4.71 need some help

Hello ,I would like to defuse my 4.71 to polish the body, there is some precautions to take to defuse it ?

 

Looking good
Take some pictures while taking it appart!
Note: there are some shims that are very important that you don't mess around with. Do a search here, and you wil brobably find more details.

....................................
Taildragger&fenderless

 

Ok thank you if there is someone who can help me ! I'm going to see at the tech archive

 

I don't find anything in the tech archive I'm very need some help please

 

The word you want instead of "defuse" is "disassemble"

http://www.jalopyjournal.com/forum/showthread.php?t=367403

tells how to put it back together, and a little bit about how to disassemble it at the very beginning.

 

Just stack everything in the order it comes apart. Make sure you get any shims back in the same place that they came from. Take pictures if you have to.

Its not going to come spoinging apart like a snake in a peanut bottle.

 

The most imporant part of disassembly is probably pulling the gears off, you need to use two pullers, and pull them both at the same time.

 

Ok thank's do you have some pics of the pullers ?

 

I made two puller out of 2 pc of 1/2" flat bar. 3 holes. 2 to fit the gear bolts. 1 in the center i welded on a big nut, i think it was 1/2" UNC.
Use a center bolt, slowly tighten, same with the other, back and forth.
Hope this make any sence
Probably someone else has a better intruction.

.......................................
Taildragger&fenderless

 

google for: disassemble 6-71 blower
disassemble 4-71 blower

Also see: http://www.jalopyjournal.com/forum/showthread.php?t=367403

 

Proper nomenclature is key when doing searches.

Search on 4-71, not 4.71.

 

Punctuation matters in google searches...but not in ebay searches

 

Look where the OP is posting from. We all seem to understand what he ment.

bobo1, OP means original poster. Meaning you

 

They use different punctuation over there, it helps to let him know how to find the info he is looking for.

 

We did, but the HAMB search function, and Google, will not.

Je voulais dire aucune infraction. J'essaie simplement de vous aider.

 

Believe me I know. My parents are from Belgium, the southern part that speaks French.

 

And I was only offering help as well

 

Very thank you for your help , I'm going to see here :http://www.jalopyjournal.com/forum/s...d.php?t=367403
There 's a lot of information who I need .
Sorry for my punctuation , if there is someone who speak french it can help me

 

Essayez ceci.

http://translate.google.com/transla...orum/showthread.php?t=629442&highlight=367403

Google translate est votre ami!

Vous pouvez avoir des pages entières traduits. Il suffit de taper o collez l'adresse de page dans la boîte, et sélectionnez la langue.

 

Try this, hey that's damn cool Gimpy

 

Damned fast too!

 

all those poor naked detroit diesels...

 

je vous remercie beaucoup , votre français est très bon , moi mon anglais est vraiment très très moyen merci beaucoup de votre aide

 

Vous etes les bienvenus.

 

I was wondering if it was just me on the defuse/disassemble thing

 

Yes you are right , I would like to disassemble it thank's for your link

 

merci beaucoup , votre gentillesse me touche beaucoup , si j'ai beusoin d'aide , puis je faire appelle a vous et a votre Français merveilleusement bien parlé .