Have you considered using a zips riser to get the fan centered in the radiator,the fan is so low it's probably not going to do it's job. HRP
Dynomax Super Turbo mufflers with a Jegs 2 1/2" street rod exhaust kit. Wish the exhaust kit had a few more 45' bends in it, but all in all very happy with the kit. I'll add the tailpipes later.
Here's the video. http://vid752.photobucket.com/albums/xx167/ronr2/Video/32 ford startupwith ag2.mp4 Start up went fairly well. The brand new Mallory coil had a short so I ran down to the local parts store and bought an Accel coil and now had some spark. Next was no fuel. I failed to tighten the fuel line connections real tight when I installed them, and the pump was sucking air instead of fuel. After that it fired right up. Oil pressure at 55psi, water temp 190 F. Hope to take it for a ride after Thanksgiving , if the roads are dry.
Nice job, the only thing I could be critical of is the welds on the exhaust. It always looks nicer if they are ground smooth.
Ill need to work on those after I tear it down for paint. Right now I'm kind of pushing to get it ready for the DMV inspection so I can get a VIN and register it...