More scary ass modifications

[Joe T Creep]

So my friend brings her comet to my house to lower the back of it. It had the awesome stinkbug stance and she just wanted to level it out so that it would look more normal. My roommate and I got the back down to a normal level and just looked it over and when we got to the front and saw the springs, or what was left of them, we got a little scared. I dont know what part about this is my favorite. Ill let the pictures do the talking.
If you by chance know who did this, please take their tools away.

[skunx1964]

holy crap! i hope she didnt drive that home like that!

[poofus1929]

WTF? Mickey Mouse is at it again.

[FiddyFour]

holy shit, is that fuckin setup for REAL???

[Trashed & Hammered]

What's the problem? He used Lock Nuts!on the clamps.

[Alex Yohnk]

wow.....was that a tack weld on those springs too?

[FiddyFour]

Originally Posted by rustbelt

wow.....was that a tack weld on those springs too?

isnt a tac weld necessary for stack-clamping coil springs together?

[Rich Venza]

Kits like that were sold by the likes of JC Whitney and other in the 60's. For kids that didn't have a torch, it was a cheap way to lower a coil sprung front end.
I'll bet thousands were sold.

[terd ferguson]

I found the same kind of thing on the front of my '63 chevy pickup. The bottom coil was broken off and the rest of the spring was sitting on top. It had the same kind of spring clamps on it.

[Al K]

Not even in my "sport-drinking" days would I have come up with that. Then again...what's the line about desperate times calling for desperate actions? Yikes,indeed!

[thunderbirdesq]

Originally Posted by Rich Venza

Kits like that were sold by the likes of JC Whitney and other in the 60's. For kids that didn't have a torch, it was a cheap way to lower a coil sprung front end.
I'll bet thousands were sold.

Yeah but... using them to hold a broken spring together??!!!

[Verbal Kint]

Did these clowns do any other "work" to her comet? Brakes, Ball joints, Wheel Bearings, etc

s.

[Alex Yohnk]

Originally Posted by FiddyFour

isnt a tac weld necessary for stack-clamping coil springs together?

you're right... i think i read that's how it was done in the 50's in "ol' skool rodz" magazine

I'm surprised that tac held.

[MIKE47]

I've seen worse. I have a customer who brought me his car to do some chassis work. The rear frame section was crooked and made badly enough to have to replace it from the front of the rear wheel wells all the way back but the front clip connection is made out of angle iron and pure luck. One 4" angle length on each side. He stills drives it around, against my suggestions.

[Von Rigg Fink]

I think i would be looking that ride of hers over real good , and letting her know what you found before letting it back out on the road..
not like you were looking for more work, but in the "keep it safe" type of advice.

I think its time for a new set of front springs..what else is lurking?

[1950ChevySuburban]

Thats why I liked having annual basic safety inspections in Missouri, as opposed to here in Arizona where shit like that shares the road with my family.

[Von Rigg Fink]

Originally Posted by 1950ChevySuburban

Thats why I liked having annual basic safety inspections in Missouri, as opposed to here in Arizona where shit like that shares the road with my family.

I would be surprised if some of those so called "inspectors" really know what to look for..or even know what they are looking at to begin with..I bet most of those M*&^er F$%kers dont know the difference between a snow cone and a butt plug

probably some autoshop flunkies..JM2C

who knows..you might find that one of those so called inspectors is moon lighting on the side doing Suspension lowering and up grades


i just put that suff up to piss off someone...did it work?

[Lunatic]

looks like mickey mouse's evil twin took over that day,funny thing is it lasted that long and its still working that way?

[Alex Yohnk]

Originally Posted by Von Rigg Fink

I would be surprised if some of those so called "inspectors" really know what to look for..or even know what they are looking at to begin with..I bet most of those M*&^er F$%kers dont know the difference between a snow cone and a butt plug

probably some autoshop flunkies..JM2C

who knows..you might find that one of those so called inspectors is moon lighting on the side doing Suspension lowering and up grades


i just put that suff up to piss off someone...did it work?

you'd have to be reaallly stupid to get a snowcone confused with a butt plug........there not even for the same body orfice.....I think.

[lostforawhile]

I wondered who would buy one of those kits, I think autozone here still sells them, car looks great and rides like shit.