Register now to get rid of these ads!

aluminum valve cover polishing

Discussion in 'The H.A.M.B. O'Dex' started by agtw31, Jul 22, 2011.

  1. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    FLATHEAD INTAKE POLISHING

    $175 PLUS RETURN SHIPPING COST



    i take paypal checks and money orders

    below are my prices:

    $100 diecast valve covers (set)

    $125 sand cast valve covers (set)

    427 SOHC Boss 429 Hemi sand cast valve covers $200 (set)

    $225 intake manifolds(tunnel rams add $100)

    return shipping is not included in my pricing

    i polish other parts contact me for pricing

    614-947-0166 or email me at [email protected]

    [​IMG]

    [​IMG]
     
    Last edited: Feb 3, 2017
    Benny's Ford likes this.
  2. oz07
    Joined: Oct 16, 2008
    Posts: 17

    oz07
    Member
    from Ohio

    I've had him polish a few things for me and really good results. Hard to beat for the price and has really quick turn around.
     
  3. concealledweapon
    Joined: Apr 9, 2011
    Posts: 9

    concealledweapon
    Member

    andy polished my intake did a great job fast turnaround packaged well for shipping
     
  4. Doc.
    Joined: Jul 16, 2005
    Posts: 3,558

    Doc.
    Member Emeritus

    Andy has done several parts for me and they look great. I'm very happy with his work and you will be too.
     

  5. dustdevil
    Joined: Mar 2, 2009
    Posts: 815

    dustdevil
    Member
    from illinois

    Andy polished my intake and valve covers, easy to deal with and great quality!!
     
  6. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]
     
    Last edited: Jul 9, 2015
  7. Wally
    Joined: Jul 5, 2009
    Posts: 284

    Wally
    Member
    from Iowa

    Those Weiand 409 valve covers turned out very nice.
    I wish everyone on the HAMB would have seen what they looked like
    before I sent them to Andy. They looked like they were ready for
    the scrap pile. They had been welded on, sanded down and beat up.
    Andy does great work! Thanks Andy!:D
     
  8. Got my intake (one in pic) back Friday I'm happy as a pig in shit. Great work thanks a million



     
  9. gkgeiger
    Joined: Nov 28, 2007
    Posts: 767

    gkgeiger
    Member

    I'm very pleased with the work Andy did on my intake manifold. He did it on time and as quoted.

    [​IMG]
     
  10. DH9185
    Joined: Mar 17, 2013
    Posts: 94

    DH9185
    Member

    I spent over 100 hours and wasted a lot of good swear words polishing my own TR, only to end up with an adequate result suitable for my "non-show" car. Never again. I highly recommend paying to get it done, and the pics of his work here look awesome.



    Posted using the Full Custom H.A.M.B. App!
     

    Attached Files:

  11. 32rustedinpiece
    Joined: Nov 24, 2005
    Posts: 618

    32rustedinpiece
    Member

    Here is some more evidence of his excellent polishing job on my 1500.00 eddie meyer intake. Thanks again!
     

    Attached Files:

  12. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    what you sent me is what you got back

    that isnt even an intake.it is a carb adapter with jacked up bolt holes

    i don't modify or damage parts,i polish them

    i also refuse to be blackmailed into giving a refund

    the end
     
    Last edited: Mar 17, 2014
  13. gkgeiger
    Joined: Nov 28, 2007
    Posts: 767

    gkgeiger
    Member

    What happened to Jeff is totally unacceptable. I had a similar result but not nearly as bad. My carb. mounting surfaces were distorted but repairable. I gave Andy some constructive criticism and thought he might have learned something. I gave Andy a good recommendation because I wanted to help someone make a living in the car business. I take back my recommendation.
     
  14. tjet
    Joined: Mar 16, 2009
    Posts: 1,335

    tjet
    Member
    1. Early Hemi Tech

    Been using Andy for years for valve covers & intakes...

    These came out really nice...

    [​IMG]
     
  15. real57vetteguy
    Joined: Jan 21, 2014
    Posts: 8

    real57vetteguy
    Member

    :(
     
    Last edited: Sep 1, 2014
  16. louisb
    Joined: Oct 13, 2008
    Posts: 1,126

    louisb
    Member

    Just got my Offy Super Dual back from him and was very happy. I will be sending him more work in the future.

    [​IMG]
    2014-02-03 20.04.04 by louisfbrooks, on Flickr

    --louis
     
  17. clcrown
    Joined: Oct 29, 2012
    Posts: 16

    clcrown
    Member

    Picked up the T Bird valve covers today that Andy polished for me ,he did a great job no complaints here Carl
     
  18. DaPeach
    Joined: Apr 22, 2009
    Posts: 260

    DaPeach
    Member
    from NE OH

    Andy did a great job on my M/Ts. Would definitely use him again.
     
  19. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]
     
    Last edited: Sep 25, 2014
  20. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]


    [​IMG]

    \
     
    Last edited: Sep 10, 2015
  21. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]

    [​IMG]
     
    Last edited: Jan 13, 2015
  22. Rhinelander 1
    Joined: Jan 27, 2015
    Posts: 1

    Rhinelander 1
    Member

    10386268_699053293549711_5593937373703210825_n.jpg
    Andy------Thank-you for a job well polished....You are a very polite fella with fast turn around....

    Brad Knoll Rhinelander Wi.
     
    Stephen Barrett likes this.
  23. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

  24. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

  25. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]
     
    Last edited: Apr 30, 2015
  26. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]
     
    Last edited: Jun 15, 2015
  27. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

  28. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG][​IMG]
     
    Last edited: Jul 28, 2015
  29. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

    [​IMG]
     
    Last edited: Aug 7, 2015
  30. agtw31
    Joined: Apr 27, 2009
    Posts: 362

    agtw31
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.