|
Welcome to the THE H.A.M.B. forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! |
|
|||||||
 |
|
Thread Tools | Display Modes |
02-04-2009, 10:05 AM
|
#1 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
1949 - 1951 Mercury Parts/ Reproduction Parts List
Contents:
(1) Places to buy 1949-1951 Mercury parts (2) Some Mercury Customizers (3) Useful Threads (1) Places to buy 1949-1951 Mercury parts Birdhaven Vintage Auto Supply 515.674.3949 -Per Fatford, sells patch panels Bob's Classic Auto Glass http://www.bobsclassicautoglass.com/ -Glass, rubber and weatherstripping. Cars Inc - 1-800-227-7462 -Someone said "they have awesome replacement quarter panels for 1949 & 50 Mercury's. It does not show up on the WEB site but here are the part numbers #414911-Left Side #414912-Right Side. I just placed an order this morning and they sell for $849.00 ea" Classic Fabrication http://www.classicfabrication.com/ -Lists floor pans and rockers on their website Classic Mercury http://www.classicmercury.com/ -1949 through 1956 parts Classic New http://www.classic-new.com/ -Glass Concours Parts http://www.concoursparts.com/ -Suggested by Fatford Cross Canada Parts http://www.crosscanadaparts.com/cgi-...da/mgflist.htm -Patch panels, possibly also full rear fenders Customs Classics and Rods www.ccrod.com Tom -Repops the 49-50 bumper bolts, 51 bumper bolts, 49-53 hood bolts, Rebuilds door hinges. Dennis Carpenter www.dennis-carpenter.com -"I just bought a lot of 51 Merc rubber parts and hardware from Dennis Carpenter. Very quick shipping." Gene Winfield www.genewinfield.org 661.824.4728 -Door, fender, quarterpanel, trunk, tail pan, and rocker patches. Sells other stuff didn't ask. Very nice guy I hear he tends to be behind. Green Mountain -Nice rockers sold under MikeStude on Ebay. 802.948.2011 mkdundon@shoreham.net Strong reccomendation for their rockers: http://www.jalopyjournal.com/forum/s...2&postcount=28 HomemadeHardtop57 (HAMB member) I make the little outside window stainless trim clips...49-51 Ford and Merc John Kouw -Need contact info -Per Fatford is selling reproduction rockers, and is working on a a trunk floor The Lincoln/Mercury Old Parts Store www.lincolnoldparts.com -New, used and rebuilt mechanical, body and trim parts Mac's Auto Parts http://www.macsautoparts.com/ -Appears to sell sheet metal and other items Mad Greek Enterprises Pete 262.835.6372 -Sells used parts, has over 20 cars that are being parted out or are rebuildable. Mercury & More 1-360-687-3472 -The owner Merlin carries used, NOS, and reproduction parts. No website. Mercuryland http://www.mercuryland.com/ -Sells used and new parts, including rocker panels, rubber seals, etc. Mike Walser Mercury Parts Fritch, Tx 806-857-3123 -For a really good selection of used and some N.O.S. parts Motor City Hi-Performance http://www.body-panel.com/ -Motor City Hi-Performance in the Detroit area selling 49-50 Mercury rear quarters for two doors, and 49-51 rockers for two door and four door. Also seen on ebay. I have not used them, but I found them looking for a source for rear quarters. Mr Merc -Acquired by Mercuryland. Papke Enterprises 3/13JR: Bill Papke passed away recently from cancer. Here is a link to one of the guys who bought out his inventory: http://www.jalopyjournal.com/forum/s...highlight=merc Restoration Specialties & Supply http://www.restorationspecialties.com/ -Not sure what they sell for Mercs. Rock Auto http://rockauto.com/ -I have not used them yet Rubber The Right Way http://www.rubbertherightway.com/ -Rubber, weatherstripping and other products Mill's Supply, Inc. www.rustrepair.com -Mercury Quarters http://www.rustrepair.com/PARTS_PAGE...URY-LINCOLN.49 Suggested by Ether Steele Rubber Products http://www.steelerubber.com/ -Sells rubber and weatherstripping. St. Louis Spring Company Hand-crafted Leaf Spring Suspension since 1945 http://SaintLouisSpring.com 314-533-2132 Most orders made and shipped within one business day -Suggested by user Doctor Detroit Townsend Customs & Hot Rods Riverside, CA Matt Townsend 951.833.1835 slddn50matt@gmail.com http://www.facebook.com/TownsendsCustoms?sk=wall slddnmatt on the HAMB -Reproducing all kinds of sheetmetal for the cars, also does custom fabrication. (2) Some Mercury Customizers Extreme Kustoms Rick Erickson 21093 Grand Ave Wildomar, Ca 92595 www.ericksonskustoms.com -All sorts of fabrication for Mercury customs King Kustoms Rob Temecula, CA 951.415.7330 chopt50@msn.com http://www.kingkustomstemecula.blogspot.com/ http://www.facebook.com/pages/King-K...5057?sk=photos Townsend Customs & Hot Rods Riverside, CA Matt Townsend 951.833.1835 slddn50matt@gmail.com http://www.facebook.com/TownsendsCustoms?sk=wall slddnmatt on the HAMB -All custom fabrication for 49-51 Mercury customs, including chops, trim, glass. (3) Useful Threads Engine Mounts in a 1951 Mercury with Flathead http://www.jalopyjournal.com/forum/s...d.php?t=758900 Wiring Harness for 12V system with Flathead & 12V Generator http://www.jalopyjournal.com/forum/s...d.php?t=726431 See reply #14 for part numbers Pic Request: 1950-51 Mercury - behind installed dash http://www.jalopyjournal.com/forum/s...d.php?t=734471 Pic Request: '51 Mercury Firewall & Front Frame http://www.jalopyjournal.com/forum/s...d.php?t=599314 Opinions On This Exhaust Routing - '51 Mercury http://www.jalopyjournal.com/forum/s...d.php?t=666424 Starter for 8BA Flathead with Merc-o-matic http://www.jalopyjournal.com/forum/s...d.php?t=622529 1949, 1950, 1951 Mercury Pictures http://www.jalopyjournal.com/forum/s...d.php?t=192705 50 Merc Wiring diagram? http://www.jalopyjournal.com/forum/s...d.php?t=617294 49-51 merc unchopped customs lets see them! http://www.jalopyjournal.com/forum/s...d.php?t=289886 What size bias ply WWW"s on a 49-51 merc? http://www.jalopyjournal.com/forum/s...d.php?t=208333 1949 Mercury stance and tire size http://www.jalopyjournal.com/forum/s...d.php?t=748628 1950 Mercury Steering Column Guidance for FNG http://www.jalopyjournal.com/forum/s...d.php?t=723949 Rebuilding 1950 Mercury Column Shift http://www.jalopyjournal.com/forum/s...d.php?t=756822 1949/51 Mercury upper inner bushing? http://www.jalopyjournal.com/forum/s...d.php?t=758228 1951 mercury identification number http://www.jalopyjournal.com/forum/s...d.php?t=744780 Removing Mercury rear 1/4's http://www.jalopyjournal.com/forum/s...d.php?t=725894 __________________ 1951 Mercury Build Thread: http://www.jalopyjournal.com/forum/s...d.php?t=641282 Last edited by Pro Stock John; 04-07-2013 at 07:45 PM. |
|
|
|
02-04-2009, 08:15 PM
|
#2 |
|
FNG
Join Date: Feb 2009
Location: Maryland
Posts: 7
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Thanks John...killer list.
Here's one guys thoughts on a few of these folks that I have worked with and bought stuff from. Restoration Specialties are great folks...they have a ton of parts that nobody else has. Steele Rubber Products is just simply the best rubber and weatherstripping on the market....nuff said on that one. Mercuryland was kinda frustrating for me...took forever to get seals from them and when I got em they were hard as a rock...then took me forever to get them to take em back. be careful! Bob's Auto Glass...I've bought a windshielf from them, and really liked them a lot! Didn't buy rubber from them, cuz I found out that they buy their stuff from Steele and then resell it, but they don't guarantee it the way the original folks do...so, I played it safe and bought the gasket from Steele (again....love those guys!) don't really know the other folks...anyone else? Again...thanks John...great work...much appreciated. |
|
|
|
|
02-05-2009, 08:39 AM
|
#3 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Thanks, I can update the list if folks have more info or suggestions. I think feedback is very useful like yours.
|
|
|
|
|
02-05-2009, 09:42 AM
|
#4 |
|
Senior Member
Join Date: Jun 2005
Location: Hartville, Ohio
Posts: 1,473
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
This is a great list. I have been searching and searching for some sheet metal parts and a few other odds and ins, and the folks that make stuff for the 49-51 mercs are few and far between, which is really surprising in itself. Please update the list as you find things. Thanks John!
