Register now to get rid of these ads!

Nailhead tech/Q&A links...

Discussion in 'The Hokey Ass Message Board' started by Fat Hack, Jul 14, 2006.

  1. Fat Hack
    Joined: Nov 30, 2002
    Posts: 7,709

    Fat Hack
    Member
    from Detroit

    Ok, there's always lots of interest in Nailheads around here, and since I was reading up on some of what's been covered in the past, I thought I'd throw together a list of links to threads on the HAMB dealing with various Nailhead questions and stuff.

    Some of the questions come up several times, and some info is repeated, but this makes finding the answer to your question...or just doing a little research that much easier!

    I'm sure I missed some, but here's a few to get you fellow Nailhead junkies started!

    Feel free to add any that I overlooked, to make this an easy springboard for other HAMBers looking for Nailhead info and answers to common questions!

    Dig in!

    :) :cool:


    322 Nailhead transmissions:

    http://www.jalopyjournal.com/forum/showthread.php?t=120083&highlight=nailhead


    425 carb replacement:

    http://www.jalopyjournal.com/forum/showthread.php?t=118733&highlight=nailhead


    401 Nailhead cooling:

    http://www.jalopyjournal.com/forum/showthread.php?t=119755&highlight=nailhead


    Nailhead into a 40 Ford:

    http://www.jalopyjournal.com/forum/showthread.php?t=119913&highlight=nailhead


    Nailhead generator mounting:

    http://www.jalopyjournal.com/forum/showthread.php?t=119157&highlight=nailhead


    Nailhead pic request:

    http://www.jalopyjournal.com/forum/showthread.php?t=118943&highlight=nailhead


    401 Nailhead into 63 LeSabre:

    http://www.jalopyjournal.com/forum/showthread.php?t=117991&highlight=nailhead


    Road draft tube and coolant crossover questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=118279&highlight=nailhead


    Six carb 364 question:

    http://www.jalopyjournal.com/forum/showthread.php?t=117566&highlight=nailhead


    Nailhead (401) valve spring source:

    http://www.jalopyjournal.com/forum/showthread.php?t=117720&highlight=nailhead


    Nailhead (322) spark plug recommendations:

    http://www.jalopyjournal.com/forum/showthread.php?t=117703&highlight=nailhead


    Nailhead cam recommendations:

    http://www.jalopyjournal.com/forum/showthread.php?t=19944&highlight=nailhead


    Weiand timing cover re-pops:

    http://www.jalopyjournal.com/forum/showthread.php?t=116141&highlight=nailhead


    Nailhead rebuild info in print:

    http://www.jalopyjournal.com/forum/showthread.php?t=114306&highlight=nailhead


    Switch-Pitch converter question:

    http://www.jalopyjournal.com/forum/showthread.php?t=114811&highlight=nailhead


    364 intake question:

    http://www.jalopyjournal.com/forum/showthread.php?t=114418&highlight=nailhead


    1956 Nailhead ID question:

    http://www.jalopyjournal.com/forum/showthread.php?t=114336&highlight=nailhead


    B.O.P. to Nailhead compatability question:

    http://www.jalopyjournal.com/forum/showthread.php?t=114266&highlight=nailhead


    322 to early Ford toploader clutch linkage question:

    http://www.jalopyjournal.com/forum/showthread.php?t=113871&highlight=nailhead


    322 to four speed question:

    http://www.jalopyjournal.com/forum/showthread.php?t=113615&highlight=nailhead


    322 in Model A radiator question:

    http://www.jalopyjournal.com/forum/showthread.php?t=112504&highlight=nailhead


    401 Nailhead questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=112356&highlight=nailhead


    322 pressure plate question:

    http://www.jalopyjournal.com/forum/showthread.php?t=112171&highlight=nailhead


    Nailhead multi-carb installation tech:

    http://www.jalopyjournal.com/forum/showthread.php?t=111590&highlight=nailhead


    322 starter/flywheel mods:

    http://www.jalopyjournal.com/forum/showthread.php?t=112083&highlight=nailhead


    Weiand 3x2 intake question:

    http://www.jalopyjournal.com/forum/showthread.php?t=111364&highlight=nailhead


    Eelco/NW Speed bellhousing question:

    http://www.jalopyjournal.com/forum/showthread.php?t=110354&highlight=nailhead


    Nailhead multi-carb intakes question:

    http://www.jalopyjournal.com/forum/showthread.php?t=110476&highlight=nailhead


    Source for 322 header flanges:

    http://www.jalopyjournal.com/forum/showthread.php?t=98129&highlight=nailhead


    Nailhead carb questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=108948&highlight=nailhead


