wiring diagram for old chrome clamp on turn signal

any of u guys out there know where i can find out how to wire up an old clamp on chrome turn signal? theres like seven wires coming out of it, and i need to find out what they all do

 

what are the wire colors?

 

Here's how I wire them:

blue - flasher
black - flasher
red - brake light swithch
yellow - left front signal
green - right front signal
brown - right rear signal
orange - left rear signal

 

Signal Stat Model 800:



Model 900, 901, and 910:



Model 902, and 903:



Model 905:

 

its a model- signal stat 900
wire colors are
red
black
green
yellow
blue
grey
grey w/black
red w/green
thank u so much for takin the time to help me out fellas-

 

Only on the Hamb baby!!!!

 

how do you figue out what unit you have? The only numbers on my unit are KD-728, it has 6 wires
black \
flasher
org /
yel- was conn. to grd
wht- was conn to pwr
red- ?
brn- ?
grn- ?

 

mine says SIGNAL STAT 900 right on it. but it seems from the diagrams that the 800 wiring is more like what i have. when in doubt, just start twistin wires together and see what flashes. ha

 

thanks Mr. Zombie!

 

Maybe the 6-wire unit doesn't use the same taillight bulbs for brake and signal. That simplifies the internals of the switch (cheaper!) but you have to add lights out back. Most old farm trucks had switches like that and "Mickey Mouse ear" lights on the roof.

 

Yes, my 6 wire unit came out of a 55 f100, it also has a 4 way flasher button. I guess i'll just have to take it apart and figure it out, shouldn't be that hard.

 

Awesome thread replies! I was given this info years ago and misplaced it, this time I subscribed to the thread!

 

here's one for a 400 I scanned, to add to the thread

 

Anyone have a diagram for a Guide 6004 ?

 

I can't believe this stuff gets me so excited.....................

 

here are a few I've found on here

 

Holy Crap! The first attachment is my unit, any idea who makes it?

 

Sorry I don't, but I did upsize the document so it was easier to read

 

You're welcome... I went through the same thing trying to figure mine out, so when I found the diagrams I kept them handy knowing that someone else somewhere down the line would need it some day.

Glad I could help!

 

the guide 6004 diagram can be found in the 49-52 chevy acc manual -as they were an ad on from the dealer

 

thanks Electrodude, I've already printed it!

 

Guys, I have a turn signal switch with the built in four way flashers. The unit is good and heavy, The only marking is "UA" on the side facing the driver. It has seven wires. The colors are brown, yellow, blue, green, lite pink, black and dark pink (possible faded red ?). If anyone can identify this unit I would appreciate it.

 

good info..

 

subscribed

 

Me too..................

 

boy that is exactly what i was looking for to get my van going... god bless the hamb

 

Anyone have one for a Yankee 960? Mine has 4 wires: green, red, yellow, black.

 

Good timing on this one. I've got two of those units that didn't have any instructions.

Frank

 

mine is original 50 ford has Ford SXTS-B, any diagrams for this one?

 

bump