This is a complete 4 speed setup I was going to put in my '58 Oldsmobile but have decided to sell the car so it is available. It is a new flywheel, clutch plate, pressure plate, throwout bearing, custom pilot bearing (you don't need a drilled crank), all new bolts, Offy bellhousing, fork and Ford T-10 transmission. This was all setup and gone through and purchased from Bob Bendtsen at http://www.transmissionadapters.com/ up here in MN. We are heading to Florida in a few weeks and may be able to drop it off if you are not to far out of the way.