The Jalopy Journal

norville · 07-13-2012, 05:38 AM

Well I've given up on this 60 f250 I'm keeping the motor tranny and exhaust. The rest is up for grabs. The long bed is in decent shape. PO placed a wooden deck over the steel floor from the underside it's not too bad. The cab has new rockers and steps but will need some floor work and inner and outer cab corners. The tires and wheels are new 245/75/16's. Great hood, glass and doors. I do have a the title in my name and it goes with the cab. It also has a flaming river power rack and pinion with a tilt column. Rear axle has new brakes and hardware w/4.88's The front clip is decent for a driver but will need a new radiator support. (I've seen these for sale used for $50). A pair of decent late model mustang bucket seats.

I'm thinking $300 for the cab and title.
Doors $300 for the pair with hardware(minus drivers window)
$400 for the wheels and tires?
The bed $350?
$100 for the rear
$300for the front clip
FR universal power rack $350 ford straight axle, rear steer
Flaming River tilt column & wheel sold
seats $100
glass tailgate sold

Make me some offers? I've found a whole new body. That's why I've thrown in the towel. I'm in PA 18707. I'm less than a mile from Engler's antique Junk Yard if you planned to make a day of it getting parts.

Here's a link my photo bucket gallery and the frame is set up for a 351/400M right now. Someone in the past welded in the horns from a later truck. They actually look stock-ish... I may pull them out depending on the timing of things.

http://s201.photobucket.com/albums/a...cpZZ1QQtppZZ24

Front clip is off and so is the bed. The engine will be out this weekend.

norville · 07-15-2012, 12:22 PM

Here's a link my photo bucket gallery and the frame is set up for a 351/400M right now. Someone in the past welded in the horns from a later truck. They actually look stock-ish... I may pull them out depending on the timing of things.

http://s201.photobucket.com/albums/aa25 ... 1QQtppZZ24

Front clip is off and so is the bed. The engine will be out this weekend.

norville · 08-09-2012, 09:55 AM

bump the tilt column is gone. Make me some offers.

07-13-2012, 05:38 AM	#1
norville Newbie Join Date: Mar 2009 Location: mountain top, pa Posts: 90	selling parting out 1960 F250 power rack & tilt Location: pa Price: varies Well I've given up on this 60 f250 I'm keeping the motor tranny and exhaust. The rest is up for grabs. The long bed is in decent shape. PO placed a wooden deck over the steel floor from the underside it's not too bad. The cab has new rockers and steps but will need some floor work and inner and outer cab corners. The tires and wheels are new 245/75/16's. Great hood, glass and doors. I do have a the title in my name and it goes with the cab. It also has a flaming river power rack and pinion with a tilt column. Rear axle has new brakes and hardware w/4.88's The front clip is decent for a driver but will need a new radiator support. (I've seen these for sale used for $50). A pair of decent late model mustang bucket seats. I'm thinking $300 for the cab and title. Doors $300 for the pair with hardware(minus drivers window) $400 for the wheels and tires? The bed $350? $100 for the rear $300for the front clip FR universal power rack $350 ford straight axle, rear steer Flaming River tilt column & wheel sold seats $100 glass tailgate sold Make me some offers? I've found a whole new body. That's why I've thrown in the towel. I'm in PA 18707. I'm less than a mile from Engler's antique Junk Yard if you planned to make a day of it getting parts. Here's a link my photo bucket gallery and the frame is set up for a 351/400M right now. Someone in the past welded in the horns from a later truck. They actually look stock-ish... I may pull them out depending on the timing of things. http://s201.photobucket.com/albums/a...cpZZ1QQtppZZ24 Front clip is off and so is the bed. The engine will be out this weekend. __________________ thanks bob Last edited by norville; 08-09-2012 at 09:55 AM.

07-15-2012, 12:22 PM	#2
norville Newbie Join Date: Mar 2009 Location: mountain top, pa Posts: 90	Re: selling parting out 1960 F250 Here's a link my photo bucket gallery and the frame is set up for a 351/400M right now. Someone in the past welded in the horns from a later truck. They actually look stock-ish... I may pull them out depending on the timing of things. http://s201.photobucket.com/albums/aa25 ... 1QQtppZZ24 Front clip is off and so is the bed. The engine will be out this weekend. __________________ thanks bob Last edited by norville; 07-15-2012 at 12:40 PM.

08-09-2012, 09:55 AM	#3
norville Newbie Join Date: Mar 2009 Location: mountain top, pa Posts: 90	Re: selling parting out 1960 F250 power rack & tilt bump the tilt column is gone. Make me some offers. __________________ thanks bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode