**1941-1946 Chevy Truck Picture Thread**

[Novadude55]

That is Nice,, just needs a sleeper,, lol
what engine/trans is in it?

[warrior1]

Originally Posted by carlisle1926

No, it won't fit. I've tried that one and it looked like crap. The front track of the Dodge wheels is so much wider than the 46 that the wheels stuck way out and just plain looked stupid. The turbo also has major clearance issues. I suppose if you removed the hood sides so that the turbo could squish out, you could also notch the fenders for the turbo. Also, a Cummins is pretty long and you would have to have it sitting in your lap to fit without it shoving through the grille. But, I'm sure it could be done with money.

thanks for the info. i have come back around to the plan of using a bbc in the truck.
heres mine. soon to be on a modern dually chassis

[29bowtie]

Originally Posted by Novadude55

That is Nice,, just needs a sleeper,, lol
what engine/trans is in it?

No idea, I found the picture on www.warhawks.se site in the picture section from early A-Bombers old style weekend coverage.

[Little Terry]

Originally Posted by hotdamn

bro not only is your truck seriously rad but your engine bay is spot on..

good eye

Thanks man. Appreciate it.

[Little Terry]

Originally Posted by HoldFast

Little Terry.... that truck is MONEY!

Not quite sure what you mean by that, but hey, thanks anyway!

[lockwoodkustoms]

Finally got my 42 out on the road

[Novadude55]

Originally Posted by lockwoodkustoms

Finally got my 42 out on the road

Bitchen Truck, about time you hit the road,,

[Little Terry]

Originally Posted by lockwoodkustoms

Finally got my 42 out on the road

Looks cool. Can you tell us more - drivetrain, suspension, any other mods???


Posted from the TJJ App for iPhone & iPad

[ONE CRUSTY ONE]

attended the Motorama @ Evergreen Speedway, Monroe Wa.
My friend Diane took this picture.

[lockwoodkustoms]

Originally Posted by Little Terry

Looks cool. Can you tell us more - drivetrain, suspension, any other mods???


Posted from the TJJ App for iPhone & iPad

Thanks Little Terry, Yes I would love to First off the chassis it is a 1994 S10 Chevy with 2.5 inch dropped spindles and S10 rear leaf springs. The wheels are the original 42 Chevy 6 lugs and they are 6.00 x 16's up front and 6.50 x 16's in the rear. I had order special adapters in order to run them and they kicked the wheels out to there stock track width on the truck. As for the drive line the engine is a fresh rebuilt 1975 Chevy Truck 350 c.i. 4 bolt main the the trans is a TH350 and the rear is a 2002 Chevy S10.

The body is all original as how I found it with the exception of the rear fenders. I had to find them things and make them appear to have been on the truck forever. The only mods I did to the body is I had to shorten the box 6 inches and shorten and trim the running board so they would fit properly. I am using the original interior as well even the steering wheel.

I have a post of it being built if you interested in seeing it.

[lockwoodkustoms]

Originally Posted by Novadude55

Bitchen Truck, about time you hit the road,,

Thanks Novadude55

[Little Terry]

Originally Posted by lockwoodkustoms

I have a post of it being built if you interested in seeing it.

Yes please. Looks similar to my truck in many ways, but a totally different setup and probably drives better than mine too!
LT.


Posted from the TJJ App for iPhone & iPad

[five-oh]

Originally Posted by lockwoodkustoms

Thanks Little Terry, Yes I would love to First off the chassis it is a 1994 S10 Chevy with 2.5 inch dropped spindles and S10 rear leaf springs. The wheels are the original 42 Chevy 6 lugs and they are 6.00 x 16's up front and 6.50 x 16's in the rear. I had order special adapters in order to run them and they kicked the wheels out to there stock track width on the truck. As for the drive line the engine is a fresh rebuilt 1975 Chevy Truck 350 c.i. 4 bolt main the the trans is a TH350 and the rear is a 2002 Chevy S10.

The body is all original as how I found it with the exception of the rear fenders. I had to find them things and make them appear to have been on the truck forever. The only mods I did to the body is I had to shorten the box 6 inches and shorten and trim the running board so they would fit properly. I am using the original interior as well even the steering wheel.

I have a post of it being built if you interested in seeing it.

Man, I love it! I am really envious of the stock but modified running boards. They are the one thing I'd like to change on Rusty. The S10 frame may not be traditional, but it sure makes for a nice driver..

[lockwoodkustoms]

Originally Posted by Little Terry

Yes please. Looks similar to my truck in many ways, but a totally different setup and probably drives better than mine too!
LT.


Posted from the TJJ App for iPhone & iPad

Here is the link of my build http://www.jalopyjournal.com/forum/s...=715291&page=3

And another of when I found it and what I was going to do with it

http://www.jalopyjournal.com/forum/s...d.php?t=699284

[ONE CRUSTY ONE]

Got involved with a "Photo Shoot with Sasha", where we used my Crusty Cruiser #1. Take a look.
Very interesting Day spent with professional models, and professional Photographers.
Some of these shots will end up in a Glamour Bridal Catalog.

[Novadude55]

Way to go Gary,, lol ,, sounds like fun

[lockwoodkustoms]

Gary that's cool congrats

[reising]

Here is my 41 COE,86 Chev 1/2 frame,350/350

[Novadude55]

Originally Posted by reising

Here is my 41 COE,86 Chev 1/2 frame,350/350

Oh the possibilities,,,

[chopt49]

Originally Posted by reising

Here is my 41 COE,86 Chev 1/2 frame,350/350

That is sweet.... thanks for showing it.



.