Good guy sounds like he needs helps!

[coolbreeze1340]

Just seen a news story about an older gentlemen in Long Beach, CA that rolls the highway in his personal car. The car looks to be an old ambulance and he stops and helps anyone in trouble on the roadside. When finished he gives the motorist a card and asks them to "pay it forward". I guess after the nes station filmed the original story someone cut the guy off and damaged the front of his old ride and he can't fix it. Should would be nice if one of you west coast guys could get us some more info on the guy. I am searching for more info on line and will post it if I come up with anything!

[LZ]

Wow no shit.
Thats to bad. Some of the nicest people give what they have even if it leaves them with nothing. God bless him.
Cant we notify the car show that rebuilds peoples rides on the sly. Whats the name of that. Chip Foose is on it.
Luke

[Rootie Kazoootie]

Originally Posted by coolbreeze1340

Just seen a news story about an older gentlemen in Long Beach, CA that rolls the highway in his personal car. The car looks to be an old ambulance and he stops and helps anyone in trouble on the roadside. When finished he gives the motorist a card and asks them to "pay it forward". I guess after the nes station filmed the original story someone cut the guy off and damaged the front of his old ride and he can't fix it. Should would be nice if one of you west coast guys could get us some more info on the guy. I am searching for more info on line and will post it if I come up with anything!

It was on the CBS evening news.
http://www.cbsnews.com/evening-news/...er;categoryNav

[Special Ed]

He's down the road apiece from Long Beach (about 125 miles south) in San Diego, actually. He's a good guy, for sure. Been doing this stuff for as long as I can remember (decades).

[Saxman]

Damn, that sucks. How damaged is it?

[tfeverfred]

Originally Posted by Saxman

Damn, that sucks. How damaged is it?

I saw that story. It looked to be a frontend hit. Looked fixable. The guy was pretty broken up about it too. It never fails that the folks doing good, get the shaft.

[unclescooby]

If someone ends up helping this guy, I'll make a small donation to help.

[cfnutcase]

I guess the guy that hit him didnt have insurance or what? Why didnt he have to pay to fix the guys car? I mean I am all for helping the guy but seems that the guy that caused the damage is the one that should be paying up here the most. Jim

[tfeverfred]

Originally Posted by cfnutcase

I guess the guy that hit him didnt have insurance or what? Why didnt he have to pay to fix the guys car? I mean I am all for helping the guy but seems that the guy that caused the damage is the one that should be paying up here the most. Jim

If I remember correctly, he was helping someone and it got hit. I THINK it was a hit and run. Maybe someone can clarify this.

[94hoghead]

Hope some one can repay all his kindness by helping him out.......

[jw johnston]

Grew up in san diego and this guy was always helping people! hope someone can help him out. Although it doesnt look to bad, wonder why he cant fix it?

[junk yard kid]

That dude lives down the road from me, i drive by his house and see the ambulance all the time. Never met him tho.

[sololobo]

J.Y. Kid, take the initative to stop and get some info that would allow us to be of some help to repay this kind soul for all his goodness. A lot of us can throw down a few bucks to get this project rolling. You obviously can scour junk yards for goodies and may know a shop that could aid in being the repair spot for this endevour. You know, dirty deeds done dirt cheap!! Challenge has been issued. Hope you can run with the ball and we can get this gent back in action. Best regards, ~sololobo~

[ME.GASSER]

Saw this story on the news lastnight. When he started to cry about the car i almost lost it. There just aren't people like him out there anymore. We would also be willing to make a donation. Please keep us informed.
Gasser Girl

[Old Roadster]

It was on the CBS evening news.
http://www.cbsnews.com/evening-news/...er;categoryNav

Donations to Weller's efforts can be made to:
San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

This address is in the article.

[GassersGarage]

He said the car was totaled but in the news, it didn't look that bad. Didn't he have insurance?

[dirt t]

Just a thought Anybody know how to contact Chip Foose at Overhauling?

[48 Poncho]

Very Sad. One of my buds moved here from Chicago. He belonged to a club back in the day and said that a lot of car clubs were getting bad raps. He said they made it a point to help people on the road and always left them with a card that said "you have been assisted by a member of _______________ car club". Thought that was great.

48 Poncho

[Special Ed]

This fellow is pretty low-key, and won't necessarily ask for anyone's help. He recently wore the engine out in that vehicle (I forget how many hundreds of thousands of miles it had on it), and a few people stepped up to get him a fresh block and got him back on the road. It was a Y-block, and took a little bit of doing. He is worth helping out....

[NMCarNut]

Has anybody in the San Diego area seen the car in person to see if it is really totaled? Unless the frame got tweaked or the engine shoved back into the firewall it looks like an easy fix. If there is not one closer, the yard I frequent here in New Mexico has at least one good front clip and I'm willing to help get one his way.

[Saxman]

Originally Posted by sololobo

J.Y. Kid, take the initative to stop and get some info that would allow us to be of some help to repay this kind soul for all his goodness. A lot of us can throw down a few bucks to get this project rolling. You obviously can scour junk yards for goodies and may know a shop that could aid in being the repair spot for this endevour. You know, dirty deeds done dirt cheap!! Challenge has been issued. Hope you can run with the ball and we can get this gent back in action. Best regards, ~sololobo~

Yes JYK, if that would be possible that would be awesome. I'd be in for a donation to help this guy. "You have been assisted by members of the HAMB" has a nice ring to it.

[magec mike]

Not the first time they did a story on Thomas Weller. He is really genuine. Sending some cash for his car fund. They say he helped over 5000 people, so if the car clubs got 5000 people to just donate 5 bucks he could repair anything. He does drive a classic!

[Saxman]

I think we need to get more details on exactly what the car needs and maybe we can make arrangements with some of our HAMB brethren for repair. Just thinking. It would be great to help somebody like this guy. he may need more help than just money.

[junk yard kid]

ill try to go by there tomarrow, my girlfriend has a party going on today and ive had too many beers to go down the road.

[Jdeshler]

keep us posted!! im willing to send a donation from bama..

[fbama73]

I'm too far to give labor, and I don't have any 50's Ford parts, but if we move on this, I'll be in for some cash.

[Jdeshler]

just got off the ground putting a plug in a ladies tire.. the satisfaction from giving and the look on that persons face when you say no charge has to be the greatest gift from god we have.. i hope this guy gets rollin soon and dosent get discouraged.. hot rodding is soooo much more than putting a car together and the good people on the hamb have proven it time and time and time again!! its nice to know there is still a group of people out there who still care.. "lifetime subscriber"

[Saxman]

Originally Posted by Jdeshler

just got off the ground putting a plug in a ladies tire.. the satisfaction from giving and the look on that persons face when you say no charge has to be the greatest gift from god we have.. i hope this guy gets rollin soon and dosent get discouraged.. hot rodding is soooo much more than putting a car together and the good people on the hamb have proven it time and time and time again!! its nice to know there is still a group of people out there who still care.. "lifetime subscriber"

Amen brother!

