The Jalopy Journal

srosa707 · 03-19-2010, 03:48 AM

The bellhousing has this on it.

M30:33-X7

srosa707 · 03-19-2010, 03:52 AM

So to identify a 99 block, it should have 99a stamped into the block next to the intake on the driver side?

Fe26 · 03-19-2010, 05:24 AM

If that's a 99A block I'd ask him to use a better lifting chain, the one he's using is a POS.
Good Luck and I hope it is a Merc.

03-19-2010, 03:48 AM	#21
srosa707 Senior Member Join Date: Jun 2005 Location: Orcutt--via NOR*CAL Posts: 1,499	Re: Help with Flathead Identification The bellhousing has this on it. M30:33-X7 __________________ All the cool kids are doing it... http://shiftheadspeed.blogspot.com/

03-19-2010, 03:52 AM	#22
srosa707 Senior Member Join Date: Jun 2005 Location: Orcutt--via NOR*CAL Posts: 1,499	Re: Help with Flathead Identification So to identify a 99 block, it should have 99a stamped into the block next to the intake on the driver side? __________________ All the cool kids are doing it... http://shiftheadspeed.blogspot.com/

03-19-2010, 05:24 AM	#23
Fe26 Member Join Date: Dec 2006 Location: Sydney Australia Posts: 456	Re: Help with Flathead Identification If that's a 99A block I'd ask him to use a better lifting chain, the one he's using is a POS. Good Luck and I hope it is a Merc. __________________ Nothing is more terrible than ignorance in action.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode