<<<<< Friday Art Show 1 /20/12 >>>>>

[57 Corvette ~ Bob]

[fortypickup]

Cool Bob...

[sololobo]

Nice start Bob, coupe is bad ass! ~sololobo~

[GaryC.]

A new Hot Wheels car? A hot rod Ferrari?
You make the call...

[chaddilac]

Did this for another hamber.... The "Well Driller" going on a 64 chevrolet drag car.

[ToddJ]

I know, this car is a tad off topic, but i had such fun drawing it and wanted to share it with you guys...it was a commissioned piece I completed this week.

[fortypickup]

I Love Hot Rods...

[fortypickup]

Nice work Todd!

[ToddJ]

Thanks Neal! Love the roadsters, man!

[MikeRogers]

Nice early start to the stuff this week - Cool stuff Bob, Tod & Fortypickup!

Having a bit of fun with a Henry J Gasser in Photoshop:

1951 Henry J - Altered Mini Hot Rod by Mike Rogers 303, on Flickr

[Spoggie]

I've secured a future for my old Holden. I'm gonna do ("fix') it up, with assistance & workspace provided by my stepfather, Neil. He built the little screamer engine in this car in 1980. Look at the redback spider nest in the extractors (headers). Rat poo on the rear air cleaner too.

Super mild custom, low buck. Nosed hood. That's it for the front, maybe hood louvers.

Ideas for the back end (compared with stock- 2" reset springs, Stabiliser bar, maybe tramp rods.
Middle pic shows planned VW fuel door.

I know this is hardly art.

http://forums.fxfjholden.com/index.php

[Jigger]

Spoggie is back! Get a 'hold on' that 'Holden'.

Bob, nice work, killer angle.

Gary, both... and very cool stuff.

Chad that is beautiful work

Todd the Chevy kicks butt and is way more topic then some of the stuff I've posted...

Neal, love the thumbnail but that color work is , well, drop jaw, gorgeous,man!
Some of your finest work!

Here's a series of sketches I've whipped out of the recesses of my dusty brain to consider for the 14th HAMB art challenge... the contender will be colored.

"Blue Coupe" Clark's 'T', flyin' high...




"All Washed Up"



"Dreamer"

[Zapato]

Jigger- you outdid yourself with Dreamer

[johnnyjalopy]

kool start guys!,,i never make the first page..yes!..I hope
two new pieces..hope you dig them..johnny

[johnnyjalopy]

great work BoB!
gary killer!
Todd...wow...the grill is so detailed
forty..kool stuff man!
mark dig the doodles
kool piece kaddilac

johnny!

[57 Corvette ~ Bob]

Dig your roadster Neal .......

Jigger, Dreamer is a classic, nice work.

Johnny, very cool work as always ........

Todd, nothing can be off topic about a '57 .......

Gary, classic work.....you never seem to fail.

Mike, I think you're having too much fun with your Photoshop ....very creative work.

[BOMONSTER]

'38 Willys scratchboard I did for a nice guy who wanted to do something nice for his pop. Jigger, I love all your stories this week. Johnny Jalopy: Really like the coupe. And on and on...

[Buick59]

Been hiding for what seems like a few months. Working on a Lowrider coffee table art book. A couple of images from some recent shoots.

[Pure Hell]

Man all such cool stuff you guys.. Real work won out again....

Sooo...more fun on my I-phone....

[Russian]

my first contribution to FAS

[fastkeen]

Everyone that post your art in here, your talent is unreal! Gives me inspiration to get back to drawing.

Jigger "Dreamer" is cool!

[Fool Injection]

My second ever entry for the FAS. A pic I messed around with.

[ME.GASSER]

Originally Posted by BOMONSTER

'38 Willys scratchboard I did for a nice guy who wanted to do something nice for his pop. Jigger, I love all your stories this week. Johnny Jalopy: Really like the coupe. And on and on...

Love this Bomonster. That's my favorite nose.

[bonez]

Originally Posted by Buick59

Been hiding for what seems like a few months. Working on a Lowrider coffee table art book. A couple of images from some recent shoots.

This bike is uber nice. simple and nice just how i like it.
The picture quality is of course supreme. i need to build me a lowrider bike, its been long, and i have a frame just like that one that i wanted to fill just like that one and ........

[Britt8M]

Road Kill !



If you would like a poster if this image, send me an email to:
britt.madding@gmail.com

[Tommy's Cycle]

A few "Knifed Up" real pistons this week. I'm particularly fond of "OH, Would I" The tiny piston is out of a small CC Moped. Great start Everyone!

[Tommy's Cycle]

WHOOPS! Here's one more. Thanks Everyone!

[Dodge Dude]

the pistons are great! very nice artwork!

[cecce]

Great work everyone!
MikeRogers: That Photoshop-job is great!
Jigger: Super!
JohnnyJalopy: I dig it!
Russian: Welcome. Show us more please!

Here's a poster I did for the upcoming Swedish event Speed Weekend. A speed trial on ice.

[Merlin]

Originally Posted by MikeRogers

Nice early start to the stuff this week - Cool stuff Bob, Tod & Fortypickup!

Having a bit of fun with a Henry J Gasser in Photoshop:

1951 Henry J - Altered Mini Hot Rod by Mike Rogers 303, on Flickr

A mini Henry I like it.

[gassercrazy41]

Originally Posted by BOMONSTER

'38 Willys scratchboard I did for a nice guy who wanted to do something nice for his pop. Jigger, I love all your stories this week. Johnny Jalopy: Really like the coupe. And on and on...

that thing is way cool man!

[Alex D.]

Originally Posted by fortypickup

I Love Hot Rods...

Great work
Liked no. 15 so much that I had to use it as my desk top back ground.
Hope you dont mind

[Martin Squires]

The new year is always an exciting time as it's a good opportunity to develop some new work and explore some new techniques. Here are a couple of sketches and a mono print based around board track racer Albert "Shrimp" Burns.


Albert "Shrimp" Burns
(sketchbook page)

""Shrimp" Burns was one of the top dirt and board track racers of the 1910s and early '20s. The diminutive Burns rode for both the Harley-Davidson and Indian factory teams during his career. He was the youngest champion of his era, winning his first titles at the tender age of 15. "
AMA Motorcycle Hall of Fame


"Shrimp on the home straight"
(sketchbook page)


"Shrimp on the home straight"
(Mono print, etching ink on Bristol Board)

Mono print is a technique I've been wanting to get to grips with for a while. It consists of painting directly onto a sheet of glass with an oil based etching ink. A piece of paper is then laid on top of the sheet and rubbed to press the ink onto the paper. The advantage of using glass as a printing plate is that you can place a sketch underneath it as reference as seen by the mirrored image above.

www.martinsquiresautomotiveillustration.blogspot.c om

[kismyss]

Hello, this is my first post here. Hav'nt ever showed this to anyone but friends and family. Took me a year to build this FED. Frame is all stainless tig wire, front wheels are throwing stars, back wheels are solid pipe with valve handles in the centers. The blown injected hemi is all made of pipe fittings. I wired the correct firing order and put a vaccum cleaner belt on for the blower. The valve covers are solid steel, used a hack saw to make the fins. Headers are stainless tubing. The steering works, has gauges and steering wheel under the stainless body. Thing weighs a ton, hope you guys like. Rusty

[brett4christ]

Great job everyone!!!! Not a slacker in the whole bunch!! (Exccept for me....nothing this week!)

Tommy - Is there any you could find it in your heart to "document" your process? No way I could do it, just curious about how it's done!!!!

Rusty - That FED is NUTS!!!! I'm talking PISTACHIOS!!!!!!!

Keep'em coming guys!

[Lucky3]

Originally Posted by Tommy's Cycle

A few "Knifed Up" real pistons this week. I'm particularly fond of "OH, Would I" The tiny piston is out of a small CC Moped. Great start Everyone!

Soooo diggin these pistons. Very cool !!

[bonez]

Originally Posted by Tommy's Cycle

A few "Knifed Up" real pistons this week. I'm particularly fond of "OH, Would I" The tiny piston is out of a small CC Moped. Great start Everyone!

Fuckin great! But i NEED to know how you do them? Dremel'em out?? or what.

[stealthcruiser]

Originally Posted by kismyss

Hello, this is my first post here. Hav'nt ever showed this to anyone but friends and family. Took me a year to build this FED. Frame is all stainless tig wire, front wheels are throwing stars, back wheels are solid pipe with valve handles in the centers. The blown injected hemi is all made of pipe fittings. I wired the correct firing order and put a vaccum cleaner belt on for the blower. The valve covers are solid steel, used a hack saw to make the fins. Headers are stainless tubing. The steering works, has gauges and steering wheel under the stainless body. Thing weighs a ton, hope you guys like. Rusty

That's excellent, Brother!!! Nice detail!