    Nailhead exhaust manifold interchangeability question:

    http://www.jalopyjournal.com/forum/showthread.php?t=107904&highlight=nailhead


    Nailhead parts & services directory listings:

    http://www.jalopyjournal.com/forum/showthread.php?t=96479&highlight=nailhead


    401 to four speed question:

    http://www.jalopyjournal.com/forum/showthread.php?t=107058&highlight=nailhead


    Nailhead pricing question:

    http://www.jalopyjournal.com/forum/showthread.php?t=106507&highlight=nailhead


    Dynaflow question:

    http://www.jalopyjournal.com/forum/showthread.php?t=105147&highlight=nailhead


    Nailhead speed parts link:

    http://www.jalopyjournal.com/forum/showthread.php?t=104397&highlight=nailhead


    Nailhead ID questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=104313&highlight=nailhead


    Lakeheaders.com U-fab intakes question:

    http://www.jalopyjournal.com/forum/showthread.php?t=103966&highlight=nailhead


    322 mini starter question:

    http://www.jalopyjournal.com/forum/showthread.php?t=103777&highlight=nailhead


    Another Nailhead in a Model A radiator question:

    http://www.jalopyjournal.com/forum/showthread.php?t=102119&highlight=nailhead


    1966 Electra engine question:

    http://www.jalopyjournal.com/forum/showthread.php?t=102132&highlight=nailhead


    Nailhead trans adapter questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=101793&highlight=nailhead


    322 transmission adapter questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=99432&highlight=nailhead


    Nailhead casting number question:

    http://www.jalopyjournal.com/forum/showthread.php?t=99231&highlight=nailhead


    322 ID question:

    http://www.jalopyjournal.com/forum/showthread.php?t=98670&highlight=nailhead


    Question about Dyanaflow replacement options:

    http://www.jalopyjournal.com/forum/showthread.php?t=98077&highlight=nailhead


    Nailhead trans adapter questions:

    http://www.jalopyjournal.com/forum/showthread.php?t=98076&highlight=nailhead


    Nailhead to Ford C4 auto tranny question:

    http://www.jalopyjournal.com/forum/showthread.php?t=97034&highlight=nailhead


    Nailhead lifter valley question:

    http://www.jalopyjournal.com/forum/showthread.php?t=97346&highlight=nailhead


    264 vacuum line question:

    http://www.jalopyjournal.com/forum/showthread.php?t=96488&highlight=nailhead


    1956 Buick Nailhead driveline compatability question:

    http://www.jalopyjournal.com/forum/showthread.php?t=95996&highlight=nailhead


    Nailhead tripple 97 tuning/trobleshooting help request:

    http://www.jalopyjournal.com/forum/showthread.php?t=95489&highlight=nailhead


    425 cracked block question:

    http://www.jalopyjournal.com/forum/showthread.php?t=94116&highlight=nailhead


    Nailhead to 700r4 question:

    http://www.jalopyjournal.com/forum/showthread.php?t=93841&highlight=nailhead


    Blown early Nailhead link:

    http://www.jalopyjournal.com/forum/showthread.php?t=93667&highlight=nailhead


    1957-61 364 block question:

    http://www.jalopyjournal.com/forum/showthread.php?t=93709&highlight=nailhead
     

    Attached Files:

  2. LeadSledMerc
    Joined: Nov 29, 2003
    Posts: 4,105

    LeadSledMerc
    Member

    Thanks Fat Hack, there are some real good threads in here I know I missed.
    LSM
     
  3. Toystoretom
    Joined: Feb 25, 2006
    Posts: 112

    Toystoretom
    Member

    Sweeeet!!! I have a 55 Special with a 264 and the boat anchor Dynaflow and I just love it, the most relaxing ride in the world. Every time I take her out I come back grinning from ear to ear :D. Have you ever tried to pick up a Dynaflow? If you were to drop it, it would knock the Earth out of orbit...

    I found a 55 Super sitting in a field that had a 322 in it and was able to buy the whole car for very little. It had sat there for years, and the tires were sunk down in the dirt. The car itself was on a moderate slope, and the E Brake didn't work, and I thought it might be a good idea if I could get the regular brakes to pump up before we pulled that tank out of there. I pulled up the floor mat and began to unscrew the cast iron cap to the master cylinder, and my buddy, who was helping me, got right over my left shoulder and about knocked me into the car. Feeling a little uncomfortable that he was so close and behind me (I didn't know he was that way) I turned around to get him to back off and it wasn't my buddy, it was a very large cow who wanted to see what I was doing to her car :eek:. I just kinda crawled into the car and went out the passenger door, that thing outweighed me just a little, and I'm a lover... not a fighter anyways... Turns out the cow liked me, it followed me around all afternoon, I coulda took it home too...

    We pulled the car out and I took it back to the shop and gave the 322 a gas I.V., did just a little work to the ignition, hotwired the starter and actually got that baby to fire up, after it had sat in that field for a VERY long time. It smoked a little (I think everyone smoked in the 50's, didn't they?) so I'll probably rebuild it and maybe put it in the Special... I pulled as many parts as I could and had the rest of the car hauled off for scrap.. there wasn't much left.

