Register now to get rid of these ads!

aluminum valve cover polishing

Discussion in 'The H.A.M.B. O'Dex' started by agtw31, Jul 22, 2011.

  1. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    SPECIAL PRICING ON FLATHEAD INTAKE POLISHING

    $175 PLUS RETURN SHIPPING COST



    i take paypal checks and money orders

    $85 diecast valve covers

    $125 sand cast valve covers

    $225 intake manifolds(tunnel rams add $100)

    return shipping is not included in my pricing

    i polish other parts contact me for pricing

    614-230-2451 or email me at valvecover@hotmail.com

    [​IMG]
     
    Last edited: Jul 9, 2015
  2. oz07
    Joined: Oct 16, 2008
    Posts: 17

    oz07
    Member
    from Ohio

    I've had him polish a few things for me and really good results. Hard to beat for the price and has really quick turn around.
     
  3. concealledweapon
    Joined: Apr 9, 2011
    Posts: 9

    concealledweapon
    Member

    andy polished my intake did a great job fast turnaround packaged well for shipping
     
  4. Doc.
    Joined: Jul 16, 2005
    Posts: 3,278

    Doc.
    ALLIANCE MEMBER

    Andy has done several parts for me and they look great. I'm very happy with his work and you will be too.
     
    Register now to get rid of these ads!

  5. dustdevil
    Joined: Mar 2, 2009
    Posts: 808

    dustdevil
    Member
    from illinois

    Andy polished my intake and valve covers, easy to deal with and great quality!!
     
  6. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]
     
    Last edited: Jul 9, 2015
  7. Wally
    Joined: Jul 5, 2009
    Posts: 249

    Wally
    Member
    from Iowa

    Those Weiand 409 valve covers turned out very nice.
    I wish everyone on the HAMB would have seen what they looked like
    before I sent them to Andy. They looked like they were ready for
    the scrap pile. They had been welded on, sanded down and beat up.
    Andy does great work! Thanks Andy!:D
     
  8. Got my intake (one in pic) back Friday I'm happy as a pig in shit. Great work thanks a million



     
  9. gkgeiger
    Joined: Nov 28, 2007
    Posts: 760

    gkgeiger
    Member

    I'm very pleased with the work Andy did on my intake manifold. He did it on time and as quoted.

    [​IMG]
     
  10. DH9185
    Joined: Mar 17, 2013
    Posts: 94

    DH9185
    Member

    I spent over 100 hours and wasted a lot of good swear words polishing my own TR, only to end up with an adequate result suitable for my "non-show" car. Never again. I highly recommend paying to get it done, and the pics of his work here look awesome.



    Posted using the Full Custom H.A.M.B. App!
     

    Attached Files:

  11. 32rustedinpiece
    Joined: Nov 24, 2005
    Posts: 339

    32rustedinpiece
    Member

    Here is some more evidence of his excellent polishing job on my 1500.00 eddie meyer intake. Thanks again!
     

    Attached Files:

  12. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    what you sent me is what you got back

    that isnt even an intake.it is a carb adapter with jacked up bolt holes

    i don't modify or damage parts,i polish them

    i also refuse to be blackmailed into giving a refund

    the end
     
    Last edited: Mar 17, 2014
  13. gkgeiger
    Joined: Nov 28, 2007
    Posts: 760

    gkgeiger
    Member

    What happened to Jeff is totally unacceptable. I had a similar result but not nearly as bad. My carb. mounting surfaces were distorted but repairable. I gave Andy some constructive criticism and thought he might have learned something. I gave Andy a good recommendation because I wanted to help someone make a living in the car business. I take back my recommendation.
     
  14. tjet
    Joined: Mar 16, 2009
    Posts: 1,253

    tjet
    Member
    1. Early Hemi Tech

    Been using Andy for years for valve covers & intakes...

    These came out really nice...

    [​IMG]
     
  15. real57vetteguy
    Joined: Jan 21, 2014
    Posts: 7

    real57vetteguy
    Member

    :(
     
    Last edited: Sep 1, 2014
  16. louisb
    Joined: Oct 13, 2008
    Posts: 274

    louisb
    ALLIANCE MEMBER

    Just got my Offy Super Dual back from him and was very happy. I will be sending him more work in the future.

    [​IMG]
    2014-02-03 20.04.04 by louisfbrooks, on Flickr

    --louis
     
  17. clcrown
    Joined: Oct 29, 2012
    Posts: 9

    clcrown
    Member

    Picked up the T Bird valve covers today that Andy polished for me ,he did a great job no complaints here Carl
     
  18. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]
     
    Last edited: Apr 27, 2014
  19. DaPeach
    Joined: Apr 22, 2009
    Posts: 167

    DaPeach
    Member
    from NE OH

    Andy did a great job on my M/Ts. Would definitely use him again.
     
  20. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

  21. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

  22. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]
     
    Last edited: Aug 21, 2014
  23. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]
     
    Last edited: Sep 25, 2014
  24. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

  25. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]


    [​IMG]

    [​IMG]
     
    Last edited: Dec 14, 2014
  26. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]

    [​IMG]
     
    Last edited: Jan 13, 2015
  27. Rhinelander 1
    Joined: Jan 27, 2015
    Posts: 1

    Rhinelander 1
    Member

    10386268_699053293549711_5593937373703210825_n.jpg
    Andy------Thank-you for a job well polished....You are a very polite fella with fast turn around....

    Brad Knoll Rhinelander Wi.
     
  28. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

  29. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

  30. agtw31
    Joined: Apr 27, 2009
    Posts: 334

    agtw31
    Member

    [​IMG]
     
    Last edited: Apr 30, 2015

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.