[mx6262]

Originally Posted by kismyss

Hello, this is my first post here. Hav'nt ever showed this to anyone but friends and family. Took me a year to build this FED. Frame is all stainless tig wire, front wheels are throwing stars, back wheels are solid pipe with valve handles in the centers. The blown injected hemi is all made of pipe fittings. I wired the correct firing order and put a vaccum cleaner belt on for the blower. The valve covers are solid steel, used a hack saw to make the fins. Headers are stainless tubing. The steering works, has gauges and steering wheel under the stainless body. Thing weighs a ton, hope you guys like. Rusty

What scale is this ?????

LOVE IT!!!!!

[kismyss]

Thanks for the nice comments, not sure what scale it is. Just built the dragster to fit the motor. Always build the motor first. The whole thing is about 2 ft. long, 8 in. wide. Probably 30 lbs. Thanks Rusty

[BOP-Nut]

Jigger- "Dreamer" is fantastic, great work man.
kismyss- Nice! Great detail.
Britt8m- I dig that, good overall feel to it.
Martin Squires- Nice work, dig it.
Fool Injection-I like the vibe of that photo, what year is it from?

[Tommy's Cycle]

Originally Posted by bonez

Fuckin great! But i NEED to know how you do them? Dremel'em out?? or what.

Hand-made knife to rough them out and a Foredom Flex Shaft machine with a 42 Handpiece and misc. carbide burs, for the finish work. That's the secret, now lets see some other pistons next week! Remember, just like in a car build, the weakest metal always surrenders first

[Mike6Kerns]

Hello everyone, New here and wanted to post a piece I've been working on. Let me know what you think and what I may need to work on.
Love checking on this thread every Friday, If the kids let me, and getting back into the art scene.

[TIME TRAVELLER]

Mono print is a technique I've been wanting to get to grips with for a while. It consists of painting directly onto a sheet of glass with an oil based etching ink. A piece of paper is then laid on top of the sheet and rubbed to press the ink onto the paper. The advantage of using glass as a printing plate is that you can place a sketch underneath it as reference as seen by the mirrored image above.

www.martinsquiresautomotiveillustration.blogspot.c om[/QUOTE]

Beautiful work and a neat process. Love your website. (Sounds like France is not a friendly place for bikers!)

[TIME TRAVELLER]

Originally Posted by kismyss

Hello, this is my first post here. Hav'nt ever showed this to anyone but friends and family. Took me a year to build this FED. Frame is all stainless tig wire, front wheels are throwing stars, back wheels are solid pipe with valve handles in the centers. The blown injected hemi is all made of pipe fittings. I wired the correct firing order and put a vaccum cleaner belt on for the blower. The valve covers are solid steel, used a hack saw to make the fins. Headers are stainless tubing. The steering works, has gauges and steering wheel under the stainless body. Thing weighs a ton, hope you guys like. Rusty

Beautiful work. Love those front wheels - well done.

[Mike6Kerns]

A stencil I'm working on for airbrushing.

[Tommy's Cycle]

Originally Posted by Mike6Kerns

A stencil I'm working on for airbrushing.

That's really cool!

[Mike6Kerns]

A 55 Gasser and Coke caps on the frig.

[Mike6Kerns]

Thanks for the comment Tommy's Cycle.

[oddrodgarage]

Originally Posted by chaddilac

Did this for another hamber.... The "Well Driller" going on a 64 chevrolet drag car.

awesome

[oddrodgarage]

Originally Posted by johnnyjalopy

kool start guys!,,i never make the first page..yes!..I hope
two new pieces..hope you dig them..johnny

great work John...dig 'em both

[G V Gordon]

Great show so far everyone!
Buick59, had to go get my shades with all that bling. Nice shots.
Tommy's Cycle Those pistons are amazing, very nice work.
Martin Squires, I love pencil sketches and board track stuff so, two thumbs up!
Kismyss, Great detail and scale on that FED, Very unique.

Actually got a paying gig yesterday. Do a little work for a local the local scooter builders.
Put a little color on the black and silver bike.
The fat tanks was a lettering job I did for them awhile back but had not seen it cleared.

Sorry for the crappy pics, all I had with me was my cell phone.










