|
Welcome to the THE H.A.M.B. forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! |
|
|||||||
 |
|
Thread Tools | Display Modes |
03-17-2010, 11:56 PM
|
#1 |
|
Old School HAMBer
Join Date: Mar 2007
Location: Austin, TX
Posts: 3,401
|
Dumb tranny Question (TH350)
Does the vacuum modulator need to be hooked up to get the tranny to shift? I drove my car around the block for the first time and it goes into gear well it just seemed like it stayed in first the whole time. I didnt really bring the revs up at all and stayed under 25 but was curious anyway. Can you hook it up to just one carb? (I have 4)
|
|
|
|
03-18-2010, 12:25 AM
|
#2 |
|
Grenade Inspector
Join Date: May 2009
Location: chilliwack bc canada
Posts: 109
|
Re: Dumb tranny Question (TH350)
hey there
yes the modulator does need to be hooked up fot the th350 to shift properly usually the vacuum source is right at the manifold but any constant vacuum would be fine (manifold not ported) been followin the build love the car my hats off to ya say hi to mitch |
|
|
|
|
03-18-2010, 12:26 AM
|
#3 |
|
Grenade Inspector
Join Date: May 2009
Location: chilliwack bc canada
Posts: 109
|
Re: Dumb tranny Question (TH350)
oh by the way not a dumb questionat all
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 11:31 AM.