|
Welcome to the THE H.A.M.B. forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! |
|
|||||||
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Grenade Inspector
Join Date: Dec 2007
Location: Ma
Posts: 308
|
Cant seem to find the company that made these . looking to make my A Truck a little safer , by putting indicator lights in the rear. anyone know what lights fit in the top rail holes on the bed?
http://thehotrodcompany.com/images/p...1405par_lg.jpg
|
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Jun 2008
Location: Marshalltown iowa
Posts: 2,494
|
i dont know of anyone making them for the square bed rails
__________________
One hand on the wheel and one on the bottle one foot in the grave the other the throttle !
|
|
|
|
|
|
#3 |
|
Member
Join Date: Dec 2006
Location: pensacola fla
Posts: 606
|
i got sq caps at ace hardware drilled them out and put 3/8 " leds in that i bought at radio shack
|
|
|
|
|
|
#4 |
|
Grenade Inspector
Join Date: Dec 2007
Location: Ma
Posts: 308
|
cool thanks for the idea !
|
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Mar 2010
Location: BHC, AZ
Posts: 2,135
|
I prefer to sink them i deeper into the rails so they are seen when lit up, but not seen parked. Too streetroddy IMO when they are surface mounted,
__________________
Some of you guys are so tight with your money, I bet you can stretch a penny to wire your car. |
|
|
|
|
|
#6 |
|
Member
Join Date: Dec 2006
Location: pensacola fla
Posts: 606
|
how do you sink them deeper in
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|