[LSR 2909]

I'm in for a small donation.

[deto]

When I roll up to a stranded citizen in my 52 they usually get a little stand off ish. After you get there car back on the road they usually change their tune. Keep the faith alive gentlemen.

[plymouth1952]

I am a poor guy but damn I am in for some cash

[Moose223]

O.K what do we need,get a close line on him and I'm in.

[pops29]

Come on San Diego show your hamb support. I am in northern ca. but what ever I can do, my shop is yours full force for whatever you need. cash, machining, fabrication, steel let me know

[Jdeshler]

Originally Posted by pops29

Come on San Diego show your hamb support. I am in northern ca. but what ever I can do, my shop is yours full force for whatever you need. cash, machining, fabrication, steel let me know

awesome.. jealous here, machinist trade with no lathe.. haha.. i hope this thread at least gets a million views..

[My07Bobber]

I'm in for some cash. I remember as a kid in the early 60's. My dad would pull over all the time and help people on the side of the road. I do it myself and have stopped many, many times.When they ask how much, I tell them "no charge" just help the next guy. Even if they make a cell phone call letting someone know that someone is broke down, that's paying it forward in my book............just sayin.....

HotRod

[Rattle Trap]

I have seen this guy in action. He has helped many over the years. Im going to donate to the cause. People like him make this world worth living in.

[Rickybop]

Originally Posted by pops29

Come on San Diego show your hamb support. I am in northern ca. but what ever I can do, my shop is yours full force for whatever you need. cash, machining, fabrication, steel let me know

This is heart-warming to say the least. Awesome, pops29.

If you guys get something concrete going, I'm good for a few $.

[Fuzzy Knight]

JYK
Where is he located??? I can help!!

[junk yard kid]

to easy to get it on google earth sorry. fuzzy knight pm sent.

[Rattle Trap]

Wow Im real close. Im between 1st and 2nd on the north side of the 8 fwy.

[jandlcars]

if i was back in CA i would supply my shop and wrecker
i am going to keep a watch on this
i am a poor roder but would make a donation

[Fuzzy Knight]

Went by and checked out the car today and all I could see was that the rear bumper is tweeked a bit and there is a dent in the left rear quarter just above the bumper. I can fix the dent. If any body knows him to make contact we can get this started.

[Jdeshler]

Originally Posted by Fuzzy Knight

Went by and checked out the car today and all I could see was that the rear bumper is tweeked a bit and there is a dent in the left rear quarter just above the bumper. I can fix the dent. If any body knows him to make contact we can get this started.

That's awesome how quick you got that checked out! Maybe they totaled it because it's just so old, and possibly the damage isn't too bad on it.. Keep us posted!
~bama~

[Saxman]

Shit! HAMBers rock! Can someone make contact with him and figure out what's needed and report back?

[117harv]

JYK, let us know after you talk to him, maybe we can send donations to you and you can deliver??? I can spare a few frog skins for repair and to keep him supplied for his acts of kindness.

[Rattle Trap]

What about the smashed front end of the car? In the video that is in post #4 the front end is smashed in.

[DanP.aka.Mongo]

First time posting but I want to help this guy. I have been trolling this forum for 1-2 years. I'm in Tustin Ca I will make the drive down and bring extra hands (as many as 3 total). I have done basic body work and know my way around a tool chest. Many hands make light work so if there is going to be an effort to rebuild I would like to be a part of helping a man who has help so many.

-Dan P

[117harv]

Great first post

[ME.GASSER]

Originally Posted by Fuzzy Knight

Went by and checked out the car today and all I could see was that the rear bumper is tweeked a bit and there is a dent in the left rear quarter just above the bumper. I can fix the dent. If any body knows him to make contact we can get this started.

Are you sure this is the same car??? The one on the news report had the front end smashed in.

[Fuzzy Knight]

The one parked outside on the street was the 56 Ford wagon. I don't know how many he has or what else is going on but the one on the street does not have any front end damage.

[Dave50]

watch the video you have got wrong car its in garage front end smashed

[imitefinishthis1]

Okay, so I am a consumate pessimist. But from the looks of it he rearended someone? Or someone crossed the line and hit him head on. He wasn't real clear. I would bet the frame is okay, and a decent front end would fix that car. There must be a few of them out there. Even off of a four door. Tell you what. If somone comes up with a nice nose I'll help the guy bolt it on. I live in so cal. This is a no brainer if the rails are close. If not run it to a body shop and pull em around untill the core support bolts drop in. But first I think we need a decent line on this guy. Make sure he wants help, and all that other stuff.

[fiddysixF]

Thats a good man that deserves some kindness in return. I'm in with cash if we can help him. Subscribing.

[slammed]

Send a pro over to estimate the actual car/damage.

[bali-rod]

hello all -Andy here from orange california.

need a couple of you San diego guys to take charge , knock on that door ,and fix that car.
This is an awesome chance to pull together and shine. Plus the guy drives a HAMB friendly wagon.
im in on a donation also once someone gets this rolling. i will even drive down to help out.

THANKS..MAKE US PROUD GUYS..

ak-bali-rod

[1oldtimer]

I'm about 80 miles or so away, but I'm up for a drive. Weekend help, a little funds, parts hunting or hauling?.

[bodi]

This one needs to live at the top of the page.

Hard to help from Washington, but, if anything is still being worked on in November, I'll be glad to wheel down that way, and give a hand wrenching, if any is needed.

There has to be a ton of talented guys down there that could whip this thing back in to shape pretty quickly.

[SlmLrd]

Im in the neighborhood, and down to help with whatever needs to be done. JYK, Fuzzyknight, let me know.

[TexasSpeed]

Talk about salt of the earth.. Hope there's a happy ending to this.

[bodi]

Maybe we could make this a STICKY, and try to round up some of those front end parts to get this thing repaired. I'm sure there are some folks nearby with Ford parts to spare.

Looks like the quickest repair would be a donor front end.

Anyone have any spares lying around they'd be willing to donate?

Then again, maybe that is was the car spotted out front of his house was for.

[Panel Pete]

Wish I were closer to lend a hand on putting the rescue rig back on the road. If one of the San Diego members get a solid line on the repairs needed put me down for some financial assistance.

Pete

[ffr1222k]

Is it me or does it look like the stainless side trim is '55? The headlight rings look like '55 too. The grill and parking lights and hood are '56.

Regardless, I am in for a donation if someone local can get something going.

[TrioxinKustoms]

Donations to Weller's efforts can be made to:
San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

from the article

[bali-rod]

Originally Posted by TrioxinKustoms

Donations to Weller's efforts can be made to:
San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

from the article

CORRECT-THIS INFO IS STATED IN PAGE 1 FOR MR.WELLER.

BUT ALSO.

I BELIEVE US HAMBERS ARE ALSO WILLING TO FUND THE PROJECT (LABOR,PARTS,SHOPTIME,BEER,SAN DIEGO BBQ-JUST HANDLE IT).
and whatever else needs to happen. thanks in advance.

[j.r. Nice]

Also found this. I'll be in - at the first of July. Really like to have more info on what happened, and what he wants to do....fizx the old one or get a new one. Right now the efforts seem a little random. I'm sorry I am so far away.

http://www.indiegogo.com/thomaswellercharity

[NMCarNut]

Is anyone local trying to organize this? Here is the deal if you can not find a front clip (nose) locally or for less money:
I talked with the manager of the yard in southern NM I frequent and gave him the story. He said he'd sell me a complete clip for $500 and let me pick it out from the ones he has. This would be inner/outer fenders, hood, grille, bumper, radiator support, and trim, plus radiator if he has one.

If this sounds like the way to go I'm willing to donate $50 towards purchase plus pick out and get the parts, and then deliver to Albuquerque where hopefully someone from the HAMB express could continue its trip west.

PS: I believe there are better cars to choose, this is the only pic I have in the yard with any 56s in it . . .

[King Karl]

I'm in for a few bucks if anyone gets a plan together.

[junk yard kid]

Dang you guys are on this. I saw the same thing as fuzzy knight and thought it was odd. I wasnt aware he had 2.

[NMCarNut]

Went back and looked again at the video, the side trim and headlight rings are definitely 55. Also, what is interesting is the car you get a glimpse of at the end of the video sure looks like a 56 Mercury. Is his back up car a Mercury?

Anyway, 55 and 56 fenders interchange, I might be able to get 55s (or 55 trim and rings) instead. Once someone verifies what he needs and I can be of help let me know.

Originally Posted by ffr1222k

Is it me or does it look like the stainless side trim is '55? The headlight rings look like '55 too. The grill and parking lights and hood are '56.

Regardless, I am in for a donation if someone local can get something going.

[dirt t]

Bump!

[TrioxinKustoms]

http://www.indiegogo.com/thomaswellercharity?c=home

someone set up a money fund already, we just need to get someone over to his house and see if he needs labor/parts.

[BadgeZ28]

I have lots of questions. Steve Hartman does these stories for the national news. I would think the guy would be swamped with offers of help by now? Someone set up a fund for the older lady on the bus who the kids were taunting. Last I heard, that was over $500K in a couple days. You would think an area car dealer or two would have come forward.

[408Fairmont]

Car guys dont get help like that, they are probably happy another old car is off the road...


I wish I could lend a hand, but I couldnt be any further away. Someone knock on the poor guys door and see what he has to say.

[Fuzzy Knight]

Went by today and knocked but no one answered. Left my name and number and the reason I stopped by. We will see if he contacts me for help!
I also left a message via Facebook !

[pops29]

Originally Posted by Fuzzy Knight

Went by today and knocked but no one answered. Left my name and number and the reason I stopped by. We will see if he contacts me for help!

Good Job !!! Keep checking

[TrioxinKustoms]

Originally Posted by Fuzzy Knight

Went by today and knocked but no one answered. Left my name and number and the reason I stopped by. We will see if he contacts me for help!

Awesome!

[Rickybop]

bump

[SanDiegoHighwayman]

hiya fellas,

thankee kindly!

only happened across this late t-nite - then went to front door and found note from Dave -- didn't see it when I got home from "playin on the freeway" as I come & go thru the garage usually - i'll give him a call tomorrow -- kinda wore out right now to stay up but, just so ya know - a fella from Kansas City has located and purchased a 56 front clip in Texas offa craigslist and is waiting for whereto ship it to for me -- liketa finda local shop that wishes to do this fixin - ain't gonna be easy as the engine tranny driveline was knocked back by the impact and the left exhaust manifold damaged - smashed the steering column and shifting mechanisms - don't appear the frame is bent in front but -------

more tomorrow bedtime for this old codger ---------

[bodi]

Sorry to hear about the damage, but, am stoked that you found us here on the H.A.M.B.

Sounds like you found the parts you need, and just need some help getting everything straightened out. I'm sure that the people in the area can help find a shop equipped to do so. Heck, some of them probably ARE a shop equipped to do so. I wish I were down there to help you. If you still need help come this fall, I'll certainly come through that way on my way to Phoenix for the winter.

Can't think of a better group in the world to have on your side than this group here. I'm sure we can all figure something out to help you get back on the road. I'll be watching for manifolds, and column parts around here.

Best wishes, and thanks for doing what you do!

[4t6ford]

Originally Posted by SanDiegoHighwayman

hiya fellas,

thankee kindly!

only happened across this late t-nite - then went to front door and found note from Dave -- didn't see it when I got home from "playin on the freeway" as I come & go thru the garage usually - i'll give him a call tomorrow -- kinda wore out right now to stay up but, just so ya know - a fella from Kansas City has located and purchased a 56 front clip in Texas offa craigslist and is waiting for whereto ship it to for me -- liketa finda local shop that wishes to do this fixin - ain't gonna be easy as the engine tranny driveline was knocked back by the impact and the left exhaust manifold damaged - smashed the steering column and shifting mechanisms - don't appear the frame is bent in front but -------

more tomorrow bedtime for this old codger ---------

Completely awesome that you found us here at the HAMB , you've just landed yourself in the middle of the best bunch of old car guys n gals in the world ( I'm writing this from New Zealand ) . You Sir have clearly been " paying it forward " for many years and now you're going to see this great bunch of folks return some of the good help and kindness you've been giving out . It will great for those of us so far away to be able watch the progress of the repair work right here too .

Rod .






.

[justnicholas]

Wow. This thread is truly awesome and inspiring.

[SanDiegoHighwayman]

Beulah, intered, since last year, here --






in better days

[ME.GASSER]

SanDiegoHighwayMan,
Welcome to the Hamb. Was so sorry to hear of the damage to your rescue car. Saw the story on the evening news. This site has some of the best people you could ever meet in your life. I'm sure there are enough people on here who are willing to help that your car will be fixed in no time. We are willing to do donations if you need them. Please just let us know. God Bless you for all you do.
Wanda
Aka Gasser Girl

[Dick Dake]

Beulah looks fixable. If you take the help from the guys here on the Hamb, you will be fine.

