The Jalopy Journal

kdrodworks316 · 06-03-2012, 07:57 PM

I just got a felt kit for the doors on my 54 chev, it came with all the verticals and the horizontals for the door glass. The horizontals don't have the little clips to attatch them to the door. Does anyone know where I can find them? I've tried national Chevy with no luck.

cederholm · 06-03-2012, 08:10 PM

I don't know, but I'm curious. You might want to check with the ChevyTalk.com guys.

- carl

cheveey57 · 06-03-2012, 08:21 PM

The same thing on my 57. What I did was drill two tiny holes about 1/2 inch apart get a same paperclip bend it to the shape of a staple push it through and twist it in the back. I did that 4 inches or so years ago and it is still perfect.

kdrodworks316 · 06-03-2012, 08:54 PM

I got the staple side figured out, it's on the garnish for the inside. The outside felt needs these little clips that kinda staple themselves to the felt and push into slots in the door.

kdrodworks316 · 07-12-2012, 11:13 PM

Anybody know where I can get some of these lil clips?

06-03-2012, 07:57 PM	#1
kdrodworks316 Grenade Inspector Join Date: Aug 2010 Location: idaho Posts: 195	Window felt help on a 54 Chevy I just got a felt kit for the doors on my 54 chev, it came with all the verticals and the horizontals for the door glass. The horizontals don't have the little clips to attatch them to the door. Does anyone know where I can find them? I've tried national Chevy with no luck.

06-03-2012, 08:10 PM	#2
cederholm Senior Member Join Date: May 2006 Location: Brooklyn NY Posts: 1,025	Re: Window felt help on a 54 Chevy I don't know, but I'm curious. You might want to check with the ChevyTalk.com guys. - carl

06-03-2012, 08:21 PM	#3
cheveey57 Member Join Date: Mar 2010 Location: Long Island NY Posts: 677	Re: Window felt help on a 54 Chevy The same thing on my 57. What I did was drill two tiny holes about 1/2 inch apart get a same paperclip bend it to the shape of a staple push it through and twist it in the back. I did that 4 inches or so years ago and it is still perfect. __________________ . . . . If you're not living on the edge, you're taking up too much space.

06-03-2012, 08:54 PM	#4
kdrodworks316 Grenade Inspector Join Date: Aug 2010 Location: idaho Posts: 195	Re: Window felt help on a 54 Chevy I got the staple side figured out, it's on the garnish for the inside. The outside felt needs these little clips that kinda staple themselves to the felt and push into slots in the door.

07-12-2012, 11:13 PM	#5
kdrodworks316 Grenade Inspector Join Date: Aug 2010 Location: idaho Posts: 195	Re: Window felt help on a 54 Chevy Anybody know where I can get some of these lil clips?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode