Welcome to the THE H.A.M.B. forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Go Back   THE H.A.M.B. > General Discussion > The Hokey Ass Message Board

Reply
 
Thread Tools Display Modes
Old 10-26-2011, 09:52 AM   #1
56 rusty nailhead
FNG
 
56 rusty nailhead's Avatar
 
Join Date: Oct 2011
Location: savannah ga
Posts: 8
Default 1956 buick carb adapter plate any suggestions???

My Buick has a 322 nailhead in it with a 4 barrel. The 4 barrel is shot so i did some research and found out that summit makes an adapter plate for the intake to put an edelbrok 600 on it. I already have the carb, but does anyone know what the part number is to the adapter plate I should buy, or any way to figure this out. Any help would be awesome. Thanks

rustynail
offline   Reply With Quote
Old 10-26-2011, 09:55 AM   #2
George
Old School HAMBer
 
George's Avatar
 
Join Date: Jan 2005
Location: Ft. Walton Bch.,Fla.
Posts: 5,999
Default Re: 1956 buick carb adapter plate any suggestions???

Can't you just look it up on the Summit site? Hot Heads carrys the Offy adaptor, probably cheaper @ summit.
__________________
Confucious say Tennis elbow better than Tennis balls
offline   Reply With Quote
Old 10-26-2011, 10:02 AM   #3
56 rusty nailhead
FNG
 
56 rusty nailhead's Avatar
 
Join Date: Oct 2011
Location: savannah ga
Posts: 8
Default Re: 1956 buick carb adapter plate any suggestions???

I called up there and they said he doesnt see one they have that will fit but there was a thread about this on this forum that someone did but they never gave out the part number just that they got it from summit and its an adapter plate
offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-26-2011, 10:04 AM   #4
George
Old School HAMBer
 
George's Avatar
 
Join Date: Jan 2005
Location: Ft. Walton Bch.,Fla.
Posts: 5,999
Default Re: 1956 buick carb adapter plate any suggestions???

www.hothemiheads.com Check out theirs if no one else comes up with a cheaper place.
__________________
Confucious say Tennis elbow better than Tennis balls
offline   Reply With Quote
Old 10-26-2011, 10:11 AM   #5
56 rusty nailhead
FNG
 
56 rusty nailhead's Avatar
 
Join Date: Oct 2011
Location: savannah ga
Posts: 8
Default Re: 1956 buick carb adapter plate any suggestions???

Ill check them out thanks but it looks like they are mostly for hemis not nailheads
offline   Reply With Quote
Old 10-26-2011, 10:35 AM   #6
Century
Grenade Inspector
 
Century's Avatar
 
Join Date: May 2009
Location: Toronto, Ontario, Canada
Posts: 144
Default Re: 1956 buick carb adapter plate any suggestions???

TRANS-DAPT 2064 is what you're looking for. The holes for the small pattern are not drilled out. If you order from them, they can do it for you.
offline   Reply With Quote
Old 10-26-2011, 06:59 PM   #7
56 rusty nailhead
FNG
 
56 rusty nailhead's Avatar
 
Join Date: Oct 2011
Location: savannah ga
Posts: 8
Default Re: 1956 buick carb adapter plate any suggestions???

Quote:
Originally Posted by Century View Post
TRANS-DAPT 2064 is what you're looking for. The holes for the small pattern are not drilled out. If you order from them, they can do it for you.

Thanks so much got it ordered and on the way nice century you have there too by the way

Rusty nail
offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:53 PM.