[Fuzzy Knight]

Best thing to do is pull all the sheet metal and find out what if any damages are done to the frame. Then pull the motor and tranny and check it all out so we get no surprizes later.
If he has tools we can do the work there.

[King Karl]

I'm sure that once we have a parts list you could have everything there to fix her within a few weeks at the latest.

Time to rally fellas!

[Hitchhiker]

I'd offer my shop space to do the work, but I'm afraid I'm a little far.

[Jdeshler]

That is awesome that you did find us on the hamb talkin about ya (talkin good of course). I see it was a pretty good hit and we are all sorry to see that.. With the help from the folks here you'll be able to take that RIP sign down and possibly put a born again one up!! Beautiful car by the way, standing by to help how I can from bama! I'll raise my next drink to the fella in kansas city! Or a wrench perhaps

[Fuzzy Knight]

He called this morning and I will stop by tomorrow evening after the cruise and check it out

[fiddysixF]

Originally Posted by Fuzzy Knight

He called this morning and I will stop by tomorrow evening after the cruise and check it out

Dave was it? Talk to this guy about a PayPal account. He can come on and give us the info on the account later. I dont make alot of money, but I want this gentleman to have some of it.

[RodStRace]

As a guy that has kept that beauty rollin for many years and helped others, I'd guess he's got a pretty good handle on what is needed.

- a fella from Kansas City has located and purchased a 56 front clip in Texas offa craigslist and is waiting for whereto ship it to for me -- liketa finda local shop that wishes to do this fixin - ain't gonna be easy as the engine tranny driveline was knocked back by the impact and the left exhaust manifold damaged - smashed the steering column and shifting mechanisms - don't appear the frame is bent in front but -------

He also mentioned that sheetmetal is picked out, just needs transport. Seems like he could use a hand on a couple things; a shop in the area that can accept the front clip and check the frame maybe do some pulling as needed, and a group effort to get the stuff swapped out and repaired as needed. Sure would be nice to give it a little White paint too.
I can kick in a few bucks to help, will send it to the address given.

Donations to Weller's efforts can be made to:
San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

[tfeverfred]

Originally Posted by SanDiegoHighwayman

hiya fellas,

thankee kindly!

only happened across this late t-nite - then went to front door and found note from Dave -- didn't see it when I got home from "playin on the freeway" as I come & go thru the garage usually - i'll give him a call tomorrow -- kinda wore out right now to stay up but, just so ya know - a fella from Kansas City has located and purchased a 56 front clip in Texas offa craigslist and is waiting for whereto ship it to for me -- liketa finda local shop that wishes to do this fixin - ain't gonna be easy as the engine tranny driveline was knocked back by the impact and the left exhaust manifold damaged - smashed the steering column and shifting mechanisms - don't appear the frame is bent in front but -------

more tomorrow bedtime for this old codger ---------

Glad you chimed in and it's great folks are coming through for ya. It's a great thing you're doing. Best wishes.

[Kansas City Marc]

Yeah I am the one from Kansas City that has the front clip for him to repair his fine ride!! I hope we can find a local body shop there in SanDiego to get er fixed. I hope someone can help us out. All I need is the address where to ship her to and its done. I am so happy to help this fine gentlemen or should I say gentle man. He deserves many fine blessings for his good deeds. If only more of us could be like him. You know what I mean?

[Fuzzy Knight]

KCM
Good on ya my man!!!

[Lone Star Mopar]

man thats good stuff right there...

[papastrk]

Kansas City Marc. That was great of you to provide the front end for this well deserving man. You have earned my respect!

[Kansas City Marc]

Thanks guys I just couldnt stand to see this good samaritan without his historical ride. It means so much to him and I dont think he feels complete without it. His story just really got to me and I just couldnt let it go without helping him. The Almighty,s blessings on all of you who pray for him and give for his cause.

[GEISTERFAHRER]

KCM you the man! I am down to send some cash his way, Good looking out Guys!

[Rickybop]

Ha! Two new members 'cause of this thread.
Welcome to SanDiegoHighwayman and and Kansas City Marc!

Thanks for starting the thread, coolbreeze1340. Good man. And FuzzyKnight...kudos for following up on this. Proud to be associated with good people like yourselves.

[mj40's]

[LOWBLAZERO1]

Originally Posted by Kansas City Marc

Thanks guys I just couldnt stand to see this good samaritan without his historical ride. It means so much to him and I dont think he feels complete without it. His story just really got to me and I just couldnt let it go without helping him. The Almighty,s blessings on all of you who pray for him and give for his cause.

if ya are going to any of the car shows here in kc, gimme a shout. ill buy ya a beer, or some food!

[RodStRace]

For SanDiegoHighwayman or anyone wanting to help him in the area

http://sandiego.craigslist.org/csd/cto/3091860596.html

[drjones96]

Originally Posted by Lone Star Mopar

man thats good stuff right there...

+1...bunch of great guys out there.

[TrioxinKustoms]

If the frame is bent (if the whole thing isn't bowed) would it be an easy subframe job? If anything some disc brakes would help stop him a little quicker.

Keep us posted!

[eugene vik]

on the frame be sure to check for rust out on front crosmember
should be fairly easy to spice if needed, just cut straight and fit carefully
sent him a little lunch money to eat and work

[junk yard kid]

Originally Posted by Kansas City Marc

Yeah I am the one from Kansas City that has the front clip for him to repair his fine ride!! I hope we can find a local body shop there in SanDiego to get er fixed. I hope someone can help us out. All I need is the address where to ship her to and its done. I am so happy to help this fine gentlemen or should I say gentle man. He deserves many fine blessings for his good deeds. If only more of us could be like him. You know what I mean?

I have a commercial address that you can ship to. I also live only a few blocks from Highway Man and can deliver it to him or a body shop. PM for the address,

[Kansas City Marc]

Might just take you up on that Junk yard. Thanks for offer for assistance we may need it. Ill let you know. I should know within a week. GOY (Good On Ya) lol

[von zipper]

Hello Chip? Overhaul him! He needs it

[King Karl]

Is there anyone in the are that has a shop where this thing can be torn down? Doesn't need to be a body shop but would help to have a frame machine.
Wish you were on this side, I would host the repair party at my house.

Once we find a shop, there will need to be time donated by some of you West Coasters to make the necessary repairs.
I'm willing to throw some money or a part or two your way to get it going as well.

I think Chip has the resources but if we work together we could probably do a hell of a job getting this man back up and running.