Oh and an old blue sparkle helmet with a weird Cap'n America vibe. LOL

[Russian]

ok, one more

[dustdevil]

great pieces so far...gary=always something creative, jigger=love the dreamer, todd=cool commission piece, j-jalopy=very nice details, tommy=those pistons are so cool!! Keep up the great talent on here. Working on a new piece myself.

[Dan Greenberg]

Great start Bob and everyone else!

Here are a few old one from last years GNRS. I am excited to get out there next week. http://www.pbase.com/dlgphoto/gnrs2011&page=all

[brett4christ]

Nice lines, GV!!!

[mctim64]

Cool!

[xhotrodder]

Great work as usual guys. Love the new stuff from Mike6Kerns & Kismyss. Keep it coming guys.

[krome]

SSM 1951 Merc by Sunday Slacker Magazine, on Flickr

SSM 1951 Merc by Sunday Slacker Magazine, on Flickr

SSM 1951 Merc by Sunday Slacker Magazine, on Flickr

Sunday Slacker Garage Feature. Steve Pinto. 1951 Merc for a Chicago Cubs baseball player. Photo by Gabe Garcia

[TaylorCrawford]

Originally Posted by Buick59

Been hiding for what seems like a few months. Working on a Lowrider coffee table art book. A couple of images from some recent shoots.

Lowerider bikes are so bitchin!

[TaylorCrawford]

[LOWCAB]

Well this is the MOTEL sign I talked about last week.
Well, finally done. About 38" wide. Based on the Vagabond Motel sign in Fresno.
Hope this isn't too OT. Just think of it as something Route 66ish.

BR

[WhateverWeber]

Hey!
Happy Friday!!
Boss said he was doin' it one more time, and this time it was my turn...
I begged Him and Sue to let me use this shot.
Andy didn't really care for the idea of his image on the design, he's pretty low key. One of the Nicest, most humble, giving people I have ever known...this isn't A$$ kissing either. ANYBODY who has met Andy will tell you the same. I said "pleeeease Andy, let me use this...you look like a superhero, it looks like you should be wearing a cape!" He knows I am weird, and after a pause (I assume to process my nearly incoherent rambling) he says "I don't know, let me ask a few people what they think."
Two days later Sue gives me the OK!
I believe it was another low key Hot Rod Legend that convinced him it was okay...Thank You Roy!!!
Thank you Terri for all of your help!

[dgang26]

Originally Posted by Buick59

Been hiding for what seems like a few months. Working on a Lowrider coffee table art book. A couple of images from some recent shoots.

Buick
Love the shot of the single bike !
I am still learning photography -- so please excuse my lack of knowledge but I don't understand how you lit this shot.
The sun (or light) is coming from the right (or a bit behind) causing the shadows -- yet the front side side of the bike is perfectly lit - with no shadows behind the bike. Love this style and was just wondering if you would help me understand how you did it
Thanks

[Buick59]

Originally Posted by Tommy's Cycle

WHOOPS! Here's one more. Thanks Everyone!

Your work is simply amazing!

[roseville carl]

Jigger the dreamer ia awsooome!

[cool37]

As always....some nice stuff!

[hrm2k]

Originally Posted by Jigger

Here's a series of sketches I've whipped out of the recesses of my dusty brain to consider for the 14th HAMB art challenge... the contender will be colored.

"Blue Coupe" Clark's 'T', flyin' high...




"All Washed Up"



"Dreamer"

Mark, while I really like the first sketch, Blue Coupe ( go figure...) " Dreamer " is very very cool. I would have a hard time figuring which one to vote for
John

[Dan Greenberg]

Originally Posted by kismyss

Hello, this is my first post here. Hav'nt ever showed this to anyone but friends and family. Took me a year to build this FED. Frame is all stainless tig wire, front wheels are throwing stars, back wheels are solid pipe with valve handles in the centers. The blown injected hemi is all made of pipe fittings. I wired the correct firing order and put a vaccum cleaner belt on for the blower. The valve covers are solid steel, used a hack saw to make the fins. Headers are stainless tubing. The steering works, has gauges and steering wheel under the stainless body. Thing weighs a ton, hope you guys like. Rusty

Awesome detail and everything else! Welcome to FAS.

[Dan Greenberg]

Originally Posted by Jigger

Spoggie is back! Get a 'hold on' that 'Holden'.


"Dreamer"

Definitely my choice of the three - love it!!

[notrod13]

since its the 80th of the 32 i thought id throw down one of my faves... richard graves 32 delivery ....

