The Jalopy Journal
The spindles could be Granada spindles. A cheap disc brake conversion used the disc setup from a Granada-you could have the ball joint openings...
Dealer trade ins in Ohio do not count-looked it up a couple of years ago. They don't want the dealers to loose out on a sale. But the state does...
Selling in the Red field by the stadium, RSA 28-29. Been going for about 10 years-selling for the last 3 years. 6 hour drive-There are 4 of us...
I put a 1975 302 in my '50 F-1 pickup-had the same problem. I bought a early '65-66 Mustang radiator off ebay. I found a remanufactured 3 core...
They had a booth at the PPG Nationals in Columbus, Ohio in early July. Had a young man running the booth. This is NSRA Nats weekend so maybe they...
#2 awesome truck!
Congrads! Enjoy your retirement-I retired 5 years ago after 33 years in Fire/EMS. You may not miss the job-but you will miss the guys! Thank you...
Nice mixture of cars! Love all the utes. Thanks for posting
[ATTACH] Here's a rusty '36 Ford Coupe body-SOLD! Plwase delete-I can't seem to delete this thread
You need to do a compression check. I'm thinking burnt or bent valve-or maybe a bad lifter or cam lobe. alex
Finally remembered to measure the seat-too much going on the past couple of days. Bottom of seat 61 1/2 inches wide, 20 inches deep, but after top...
If the measurements do not show up tonite-I'll get them for you in morning off my '63 fastback. alex
I just cleaned the shop and storage room last week - 8 homemade stands from Model T axle housings (4 short-4 tall) plus 10 heavy duty adjustable...
Will be there selling parts with a couple of friends plus walking around looking at all the stuff you can only see at Hershey! In the Red Field by...
You only have to turn the bolt a half turn or so.
The bolts have an eccentric on the inside of the backing plate. You turn the bolt to move the brakes out to contact the drum. I forget which...
I just rebuilt a 9 inch for my F-1. The shop that went thru the pumpkin advised me I did not have to use the copper washers. Just use RTV (gear...
Gonna zip down on Friday with a friend as spectators. Have not been to the Nats for about 20 years!
I'll be there all weekend selling parts in the swap area. Plus hauled in an early race car-old number 96. Stop by and rest your feet. Supposed to...
Get your car up solidly on jackstands. Remove tires, brake drums and backing plates. Remove the tie rod-unbolt and whack the spindle by the tierod...
Looks awesome! Just needs another carb on that flattie--
looks like Saturday for me-weather permitting!
I've attended a few times in the past-great swap meet! Plan on hitting it this year. alex
It has been three years since I was there-but they usually have a great swap meet. I'm planning on being there Friday.
Thanks-sent you a PM
'32 Chevy grill & stoneguard for the same!
I have stayed in Elizabethtown for the last three years. Rented a cabin at the KOA just outside of town. We rent a three bed cabin and split the...
I'll be selling parts in the swap meet area. I just hope the weather cooler than last year! It's always an awesome show and large turnout. If the...
I got glass for my '31 Model A from Chris-great job! Awesome service and great product at a decent price. Plus he shipped it in a nice wooden box...
You have to modify the floor a little bit and cut out for the rear crossmember. You can use a riser hump from Tudor sedans or 4 door sedans. I...
Separate names with a comma.