God bless ya Highwayman

[Fuzzy Knight]

UPDATE!!!
Went and stopped by this morning and talked to Mr. Thomas Weller, Real nice guy, Looked over the car and here is what I found.
1. Body is a 55 Front clip is a 56.
2. Needs a whole front clip including front core support.
3. Needs New radiator
4. Needs Power steering bracket
5. Needs new fan
6. Could need steering column
7. Could need Transmission.
Front frame looks good as the accident missed the frame horns. The motor is pushed back and all motormounts are broken.
Now for the semi bad part - It has tons of extra wiring to contol all the lights and accesories that Mr. Weller has on the car. This will be a challenge as some of it is very old and some not so old.
I am willing to donate my time to help fix this BUT!!!! we will need others to step up and donate time as well as a place to do this.
Mr. Weller is very very hesitent to open a Pay Pal account that is connected to his bank account. He has heard many horror stories about accounts being emptied. My suggestion is if you want to help $$ wise just send him a check via the posted address.
OK Boys it is time to put up or shut up !!!

[Pic]

^^Please keep posting these updates ^^. Hopefully this is going to all come together soon. Can't wait to see pictures of this car back on the road!

[Rickybop]

[QUOTE=Fuzemptied....OK Boys it is time to put up or shut up !!![/QUOTE]

Way ta go, Fuzzy. You heard him, fellas. Fuzzy is gonna need help. He can't do it all himself. The more the merrier. You guys nearby do the work, the rest of us will send $ to the address posted. Let's follow thru.

Good luck to you guys out there. Have fun.

Should we maybe contact the news agency that did the original story, and fill them in on our intentions?
Or maybe avoid the fanfare...

[von zipper]

Keep it going!!!

[King Karl]

What engine is in this thing? And I assume that it will need a shroud too, right?

[Fuzzy Knight]

Engine is a 292 and it did not have a shroud on it now.

[Atwater Mike]

Fuzzy:

Is it a stick or Fordomatic?

[dirt t]

Where do we "put up"
Terry

[drjones96]

Originally Posted by dirt t

Where do we "put up"
Terry

San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

[rustyfords]

Man I wish I was closer....I'd be turning wrenches for sure...but CA is too far for me to offer anything except cash.

I'll be sending some as soon as it gets firmed up as to where to send it.

Another way to attack this might be to list the parts needed and have people sponsor a part.

[drjones96]

Originally Posted by rustyfords

Man I wish I was closer....I'd be turning wrenches for sure...but CA is too far for me to offer anything except cash.

I'll be sending some as soon as it gets firmed up as to where to send it.

Another way to attack this might be to list the parts needed and have people sponsor a part.

San Diego Highwayman
Goose Creek Ranch, 504 Macon St.
El Cajon, Ca. 92019

[s55mercury66]

^^^Help the man and his car, people^^^

[the-stig]

If his car is an automatic and needs a steering column, I've got one in my garage from a 56 Fairlane I can drive down to him.
If he needs it someone send me a pm please.

[Fuzzy Knight]

Stig I will call and find out and post it

[Rickybop]

bump

[Stukka]

I was just on Google Earth seeing how far it was from my house and look what I found parked in the street. (see pic)
I'm 80 miles north but can volunteer for wrenching. I need the karma. Have a 7'3" wide box truck if we need to pick up the front clip at a shipping depot. Have a paint booth if you need to spray fenders & hood. Keep posting updates and I'll watch the thread.

[Kansas City Marc]

You guys rock and roll. It is so good to see you guys making this great effort to help Thomas. Anyway the 56 is ready and whenever you guys are ready just let me know where you want me to ship it to and Ill get er on the way. By the way here is a pic of the babe ready to be shipped.

[Rickybop]

You rock, Marc! And the donor parts look really good.

[nickk]

This is just amazing to see some complete strangers but with the same love for old cars come together to help another guy like this. I'm on the wrong side of the world to help work on it but, I'll send some cash his way. Just gonna have to make some 1st! Keep us updated!

[hotrod 32 ford]

Im in for a donation

[King Karl]

Originally Posted by Kansas City Marc

You guys rock and roll. It is so good to see you guys making this great effort to help Thomas. Anyway the 56 is ready and whenever you guys are ready just let me know where you want me to ship it to and Ill get er on the way. By the way here is a pic of the babe ready to be shipped.

Wow! What a donation. Is the whole car going or just the front clip?
From the stance it looks to have a motor and all.
I've sourced a fan out in CA and working on the power steering bracket. Let us know what the donor car has that will not be needed and we'll work around that.

KK

[Fuzzy Knight]

To answer the tranny question. He has a spare tranny in case we need one so we don't have to round one up.

[coolbreeze1340]

Man I love this site and the people that hang out here. I was out of the loop for a while and you guys took the original post and ran with it! Thanks to Fuzzy Knight, Kanas City Marc, and everyone else that jumped in to help. I'm glad the highway man joined and I'll get some money heading his way! Thanks again to all the guys that were able to help!!!!!

[SanDiegoHighwayman]

Originally Posted by eugene vik

on the frame be sure to check for rust out on front crosmember
should be fairly easy to spice if needed, just cut straight and fit carefully
sent him a little lunch money to eat and work

thankee Eugene came in t-day's mail GOOD onya!

Shela says WUFF

[Fuzzy Knight]

OK BIG News!!!!
I got my friend, Rick Hansen, Who owns Jack Williams auto body to agree to let me put Thomas's car and the donor car there and work on it. He also agreed to Straighten out the rear frame of the wagon from a previous accident.
All of this is for "Thats OK"

[coolbreeze1340]

Great news, Fuzzy Knight! It will be great to hear the highwayman is out on the road again in his vintage iron helping others! I might have to take a ride to Cali and catch a flat just so I can meet the guy!

[kendall66]

i have poked around here on the hamb for about a year now, asked some questions and always got good advise, and now i read this........ a bunch of guys and gals helping out a great guy.......brings tears to my eyes. i am too far away to help and would love to........i tip my hat to all you great guys and gals hear on the hamb......god bless you all.........keep me posted, ......some pics of the rebuild would be awsom.......

[Kansas City Marc]

You da man Fuzzy, You da man. Thats great. Just PM me and let me know the contact info and shipping address and when they are ready for the car and Ill get er goin. GOOOOD JOB GUYS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cant wait to see Thomas up and going again. WOW Incredible!!!!!!!

P.S.
King Karl I talked to Thomas just a few minutes ago and he said if you guys need any of the parts that are left over on the car you are more than welcome to use them and distribute them as you see fit. We will leave that up to you guys. I can tell you that it does have the rare 312 motor and tranny is included. It is a complete mechanical car.

[55 dude]

Bump!

[Rickybop]

Ta heck with Thomas...I want that donor car!

LOL...God's blessings, Thomas.

[rustyfords]

You guys are awesome. I wish I could get dirty on the rebuild.