[Buick59]

Originally Posted by dgang26

Buick
Love the shot of the single bike !
I am still learning photography -- so please excuse my lack of knowledge but I don't understand how you lit this shot.
The sun (or light) is coming from the right (or a bit behind) causing the shadows -- yet the front side side of the bike is perfectly lit - with no shadows behind the bike. Love this style and was just wondering if you would help me understand how you did it
Thanks

Reflectors. Westcott reflectors.

[Jeff Norwell]

The Second Annual Legends show .March 2nd in Sealy TX....
The Poster for the show.......

[Jeff Norwell]

And at the show...A very Special tribute to the Great Texan Drag Racer..Bobby Langley....go and get bit by the Scorpions....

[Gigantor]

I put this together for the pre-war competition but missed the fine print where it said it needed to be a coupe! Doh!



Uploaded with ImageShack.us

[Dan Greenberg]

Originally Posted by notrod13

since its the 80th of the 32 i thought id throw down one of my faves... richard graves 32 delivery ....

Fantastic shot! Love the car, the scene, the lighting!

[oddrodgarage]

WhateverWeber...always a fan of your artwork
Jeff Norwell...stellar as per usual...just did some tee shirts for my buddy Bill Crosby featuring the Scorpion V

[bmnnevels]

this is an older piece i that i did last year but if anybody is interested i have it for sale for $200,00. just send me an email at bmnnevels@yahoo.com.


web page
www.nevelsdesigns.com

[Jeff Norwell]

Thanks Ken!

[Buick59]

Originally Posted by hrm2k

Mark, while I really like the first sketch, Blue Coupe ( go figure...) " Dreamer " is very very cool. I would have a hard time figuring which one to vote for
John

Dreamer is the great one!

[blackbaron]

Some my new stuff...

[artracer]

16"x20" acrylic on canvas. This will be for sale at the Detroit Autorama. I should also have a limited number (25-50) of prints available. Stop by and say hello if you're going to be there!

[BOMONSTER]

I'm having one those crazy, busy OT weeks where I'm too busy to open the mail, kiss the wife, change my shirt, check the HAMB. Then I open the FAS and dig on the entries like the kssmyss ninja star-wheeled dragster, taylorcrawford's gold and white stripes, 49 buick's wolcott relflector shot, dan greenberg's alex gambino chevy pic, lowcab's route 66 motel sign, and many others from the talent-filled regulars and newcomers and it keeps me coming back for more and wanting to be better. Bernie: You should paint your photo of the painting on the wall. Nice still life. BO

[bbb]

Good work guys Here's a few from the end of last year, Barris came over the the UK for a show and was reunited with a few of his old cars. He put the masking up on the Merc to show how he would chop it.


Rhythm-Riot-2011-223 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-221 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-220 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-219 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-213 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-211 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-207 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-206 by NickGrant.co.uk, on Flickr


Rhythm-Riot-2011-123 by NickGrant.co.uk, on Flickr

[car-tooner]

finished this one up last week....enjoy

[Rocfrog]

GREAT FAS as always!!

Not 100% sure this is HAMB friendly but it's what I have been working on this week for a shirt print.



Nick

[WhateverWeber]

Originally Posted by oddrodgarage

WhateverWeber...always a fan of your artwork
Jeff Norwell...stellar as per usual...just did some tee shirts for my buddy Bill Crosby featuring the Scorpion V

Thank you Ken!

[Tommy's Cycle]

Originally Posted by car-tooner

finished this one up last week....enjoy

Hey Scott, Really cool! Are you coming out to the GNRS this year?

[ewt2]

Wow Fantastic stuff today! Jeff that artwork is just so damn inspirational!

This is a drawing of Genevieve Chappell "The Queen of Cars" We're working on a series of drawings. This the first...
Here's her website: http://www.genevievechappell.com/
She's a blast to work with! If your going to the GNRS we'll be there (bldg 9), and I'll have the original of this and a few others. Hunt us down! Say howdy...


"Genevieve Chappell and a 1940 Indian" 24x30 pencil on board

[cixpack]

Hi everyone,

Great show so far, here's my low contribution.

[ToddJ]

Tillrock- Beautiful work! Geneveive is gonna love it, man!

Norwell- Hot Damn! Fantastic work, man!

Tommy's Cycle- So KILLER!

Car-Tooner- AWESOME!

