Register now to get rid of these ads!

Dashman's Hot Rod & Speed Parts

Discussion in 'The H.A.M.B. O'Dex' started by dashman, Aug 9, 2011.

  1. dashman
    Joined:
    Apr 15, 2009
    Posts:
    774
    Location:
    Viroqua WI

    dashman
    ALLIANCE MEMBER

    We are a small shop in Viroqua Wisconsin that offer custom parts for your Hot Rod needs. From blower adapters to carburetor phenolic insulators for heat soak problems. We offer excellent products for a great price, let us know how we can help.

    www.dashman.net or call

    608-637-7167

    Attached Files:

    Last edited: Mar 7, 2012
  2. earl schieb
    Joined:
    Jan 21, 2004
    Posts:
    2,931
    Location:
    MID-TN across from the cows

    earl schieb Member

    Dashman fixed me up! I like dealing with a professional. :cool:
  3. Terrible Tom
    Joined:
    Feb 15, 2010
    Posts:
    559
    Location:
    New Lisbon,Wisconsin

    Terrible Tom Member

    I also bought some parts from Dashman. Super guy and nice work! Thanks, Ben.
    Tom
  4. bobbyb
    Joined:
    Jun 28, 2009
    Posts:
    151
    Location:
    ohio

    bobbyb Member

    Just received some special 4 deg. angle carb. spacers from Dashman today. They look great, and very professionally done. He really helped me out on these special spacers and saved me a lot of grief getting them made locally. Great to work with !!
    Register now to get rid of these ads!

  5. hammeredt
    Joined:
    Mar 3, 2006
    Posts:
    187
    Location:
    MA

    hammeredt Member

    I bought some carb spacers with Dashman- they are beutifully made and he was great to deal with. I would definitely buy from him again.

    J-
  6. dullchrome
    Joined:
    Jan 15, 2009
    Posts:
    1,390
    Location:
    SoCal

    dullchrome Member

    I've purchased from Dashman on a couple separate occasions and he has more than delivered on each and every time. Definitely a class act ! ! !
  7. Shaina32Odom
    Joined:
    Jan 17, 2012
    Posts:
    1
    Location:
    michigan

    Shaina32Odom Member

    He really helped me out on these special spacers and saved me a lot of grief getting them made locally.

    Thanks,
    wristbands

  8. dashman
    Joined:
    Apr 15, 2009
    Posts:
    774
    Location:
    Viroqua WI

    dashman
    ALLIANCE MEMBER

    Just because someone told you "it can't be done" isn't always the case.

    Let us know what your custom needs are. This was done for a vintage Mopar project, it allows the Holley's to be run in line rather than turned sideways per customer's request.

    Feel free to give me a call at 608-637-7167

    Dashman's Hot Rod & Speed Parts

    www.dashman.net

    Attached Files:

  9. hupster
    Joined:
    Nov 24, 2007
    Posts:
    337
    Location:
    california

    hupster Member

    Just got some more from Ben ( Dashman). As usual great products, service, and price.
  10. dashman
    Joined:
    Apr 15, 2009
    Posts:
    774
    Location:
    Viroqua WI

    dashman
    ALLIANCE MEMBER

    Often we are asked about our 5 ear Torq Thrust aluminum block off center caps. We offer a huge selection of different styles for American Racing, Indy, Coy's, Show Wheels Streeter, Rev 100, Salt Flat....blah blah... You get the picture. We have thins and thicks with recess for the dust cap, or even the classic hole for the spindle. Give us a shout and we will do our best to help you. Here is a small sample of what we carry for center caps.

    Dashman's Hot Rod & Speed Parts

    www.dashman.net

    Attached Files:

  11. 49Flatty
    Joined:
    May 4, 2006
    Posts:
    258
    Location:
    Colorado Springs (Peyton)

    49Flatty Member

    I kept having a drip from my nozzle bars on Ford 94 carbs after shutdown. This would cause a flodded condition when it was time to start it up hot. Countless times of setting the float level, measuring everything, I finally realized my problem. The angle my carbs sat at was about 4 degrees. This made the carbs tip too far back and as the fuel heated up in the carbs, fuel would drip from the nozzle bar. I ordered some 4 degree wedge adapters from Dashman. The quality was excellent and they were spot on 4 degrees. Problem solved. Great price too and he even included the gaskets I needed. Thank you!

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.