    All these links are great... thanks for sharing :)
     
  4. Big Dan
    Joined: Jan 4, 2006
    Posts: 218

    Big Dan
    Member

    Fat Hack..............That my good man is an awesome gathering of NAILHEAD stuff that every NAILHEADER needs to know (did I create a new word)...? DAN
     

  5. Fat Hack
    Joined: Nov 30, 2002
    Posts: 7,709

    Fat Hack
    Member
    from Detroit

    Ha Ha...I suppose so...kinda like NAILHEADOPHILE!!!!:D
     
  6. Mudslinger
    Joined: Aug 3, 2005
    Posts: 1,964

    Mudslinger
    Member

    Sorry for the O/T but what would a decent nailhead 4v with trans from a running car be worth? I have a friend that has one stored away.
    It doesnt run now but he pulled it from a car he was driving and has it stored.
     
  7. Fat Hack
    Joined: Nov 30, 2002
    Posts: 7,709

    Fat Hack
    Member
    from Detroit

    What year and size Nailhead?
    What transmission?
    What kind of Buick is it out of?

    The above info would help folks give you a more accurate estimate.
     
  8. steevil
    Joined: Feb 18, 2004
    Posts: 676

    steevil
    Member

  9. Fat Hack
    Joined: Nov 30, 2002
    Posts: 7,709

    Fat Hack
    Member
    from Detroit

  10. Mudslinger
    Joined: Aug 3, 2005
    Posts: 1,964

    Mudslinger
    Member


    IM not really sure its something like 64-65 Wildcat? Its an automatic. He sin another state so I cant get the info right now IM going from memory.
     
  11. Fat Hack
    Joined: Nov 30, 2002
    Posts: 7,709

    Fat Hack
    Member
    from Detroit

    Here's some more non-HAMB links to help the Nailheadophiles amongst our ranks out:

    (More to come soon!)


    Buicks.Net Nailhead casting numbers:

    http://www.buicks.net/shop/reference/nailhead_casting_numbers.html


    Car Craft's history of the Nailhead:

    http://www.carcraft.com/thehistoryof/65502/

    Nailhead.Org:

    http://www.nailhead.org/poll_archive.php?id=40

    BuickStreet:

    http://www.buickstreet.com/forum/viewforum.php?f=62&sid=47c81bbfe55bd835e7b098258cfb9c4d

    Buicks.Net:

    http://www.autoelf.com/link_in.php?link=292


    V8 Buick's Nailhead forum:

    http://www.v8buick.com/forumdisplay.php?f=9


    Buick Parts Directory:

    http://www.buickpartsdirectory.com/engine.htm


    Vintage Speed's camshafts for 264/322 Nailheads:

    http://www.vintagespeed.com/cams.htm


    TA Performance 364-401-425 camshafts:

    http://www.taperformance.com/nailhead_and_v6_cams.htm


    Speedway Motors 401-425 pistons:

    http://www.speedwaymotors.com/xq/aspx/dept_id.408/display_id.4591/qx/Product.htm
     
  12. TRAVEZ
    Joined: Jan 21, 2005
    Posts: 584

    TRAVEZ
    Member

    great resource man i appreciate it!
     
  13. ChevyGirlRox
    Joined: May 13, 2005
    Posts: 3,491

    ChevyGirlRox
    Member
    from Ohio

    awesome list. mucho appreciated!
     
  14. atch
    Joined: Sep 3, 2002
    Posts: 5,640

    atch
    Member

    i don't know how i missed this when it first came out, but here's a bttt for anyone else who missed it.

    thanx hack!
     
  15. Duration
    Joined: Oct 2, 2006
    Posts: 543

    Duration
    Member
    from Wayne, MI

    i will be reading these links for ages. thanks brother!
     
  16. thurstin
    Joined: Jun 8, 2009
    Posts: 78

    thurstin
    Member

    thanks alot for the links :D
     
  17. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    thanks for doing this.
     
  18. Wicked50
    Joined: Apr 14, 2008
    Posts: 883

    Wicked50
    Member

    These are GREAT!!!!
     
  19. 35mastr
    Joined: Oct 26, 2007
    Posts: 1,899

    35mastr
    Member
    from Norcal

    Also my good freind Russ Martin is a real good source for buick parts. He is also a real good wealth of info.

    www.nailheadbuick.com
     
  20. Thanks for taking the vast amount of time it took to assemble this list.
     
  21. welded78
    Joined: Dec 13, 2010
    Posts: 33

    welded78
    Member
    from ct

    thanks i can see a couple sleepless nights of reading coming awsome colection of info thanks again
     
  22. AntiBling
    Joined: Jul 25, 2004
    Posts: 612

    AntiBling
    Member

    Thanks for this!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.