[Limefire]

I've been working on muscle car stuff and doing some tractor pull designs for t-shirts so I haven't had much to post. This is lifted from a car show design I recently did. Once again there is a lot of great art being posted, 57 Corvette ~ Bob, GaryC., fortypickup, johnnyjalopy, BOMONSTER, Buick59, Tommy's Cycle, Martin Squires, kismyss, Dan Greenberg, LOWCAB, WhateverWeber, Jeff Norwell, Ed Tillrock and others! Inspirational as always.

[Stone]

Great show as always guys.
GaryC. I love it. I would definately buy that for my boys if it was a HotWheels car.

[johnnyjalopy]

thanks guys for your kind words..johnny!

[57 Corvette ~ Bob]

Creative and inspiring work .........

[Gaters]

I'm stunned every Friday visiting this post. Such great talent all. I wished I had a museum or a gallery to put it all in. What a great collection it would be.

It may have been done before, I apologize ahead of time. Have all of you ever tried to do a theme where you would pick any hot rod known or not know and do your own interpretation using all the different mediums? It'd be great to see where all the different talents would take it. Metallurgy, oils, water color, pencils, skateboard, cartoon, pinstripe, photos, Photoshop, illustration, etc. In any setting too.

If it was done, can you steer me to the past thread? If not, my suggestion is the first cover of Hot Rod Magazine roadster built by Regg Schlemmer.

Just a thought.

Thanks for all your present and past postings fellas. Big fan of all.

Chris

[PRIMERDAVE]

My good friend Rod Powell just dropped by with this....totally made my day


Sent from my iPhone using TJJ

[Buick59]

Originally Posted by cixpack

Hi everyone,

Great show so far, here's my low contribution.

Friggin awesome! I would love to drive a car like this!

[Jigger]

Jeff N.those render]ings nearly render me speechless. The energy you've created with the technique used in the first one would send me into a seizure were I pre-disposed to being an epileptic...(no offence to those who suffer, but consider this a warning ...) Stunning detail sir!!!

ED T., That really turned out brilliantly.

Youz guys inspire!

Thanks to all who have taken time and said such nice things about the "Dreamer" sketch. That on came to me as a spontaneous inspiration yesterday afternoon. After working out the sketch, my 16 year old (artist) daughter,Abby, saw it and said, "That better be me in there..." Of course, she meant driving the car... So the kid, much younger, is loosely based on her. Though I plan to complete all, this one will be priority. Again, thanks to all who suggested as such.

Originally Posted by Gaters

I'm stunned every Friday visiting this post. Such great talent all. I wished I had a museum or a gallery to put it all in. What a great collection it would be.

It may have been done before, I apologize ahead of time. Have all of you ever tried to do a theme where you would pick any hot rod known or not know and do your own interpretation using all the different mediums? It'd be great to see where all the different talents would take it. Metallurgy, oils, water color, pencils, skateboard, cartoon, pinstripe, photos, Photoshop, illustration, etc. In any setting too.

If it was done, can you steer me to the past thread? If not, my suggestion is the first cover of Hot Rod Magazine roadster built by Regg Schlemmer.

Just a thought.

Thanks for all your present and past postings fellas. Big fan of all.

Chris

Chris, I used this image from that same book to create this quick sketch, done in a digital format:

Originally Posted by Kiwi Kev

Originally Posted by Jigger

Great thread! Tons of eye candy!



This one may have inspired my illustration:

[Jigger]

Originally Posted by artracer

16"x20" acrylic on canvas. This will be for sale at the Detroit Autorama. I should also have a limited number (25-50) of prints available. Stop by and say hello if you're going to be there!

Beautiful!

[Jigger]

Originally Posted by cixpack

Hi everyone,

Great show so far, here's my low contribution.

Great work cixpack ! ! !

[LOWCAB]

Here is something I finished up today. I hope you don't mind a Hot Rod of a different sort. I'll get rid of it Jeff if I'm too OT on this one. 24"X24" Acrylic on wood.

BR

[ToddJ]

Buick59- those lowrider bike shots are spectacular, man!

whateverweber- love the Tee design with Andy and his T!

[Jigger]

Bernie, I forgot to mention how much I like your stuff. De plane es muy fantastico!

Originally Posted by hrm2k

Mark, while I really like the first sketch, Blue Coupe ( go figure...) " Dreamer " is very very cool. I would have a hard time figuring which one to vote for
John

Thanks John, glad you like...
It was suggested, by a friend, that I animate the drawing of the coupe and I just might, given the time... I keep looking at what I need to do to improve the car and that detail will have to come first...

