carb stud size

[jack orchard]

Summit has them in lengths from 1 3/8" to 4 1/4" just a thought....jack

[liljonny]

[QUOTE=squirrel;8084776]235 uses 3/8" carb studs. I don't know what thread the intake you have uses, you probably need to try a coarse thread and see if it screws in (by hand!)

Just found out the dual 1bbl fenton I'm getting is 3/8-16 coarse manifold side. -24 fine carb side.

[bobss396]

Originally Posted by 40FordGuy

A REAL hardware store will have bins of hardware,.... Once you know the sizes,....they'll gladly help you find the correct items. And you don't have to buy a whole package, either.

4TTRUK

Ace is the place... Hardware that is. I dunno about the rest of them, but the one by me was gutted and done over, hardware cases in the aisles now, all quality shti.

They have always had a good assortment of stainless hardware at 1/4 the price of the local boat store.

Bob