hood
     
  23. here is my 65 Fairlane 500 station wagon. She do not currently look like this. The interior is completely gone and all the front sheet metal is off. I have fixed the rusted out right frame rail and drivers side floor pan. Hopefully this weekend I will be buying all the parts to rebuild the front end suspension.
     

    Attached Files:

  24. Blades
    Joined: May 25, 2006
    Posts: 1,188

    Blades
    Member
    from Chicago

    I think that wagon is bitchin! I kinda like wagons especially Fairlane and Impala. :D

     
  25. carlos
    Joined: May 2, 2005
    Posts: 1,387

    carlos
    Member
    from ohio

    my 55:)
     

    Attached Files:

  26. MP&C
    Joined: Jan 11, 2008
    Posts: 2,482

    MP&C
    Member

    Hot off the press, the owner had some t-shirts made up to match his car.



    [​IMG]



    [​IMG]
     
    Last edited: Feb 6, 2010
  27. sparky1562
    Joined: Feb 8, 2009
    Posts: 22

    sparky1562
    Member

    Here is mine. Getting close to fully torn down and on the rotisserie.
    Have to decide on engine. Considering the Fatman front suspension for it.
     

    Attached Files:

  28. greendream
    Joined: Sep 12, 2007
    Posts: 263

    greendream
    Member

    Here is my '59.

    [​IMG]
     
  29. 64Cyclone
    Joined: Aug 30, 2009
    Posts: 1,496

    64Cyclone
    Member

    Looking great....I wish my Cyclone was that far along.
     
  30. 1lowbuckrodder
    Joined: Mar 5, 2008
    Posts: 362

    1lowbuckrodder
    Member

    heres mine, x-racecar, put on the street,
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.