[baronvonfrankenstine]

just finished this one

[Toyghoul]

Great stuff everyone! Here's my new T shirt design for me and my fellow model geeks and some other new stuff.

[cixpack]

thanks so much buick 59 and jigger

[philo426]

My latest project!

[Silhouettes 57]

Originally Posted by baronvonfrankenstine

just finished this one

Wrenched Ankle!

[S.Cool.Art]

Here is another piece done recently on my new Cintiq.

[Martin Squires]

Thank you for the kind comments.
I have found the French bike scene fantastic. They are into all sorts of contraptions. The best thing I've seen so far was an Anzani twin pace bike at Monthlery in 2011.

[Jokem59]

Lowcab, I really like your MOTEL sign.
If you are OT then I'm OT.

My finished piece from last weeks preview. Tiki Motel sign - laser cut pieces and hand painted - about 28" x 18".

[Martin Squires]

Originally Posted by Jeff Norwell

The Second Annual Legends show .March 2nd in Sealy TX....
The Poster for the show.......

Love this poster a real inspiration. Was this all done digitally or was it sketched the ol' way first?

Roll on next Friday!

[sambo]

Here's my first painting for 2012-guess it's gonna a be another bad year! Oh well, I had fun

[eric54chevy]

Originally Posted by LOWCAB

Well this is the MOTEL sign I talked about last week.
Well, finally done. About 38" wide. Based on the Vagabond Motel sign in Fresno.
Hope this isn't too OT. Just think of it as something Route 66ish.

BR

Bernie, man that is nice

[Buick59]

Originally Posted by LOWCAB

Here is something I finished up today. I hope you don't mind a Hot Rod of a different sort. I'll get rid of it Jeff if I'm too OT on this one. 24"X24" Acrylic on wood.

BR

Thats just a FANTASTIC piece Bernie!

[Slim Pickens]

OK! Fantastic as always, thanks for the inspiration.
A few from Reading, PA.
Slim

[chettar]

The first poster with the FED that Jeff did is of an actual 1961 Pontiac powered dragster built and still owned by another Texas Legend Bob Malone and his car as well as Scorpion I and V will perform in the Cackle Fest and the Bobby Langley presentation at our event. Cool Stuff.....Again Thanks Jeff these posters are over the top!

[Fool Injection]

Originally Posted by BOP-Nut

Fool Injection-I like the vibe of that photo, what year is it from?

Around 2008 at a place called Great Yarmouth, England. I messed around with it a little.

[LowerthanLife]

dont be so hard on yourself sambo... your art can hang w the rest of em'.

[timebombkustoms]

Great show this week everyone,here is my offerings for the week...

[jdustu]

Terrific show, The Fed sculpture rules. And now that I know the "secret" to piston carving...riiight! The carved slugs rule as always.

I'm out of town for a few more weeks, but after that it's gonna be ON!

[RAZIN CAIN]

Originally Posted by Jeff Norwell

The Second Annual Legends show .March 2nd in Sealy TX....
The Poster for the show.......

Jeff......Holy Crap!!

[RAZIN CAIN]

Originally Posted by Jeff Norwell

And at the show...A very Special tribute to the Great Texan Drag Racer..Bobby Langley....go and get bit by the Scorpions....

Damn......

[cixpack]

Sambo > if this year could look as good as your artwork, it would be really poetic and well rounded...
Jones > Always so nice to see some fresh ink from you ! That 57 is looking mean !
Jigger > I love the way you did those two unchopped roofs ! fantastic as always.
Bomonster > Atmosphere is incredible...
Norwell > So inspiring, so vibrant.

and so many more ... another great show !

[erlomd]

Here's a few artsy shots done by a fan at the Daytona turkey run of my brothers dodge truck

[Tommy's Cycle]

Originally Posted by ToddJ

Buick59- those lowrider bike shots are spectacular, man!

whateverweber- love the Tee design with Andy and his T!

Originally Posted by timebombkustoms

Great show this week everyone,here is my offerings for the week...

Great stuff Jasyn. I like the 665-1/2......kinda like me, not ALL bad

[realkustom51]

Great show everyone. Here is a customcory shop floor scrap.

[WhateverWeber]

Killer Show!
Thanks for the kind words!!
Norwell is T H E MAN!!!

[Unkl Ian]

Cory nails it, as always.