[EnragedHawk]

This is one of the greatest threads on the HAMB I have ever read. Awesome work guys!

[von zipper]

Bump

[Saxman]

This is fantastic!! Way to go HAMBers!

[cfnutcase]

Well I am too far away to help and dont have much money but I will toss $20 in the mail for some beer money or coffee or soda......whatever yall drink! Its not much but its all I can do right now guys. That and a prayer for safe passage of all involved, God Bless each and every one of ya! Jim

[jandlcars]

i wish i was still in Ca to help

[roddin-shack]

KCM, Are you sure you just came aboard the HAMB, In any case I WELCOME YOU. Larry

[Kansas City Marc]

Yes sir. I had never heard of this site until Highwayman told me about it, and that you guys were going to help him out. Thanks for the welcoming me.

[117harv]

KCM, welcome aboard...and thanks for your help

[Ramblur]

Donation sent,and a bump.

[xhotrodder]

Originally Posted by dirt t

Just a thought Anybody know how to contact Chip Foose at Overhauling?

I thought that show went off the air!

[LabRat]

Heartwarming stuff , Well Done HAMBers ...

[damagedduck]

ALL can offer is a BIG THANK YOU!to all that jumped in & helped,
subscribed!!!

[No_Respect]

I really don't have the time to drive the 80+ miles to help on the rebuild but I will be heading down with the misses for 4th of July and if any parts need to be delivered at that time from the LA area i would be more than happy to bring them down.

[RayJarvis]

im in for gas money if theres a pony up area . good job gettin it together so far

[Fuzzy Knight]

KCMarc has ponied up a whole car for this rebuild. At this time I am not sure what extra pieces we will need until we tear it apart. Once we get the donor car and evaluate it there will be a short lull as I will be out of town. Thomas will continue to work on his ride by undoing wires, relays etc and marking them all for reassembly. Upon my return we go at this in earnest and post updates as well as photos.
All of you wishing to donate funds please keep it coming as we have no real idea what is going tobe needed until we get her apart.
Thank all of you who are helping as Thomas is the salt of the earth.
Fuzzy

[big creep]

fuzzy knight does he need a new wiring harness? i have one 21 circuit, and its yours if you need it! its brand new and im willing to donate it if needed. please let me know.

[Fuzzy Knight]

BC I will let you know as soon as I find out.
Thanks for the offer

[King Karl]

Originally Posted by Kansas City Marc

You da man Fuzzy, You da man. Thats great. Just PM me and let me know the contact info and shipping address and when they are ready for the car and Ill get er goin. GOOOOD JOB GUYS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cant wait to see Thomas up and going again. WOW Incredible!!!!!!!

P.S.
King Karl I talked to Thomas just a few minutes ago and he said if you guys need any of the parts that are left over on the car you are more than welcome to use them and distribute them as you see fit. We will leave that up to you guys. I can tell you that it does have the rare 312 motor and tranny is included. It is a complete mechanical car.

Man, you guys are top notch!
I wish that I was able to be out there and help Fuzzy with the work. The only thing I'll be able to do for the build from NC is send money and locate parts for you if needed.
If you guys want to sell the leftovers that Fuzzy and his crew don't want from the donor I'll gladly run them through for free on PRE73AUTO. (What doesn't sell here on the HAMB that is..)
Maybe we can get some tire plug money together for the highwayman after it's all said and done.
Again, all of you involved are great people and I hope the very best for all of you.

[roddin-shack]

Originally Posted by Fuzzy Knight

KCMarc has ponied up a whole car for this rebuild. At this time I am not sure what extra pieces we will need until we tear it apart. Once we get the donor car and evaluate it there will be a short lull as I will be out of town. Thomas will continue to work on his ride by undoing wires, relays etc and marking them all for reassembly. Upon my return we go at this in earnest and post updates as well as photos.
All of you wishing to donate funds please keep it coming as we have no real idea what is going tobe needed until we get her apart.
Thank all of you who are helping as Thomas is the salt of the earth.
Fuzzy

I know KCM has never mentioned his cost, in the donor car but may be a little extra cash should be funneled his way. It could not have been super cheap, and I dont think it was just laying around, just thinking about his fantastic gift to this wonderful cause. Larry

[1oldtimer]

Just remember to post up with the labor times if needed.

[honeyman]

Had some "free" help gettin' into a locked truck while driving home from Fla. yesterday...1st trip in my recently deceased mom's vehicle...$50 on the way, will do more soon. You guys helping out freakin' ROCK!!!

[Kansas City Marc]

Roddin Shack I appreciate your concern for me, but please dont worry about cash being returned to me. If you want to donate to Highwayman from the sale of the donor car parts, that is what I would want. That is where I would prefer any extra money to flow to. I love to support his efforts to help others. Thanks for all your help and concern HAMBers.

[Fuzzy Knight]

bump

[mschiffel]

I saw this on the CBS evening news a couple of weeks ago....This guy has a 56 Ford station wagon that needs a new front sheetmetal clip...it's kinda smashed...The engine looks to be OK...Maybe someone has a junk 56 Ford somewhere in Calif. to help him out ???

[von zipper]

Bump

[roddin-shack]

Another BUMP, For this great cause!!!!!!!!

[coolbreeze1340]

bump again!

[davidbistolas]

Originally Posted by mschiffel

I saw this on the CBS evening news a couple of weeks ago....This guy has a 56 Ford station wagon that needs a new front sheetmetal clip...it's kinda smashed...The engine looks to be OK...Maybe someone has a junk 56 Ford somewhere in Calif. to help him out ???

Someone needs to read through the whole thread hmm?

This effort heartwarming. I wish I could pitch in and help. /tips hat

[Jdeshler]

Originally Posted by davidbistolas

Someone needs to read through the whole thread hmm?

This effort heartwarming. I wish I could pitch in and help. /tips hat

Ha.. Seen it time and time again, foot in mouth! I'm sendin a little jingle to the adress this afternoon! God speed and good luck!! This is truly a show of the good ones left out there!!

[Stevie G]

Maybe Piero (sp), aka EVEL, could show up with his camera and add this to the next Mad Fabricators.

[Stevie G]

Originally Posted by Kansas City Marc

You da man Fuzzy, You da man. Thats great. Just PM me and let me know the contact info and shipping address and when they are ready for the car and Ill get er goin. GOOOOD JOB GUYS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cant wait to see Thomas up and going again. WOW Incredible!!!!!!!

P.S.
King Karl I talked to Thomas just a few minutes ago and he said if you guys need any of the parts that are left over on the car you are more than welcome to use them and distribute them as you see fit. We will leave that up to you guys. I can tell you that it does have the rare 312 motor and tranny is included. It is a complete mechanical car.

Kansas City Marc for President.

