The Jalopy Journal
A little reading say’s the rubber insert is used with full wheel covers. It helps keep dust from collecting within the face of the wheel and...
No, not factory. But 57 did go to window less wheels.
There’s those purists out there that will say it’s crappy. :)
^^^^^ Wait, What! [ATTACH]
Don’t use provided Model T crack handle. :)
I like the basic set up over the Deluxe.
Welcome to the HAMB. Where Cross-pollination is alway’s met with mixed result’s. Carry on and let nature do it’s thing.
Lot’s of old stock “Delco Moraine” on eBay that match up better visually. Trouble is non of them make any reference to application.
No clue if this is correct. Just doing some eye ball matching and I found a list from Amazon then went to Rockauto. [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH]
“Here come old flat-top, he come grooving up slowly”
I also was thinking 56 Chevy. However, if the floor tiles are 12”x12” the scale of peak would make it out of scale.
Blow them out with air only and use a fuel filter or replace the fuel line completely,
“Don’t shoot!”, just my take is all. Digging the open frame rails over filler panels.[ATTACH] [ATTACH] Really like the aluminum filler in the...
You’re not alone. Been out of the garage for some time now dealing with father in-law so my other can go about life and work. Which isn’t as bad...
Just what you said. Make a custom bracket on the engine to locate pivot ball where it needs to be so Buick clutch linkage (equalizer included)...
A little info here https://www.jalopyjournal.com/forum/threads/knuckled-valve-covers.193675/
^^^^^ Forgot to add water. :)
Forgot to mention. I had percolating of fuel post fuel pump. Something to look for with…[ATTACH] Once I knew all was doing well again I...
That describes what I was experiencing.
There’s also universal covers with no cut out.
There are other GM engines with starters on the driver side. Here’s one of them....
Some kits online are indicating starter location for either side and of the hose the dowels are not in place. Is the adapter capable of being...
Take it to the next level. Universal to fit any carb. [ATTACH]
Were the dowel pins already pressed into the adapter for the GM trans?
“drive away” as in accelerator shot is weak or not there?
Carter M6900 made a huge difference in the red 56. So much so I’ll be doing away with the electric fuel pump and this set up in the 57...
Rear AC bracket.[ATTACH]
Or you grind your own.[ATTACH]
Separate names with a comma.