[Gaters]

Originally Posted by Jigger

Chris, I used this image from that same book to create this quick sketch, done in a digital format:

Yeah! I'd recognized your artwork as the old dry lakes photo, love it. It would be great to see you guys pick on a theme like that.

I realize a lot of what is submitted may be projects that you've been working on or worked done in the past. Nonetheless, my mind was racing at the thought.

[fortypickup]

WOW...just WOW! What a great show!

To much kool stuff to mention, so here's what I want all you great artists to do...

1) Git up off your computer chair
2) Go out and get in your ride
3) Close the door
4) Look at the rearview mirror
5) Adjust it so you see yourself in the mirror
6) Point a finger at yourself
7) Recite after me "You Kick ASS"

My way of patting you all on the back!!

Thanks for the kind words on my junk!

[Magic Pineapple]

Great work all,just a few things keeping busy.

[fleet-master]

the talent on here is truly amazing!! i love checking out the Art show each Fri and thought maybe I'd post up a couple drawings i did waaay back when i was knee high to a grasshopper....hope you like

[kustomfleetline]

.....first time postin' in the art show... hope you guys like it... it'a a '31 Model A built by Jason Graham for Larry Tucker.... it was featured in R&C January 2012..

...ya'll got some awesome stuff this week!!

[bustedlifter]

Originally Posted by Russian

my first contribution to FAS

Cool, I like it!

[robschwager]

Great work everybody!

[tcb-77]

Is it possible to upload pics from android ph
one. I cant figure it out thanks

[krayola]

That 665 1/2 sign is awesome!

Rumble at Roswell Cinematic Print that I just finished and had printed and is 24x12.

$40+shipping. Paypal preferred and I ship internationally. Domestic orders get free tracking.



More detail.

[dmccraryart]

It's kinda late, but here is a water color I finished last week

[Mad Mark]

Originally Posted by Tommy's Cycle

A few "Knifed Up" real pistons this week. I'm particularly fond of "OH, Would I" The tiny piston is out of a small CC Moped. Great start Everyone!

Dang, not only are you prolific you outdo yourself every week!

[edweird]

Originally Posted by dmccraryart

It's kinda late, but here is a water color I finished last week

my favorite on the FAS this week.

[safari-wagon]

Originally Posted by kismyss

Thanks for the nice comments, not sure what scale it is. Just built the dragster to fit the motor. Always build the motor first. The whole thing is about 2 ft. long, 8 in. wide. Probably 30 lbs. Thanks Rusty

Rusty, that's quite a nice way to introduce yourself to this gang!
Excellent piece sir.

Jigger, Norwell, Gigantor, Bernie- Killer stuff, you guys always rule!

Ed, I wanna be you in my next life.

[dmccraryart]

Great work, everybody - I just took a quick look through the pages while I'm
supposed to be working... an amazing array of talent on here!

[Jigger]

This is very very nice and not a minute too soon

Originally Posted by dmccraryart

It's kinda late, but here is a water color I finished last week

Thanks Larry!

Originally Posted by safari-wagon

Rusty, that's quite a nice way to introduce yourself to this gang!
Excellent piece sir.

Jigger, Norwell, Gigantor, Bernie- Killer stuff, you guys always rule!

Ed, I wanna be you in my next life.

I'm with Larry and Neal, too many great pieces to mention and thanks to all the new guys for spicing up the joint!

Rusty, is it? That rail dragster is great!

[notrod13]

Originally Posted by S.Cool.Art

Here is another piece done recently on my new Cintiq.

looks like a shot I did of chris casnys coupe in burbank

[redlinetoys]

A lot of different styles of art here this week. Very nice!

[edweird]

heres my offering to the gods of art.

[Carbs & Chrome]

Originally Posted by Pure Hell

Man all such cool stuff you guys.. Real work won out again....

Sooo...more fun on my I-phone....

What are you using on your iPhone?

[sololobo]

Got Art!! Yeah, I'll say, just an outstanding show this week folks. thanx for the class work! ~sololobo~

[enfieldjoe]

Originally Posted by edweird

heres my offering to the gods of art.

Ed: That "White Trash" sign art is bitchin!

[kismyss]

Thanks to all for the kind words. I got alot more up my sleeve. Don't want to show it all at once! See ya'll next week. Rusty

[john mullen]

This is my favorite part of the HAMB ...Great work fellas! Hear's my contrabution this week...