[Big T]

What a great story. The world needs more 'Thomas Weller's'.

[Gromit]

So this has to be the coolest thread I have seen on ANY board. so sorry it took so long for me to open it. WHat a great "warm fuzzy" to start the day on.

I'm pretty broke, but while cleaning up my Mom's place (she passed a while back) I found some U.S. money. Maybe i can scrape a few bucks together to help out a good person.
Cheers!

[Gromit]

Just a thought... especially if you happen to be local to this guy (or almost local) I bet the CBS affiliate would like to know about the efforts here. It makes a fascinating follow-up to a story they broke. a feelgood kicker as we call it. Probably worth contacting them. It might get even more help pouring in, and possibly some free exposure for businesses helping out.

Please consider it

[Gromit]

emailed CBS... but a local followup might help the cause.

[Jdeshler]

I thought something along the same lines gromit.. It would be good to see something GOOD in the news every now and then

[Terry O]

I just submitted Mr. Weller for Overhauling. There's a simple form on Chip Foose's website

http://www.overhaulin.tv/

if anyone else wants to do the same.
Irregardless, a little donation is in order for this knight of the road.

Terry

[Fuzzy Knight]

bump

[Mike Miller]

Checks in the mail.

[Fuzzy Knight]

I also put him in for OverHaulin

[von zipper]

Bump him up!!!

[jandlcars]

Bump

[Gromit]

I contacted CBS on Friday

They responded over the weekend.
It sounds like they are following, but i get the impressionthis guy may not come forward with all the information due to his humility. Let's keep this story fresh untll the paint is drying on his car.

Here is their response.

Thanks for writing.
Yes- we have been in touch with Tom and he is keeping us posted on how everything is going. We'll see where this goes and will consider doing an additional follow-up.

Many thanks,
Miles Doran
CBS News

[Mike Miller]

Bump.

[Fuzzy Knight]

Gromit
Thats cool.

[Fuzzy Knight]

bump

[von zipper]

Bump

[volvobrynk]

any updates?
I would really like to give an hand, but I'm half way around the world!

[Fuzzy Knight]

Right now we are waiting for the donor car to arrive. Thomas is working on unhooking all the wires and relays in the front so we can change over the front sheet metal and core support

[SanDiegoHighwayman]

Originally Posted by Mike Miller

Checks in the mail.

thank you Mike! got it yisterday --

[SanDiegoHighwayman]

Shela wants her "ride" back --


https://www.facebook.com/pages/San-D...=wall&filter=2

some updatin here -- THANKEE everyone! preciate yer support

[Rickybop]

Originally Posted by SanDiegoHighwayman

...Shela wants her "ride" back...

Awwwww...lol. Workin' on it, Shela.

Originally Posted by Gromit

emailed CBS... but a local followup might help the cause.

I did too...but they didn't reply back, so I'm glad a couple of you guys contacted them as well.

[383deuce]

This is the BEST story and DEED I think I have ever read here on the HAMB...What a great bunch of guys going out of there way to help this cool dude that helps others.

[big creep]

my offer still stands.

[rustyfords]

Lets hope it doesn't end up on Overhaulin unless they promise not to slam it to the ground, make it look like a 2003 Taurus and put 20" rims on it.

[hotskins]

Originally Posted by rustyfords

Lets hope it doesn't end up on Overhaulin unless they promise not to slam it to the ground, make it look like a 2003 Taurus and put 20" rims on it.

I agree, I think the talent that we have here will far exceed what Chip can do on his show. Chip is an awesome car builder/designer, but we have more heart and soul. I wish I was still stationed in San Diego so I could help out. I have been broke down onb the side of the road and recieved help from a total stranger, I offered some money, he said but asked for a ride. I got him home, and with his help I was able to get home. We need more people like this. I too have stopped and offered help, some offered money, most offered thanks, the thanks was all the payment I was looking for. I'm glad that so many are working to get this guy back on the road.

[big creep]

that show was canceled right? my buddy used to work on it. i didnt know they picked it up again?

Originally Posted by rustyfords

Lets hope it doesn't end up on Overhaulin unless they promise not to slam it to the ground, make it look like a 2003 Taurus and put 20" rims on it.

[Kansas City Marc]

Haaving a real hard time finding a truck from Texas to ElCajon. I think it will be a couple of more weeks before it will get to you fuzzy. Ill keep you posted.

[OneFineComet]

Wish i was closer to help out. But this has to be one of the best threads i have come across on the HAMB. Ill be keeping an eye on this one.

[jandlcars]

bump

[the-stig]

Anything new?

[JunkYardFrog]

Originally Posted by 383deuce

This is the BEST story and DEED I think I have ever read here on the HAMB...What a great bunch of guys going out of there way to help this cool dude that helps others.

I agree. Very inspirational.

Good job everyone!

[JunkYardFrog]

Originally Posted by Kansas City Marc

Haaving a real hard time finding a truck from Texas to ElCajon. I think it will be a couple of more weeks before it will get to you fuzzy. Ill keep you posted.

Hi KCM,

I've got a friend in OK with a flatbed who sometimes makes the run to CA.

What kind of prices are you being quoted?

[JunkYardFrog]

Originally Posted by SanDiegoHighwayman

hiya fellas,

thankee kindly!

only happened across this late t-nite - then went to front door and found note from Dave -- didn't see it when I got home from "playin on the freeway" as I come & go thru the garage usually - i'll give him a call tomorrow -- kinda wore out right now to stay up but, just so ya know - a fella from Kansas City has located and purchased a 56 front clip in Texas offa craigslist and is waiting for whereto ship it to for me -- liketa finda local shop that wishes to do this fixin - ain't gonna be easy as the engine tranny driveline was knocked back by the impact and the left exhaust manifold damaged - smashed the steering column and shifting mechanisms - don't appear the frame is bent in front but -------

more tomorrow bedtime for this old codger ---------

God bless you, sir, for all your kind deeds.

[hotrodderhaag]

guys,
this is truely a one of a kind story right here... i live in north wester pennsylvania and i would be in my truck, with my tools and body work supplies, on the road to help that man tomorrow if thats what it came down to...... its not every day you see someone willing to risk there life for a family with a flat tire, or a elderly woman thats overheating..... the highway is a dangerous place, you never know what your dealing with and even more scary is WHO your dealing with... this man helps anyone and every one, not just whites, not just women. EVERYONE... I deep down in side feel this is how all humans should be.. expecially us car guys..... car guys to me are a different breed.... its someone who values that old piece of metal in the garage, not just saying its uncomfortable and unreliable....... this story should be all over the news and all over car shows on television... this is truely an inspirational story that brings tears to my eyes just telling all my friends about what all was talked about in the news clip and most importantly what you gentleman did to help this guy out....... my hats off to the fella who donated the car.... thats huge and unheard of.. and also to the guy who is helping do all work... you two are a perfect example how ths u.s.a should be and should work... every one on here willing to help and donate should def pat them selves on the back.! great work guys!

[JunkYardFrog]

Originally Posted by Kansas City Marc

You guys rock and roll. It is so good to see you guys making this great effort to help Thomas. Anyway the 56 is ready and whenever you guys are ready just let me know where you want me to ship it to and Ill get er on the way. By the way here is a pic of the babe ready to be shipped.

KCM,

Where is this car now? You mentioned shipping from TX. What city?

[JunkYardFrog]

Originally Posted by Fuzzy Knight

UPDATE!!!
Went and stopped by this morning and talked to Mr. Thomas Weller, Real nice guy, Looked over the car and here is what I found.
1. Body is a 55 Front clip is a 56.
2. Needs a whole front clip including front core support.
3. Needs New radiator
4. Needs Power steering bracket
5. Needs new fan
6. Could need steering column
7. Could need Transmission.
Front frame looks good as the accident missed the frame horns. The motor is pushed back and all motormounts are broken.
Now for the semi bad part - It has tons of extra wiring to contol all the lights and accesories that Mr. Weller has on the car. This will be a challenge as some of it is very old and some not so old.
I am willing to donate my time to help fix this BUT!!!! we will need others to step up and donate time as well as a place to do this.
Mr. Weller is very very hesitent to open a Pay Pal account that is connected to his bank account. He has heard many horror stories about accounts being emptied. My suggestion is if you want to help $$ wise just send him a check via the posted address.
OK Boys it is time to put up or shut up !!!

Test. My computer, or this board, is suddenly acting very strange.

[hotrodderhaag]

I would love to see some pictures of what's going on.... An amazing documented story really needs some visual effects to. What can we do guys

[roddin-shack]

KCM What is the latest status on the donor car??? Is it there yet??? Larry

[JunkYardFrog]

Waiting....

[SanDiegoHighwayman]

"intered" here for nearly a year now since bein kilt August 10th last year --




This mornin, July 10th, I'd gotten enuf of the destroyed front end out of the way to clear the engine enuf to light it off for the first time since the day Beulah got kilt -- nearta a year ago -- lower PS pulley on the engine smashed and the fan, waterpump and power stng pumps destroyed -- BUT -- after havin set fer nearly a year -- pumped the gas pedal 3 times [ normal ] turned the key -- -engine fired right off and ran --

*BUT* only fer about 60 seconds as I had to turn it off due to the GEYSER of engin oil sprayin all over the driver's side of the engine compartment!

Oil pressure switch block damaged by the engine - tranny being knocked outta their mounts on impact -- HUGE mess to clean up this mornin

after -- I went out and "played" some -- got my spirits raised by helpin several folk -- last one bein a motorcycle I passed as it was slowin on the shoulder of the NB I-5 almost to the 52 interchange -- couldn't tell initally if he was havin a problem or? -- so I pulled to the shoulder round a curve and waited a mite -- when he didn't appear, I commenced to back down the shoulder w my arrow & strobes lit till I come up on him workin on the bike -- he'd run outta gas on the main tank and hadn't been able to git the reserve switched on before it lost power and died -- add that his battery was dead as well, and he had himself a predicament cause he couldn't kick start it w no juice -- where I came in w my booster pac got him under way and he were'nt late fer school @







July 23rd
Have discovered that frame *is* damaged -- bent, buckled, & torn -- probably why steering is so difficult -- can't turn by gripping the drums, turns w effort w the steerin wheel - right depressin -- gonna go out & "play" some to git my thoughts offa this --

some stories here bout how I do this -- git my mind offa things depressin that is --
http://snowchains.tripod.com/sandieg...ogonlinediary/

[JunkYardFrog]

Good to see the work has begun!

What's the status on parts?

[JunkYardFrog]

Originally Posted by Fuzzy Knight

Right now we are waiting for the donor car to arrive. Thomas is working on unhooking all the wires and relays in the front so we can change over the front sheet metal and core support

Thank you very much for helping. What do you still need for parts?

[big creep]

i still have that wiring kit if its needed? its a 21 circuit kit! let me know?

[SanDiegoHighwayman]

real preciative of yer offer big creep haveta let ya know thankee if it was an ordanairy car that'd be right helpfull

the-stig -- might need that steering column thanks, I'll let ya know when I know

JunkYardFrog -- fuzzy knight had said he was gonna be unavailable fer some weeks -- I'm guessin he's vacationin -- likely we'll hear from him when he's back

had a coupla adventures tday "On The Road" onea them involved an idiot - moron - impaired? I don't know what? driver that tailgated me as I was "lit up" and manuverin in the fast lane to git stopped in the CD WB I-8 JEO College, where a female motorist was in distress and a MC CHP officer had stopped to help -- Officer SAW the whole episode happen as he was watchin the oncomin traffic and recognized me acomin in -- wrote the tailgater's licence down as he passed, as his bike was on the other side of the jersy wall facin EB -- be nice ta hear that the officer was able to "read from the book" to the ?? driver!

had 2 OHs [ overheats ] & 2 FTs [ Flat Tires ] as well - all in all a real nice day helpin folks

how Beulah looked afore gittin kilt --
http://www.coronadoclarion.net/premi...e-highway-man/

how my "backup" rig looks now --
http://www.youtube.com/watch?v=myuIEOMDl_U

[tfeverfred]

Good on ya and thanks for what you're doing.

[JunkYardFrog]

Originally Posted by SanDiegoHighwayman

real preciative of yer offer big creep haveta let ya know thankee if it was an ordanairy car that'd be right helpfull

JunkYardFrog -- fuzzy knight had said he was gonna be unavailable fer some weeks -- I'm guessin he's vacationin -- likely we'll hear from him when he's back

had a coupla adventures tday "On The Road" onea them involved an idiot - moron - impaired? I don't know what? driver that tailgated me as I was "lit up" and manuverin in the fast lane to git stopped in the CD WB I-8 JEO College, where a female motorist was in distress and a MC CHP officer had stopped to help -- Officer SAW the whole episode happen as he was watchin the oncomin traffic and recognized me acomin in -- wrote the tailgater's licence down as he passed, as his bike was on the other side of the jersy wall facin EB -- be nice ta hear that the officer was able to "read from the book" to the ?? driver!

had 2 OHs [ overheats ] & 2 FTs [ Flat Tires ] as well - all in all a real nice day helpin folks

how Beulah looked afore gittin kilt --
http://www.coronadoclarion.net/premi...e-highway-man/

how my "backup" rig looks now --