__________________
-Jon |
|
|
|
|
02-06-2009, 08:35 AM
|
#5 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
If folks have good/bad buying experiences please post them.
|
|
|
|
|
02-13-2009, 04:12 PM
|
#6 |
|
Grenade Inspector
Join Date: Jan 2007
Location: Denver
Posts: 254
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
http://www.papkeent.com/ Specializes in 49 -51 Mercs. Has a ton of parts but his prices are high. He also doesn't like to ship large items.
|
|
|
|
|
02-13-2009, 09:55 PM
|
#7 |
|
Grenade Inspector
Join Date: Feb 2007
Location: orange county
Posts: 240
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
"Green Mountain
-Nice rockers sold under MikeStude name per Unionvillehaunt. I cannot find a website." I emailed Mike and this is what he sent in return: "yes, i have all the merc parts, floors inners and outers, i sell them on ebay and direct at 802 948 2011, Mike" He has pics of the rockers on epay. Hope that helps but they are definately one of the best rockers (that I have seen) out there for mercs. |
|
|
|
|
02-14-2009, 12:25 AM
|
#8 |
|
Old School HAMBer
Join Date: Apr 2007
Location: Mangakino ........ New Zealand
Posts: 2,874
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Herb Scheffer
The Lincoln/Mercury Old Parts Store 888-500-9717 www.lincolnoldparts.com -New, used and rebuilt mechanical, body and trim parts |
|
|
|
|
02-16-2009, 11:08 PM
|
#9 |
|
Senior Member
Join Date: May 2005
Location: Houston,Texas
Posts: 1,932
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
who sells the the 3 piece back window rubber channel for a 49 merc?
EDIT I found it at www.classicmercury.com
__________________
BUILT NOT BOUGHT! Los CoChinos C.C Kustom 49-54 Chevy's Houston's custom,hot rod,classic car parts.Buy Sell Trade Last edited by skyrodder; 02-18-2009 at 10:55 AM. |
|
|
|
|
02-17-2009, 12:26 AM
|
#10 |
|
Member
Join Date: Nov 2008
Location: Brazil
Posts: 791
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
nice...
__________________
http://www.biographybase.com/biograp...t_Alberto.html |
|
|
|
|
02-17-2009, 09:17 AM
|
#11 | |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Quote:
|
|
|
|
|
|
02-17-2009, 09:18 AM
|
#12 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Updated.
|
|
|
|
|
02-17-2009, 09:36 AM
|
#13 | |
|
Old School HAMBer
Join Date: Feb 2003
Location: Detroit - The Murder City
Posts: 2,663
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Quote:
http://www.jalopyjournal.com/forum/s...d.php?t=256658 |
|
|
|
|
|
02-17-2009, 10:03 AM
|
#14 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Thanks for the info Kevin, that should help out other folks in the future.
|
|
|
|
|
02-17-2009, 10:33 AM
|
#15 |
|
Alliance Member
Join Date: Nov 2007
Location: NC
Posts: 811
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
John,
I have seen different products used when swapping an engine in the 49-51 mercs. Some bolt in some welded. Has anybody used this set up sold by Speedway? Attached Thumbnails |
|
|
|
|
02-17-2009, 10:45 AM
|
#16 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
I added Mercury & More to the list.
|
|
|
|
|
02-17-2009, 05:42 PM
|
#17 |
|
Alliance Member
Join Date: Feb 2006
Location: Minnesota
Posts: 975
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Tom at Customs Classics and Rods
ccrod.com repops the 49-50 bumper bolts 51 bumper bolts 49-53 hood bolts Rebuilds door hinges. |
|
|
|
|
02-17-2009, 06:47 PM
|
#18 |
|
Member
Join Date: Apr 2006
Location: San Antonio, Texas
Posts: 534
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
I used to deal with a company in Tennessee called Mercury Research Company. They were doing business by snail-mail & telephone only. Does anyone know if they still exist?
They were geared toward restoration and had a lot of soft and hard chassis parts for the 49 thru 51s. Updated 8/7/2011: Found out the original owner died and his son was left with the parts. The son was evidently not a car person and it is unknown whether he still has the parts stored or whether he has sold them. Last rumor was that he still had them stored in Memphis. Last edited by rotorwrench; 08-07-2011 at 09:52 AM. |
|
|
|
|
02-17-2009, 07:12 PM
|
#19 |
|
Grenade Inspector
Join Date: Feb 2007
Location: orange county
Posts: 240
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
|
|
|
|
|
02-19-2009, 05:01 PM
|
#20 |
|
Old School HAMBer
Join Date: Feb 2008
Location: Chicago North Side
Posts: 4,212
|
Re: 1949 - 1951 Mercury Parts/ Reproduction Parts List
Updated.
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 06:11 PM.