|
Welcome to the THE H.A.M.B. forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! |
|
|||||||
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Grenade Inspector
Join Date: Jun 2012
Location: Mansfield, Ohio
Posts: 146
|
Location: Mansfield Ohio Price: $24,000
1930/1931 Ford "Brookville 6" stretch cab Roadster" with laid back windshield built by Steadfast Manufacturing. This truck was mocked up for Goodguys Columbus to showcase one of our Model A chassis. We wanted a truck that would show off our style as well as our chassis' stance. This truck is not complete, but that hard stuff has been taken care of (wheels, tire, stance, and proportions). The selling price was determined by adding up the price of all the parts. You get the labor and Steadfast look for free. Here's a list of what all you get:
Mostly complete roller chassis, full Pete & Jakes suspension: 4" drop I beam, hairpins, disc brakes. 5 inch stretch. 9" Ford rear end with 28 spline axles (No gear), Pete & Jakes rear ladder bars. Frame has brake pedal but no motor or tranny mounts. I didn't want to limit this truck to just a 350/350 combo, so she's ready for your choice of motor and trans. However, the Walker radiator we had in stock is set up for small block Chevy. This truck can be sold with or without certain parts - wheels, tires, radiator, etc. Also note - Steadfast offers stretched Model A frames to accommodate the Brookville stretched cab with a stock-length bed. We're only a phone call away if you have any questions at all! 419-632-3315 or 419-526-3132 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Steadfast Manufacturing www.steadfastmfg.com www.facebook.com/steadfast.mfg 419-526-3132 Last edited by Steadfast mfg; 04-10-2013 at 03:26 PM. Reason: Change in price now at $28,000. due to additional work |
|
|
|
|
|
#2 |
|
Grenade Inspector
Join Date: Jun 2012
Location: Mansfield, Ohio
Posts: 146
|
__________________
Steadfast Manufacturing www.steadfastmfg.com www.facebook.com/steadfast.mfg 419-526-3132 |
|
|
|
|
|
#3 |
|
Grenade Inspector
Join Date: Jun 2012
Location: Mansfield, Ohio
Posts: 146
|
http://
![]() We installed a Lime Works 40Ford column and Lime Works 3 spoke no hole wheel, mounted a Mullins Vega box and hooked everything up. We metal finished the dash and blended it to flow into the doors. We made a flat front floor it will need a tunnel once engine and trans set-up is decided.
__________________
Steadfast Manufacturing www.steadfastmfg.com www.facebook.com/steadfast.mfg 419-526-3132 Last edited by Steadfast mfg; 02-18-2013 at 02:45 PM. Reason: caption photos |
|
|
|
|
|
#4 |
|
Grenade Inspector
Join Date: Jun 2012
Location: Mansfield, Ohio
Posts: 146
|
Please note the price has changed due to additional work to this project....
Change in price is now at $28,000.00
__________________
Steadfast Manufacturing www.steadfastmfg.com www.facebook.com/steadfast.mfg 419-526-3132 |
|
|
|
|
|
#5 |
|
Grenade Inspector
Join Date: Jun 2012
Location: Mansfield, Ohio
Posts: 146
|
bttt
__________________
Steadfast Manufacturing www.steadfastmfg.com www.facebook.com/steadfast.mfg 419-526-3132 |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|