The Jalopy Journal
Don't jinx it!
About another case of Arnold Palmers and you'll have it. ;)
You may have said, but what single stage paint did you use for your wheels and other various parts?
Looks great, the paint really changes a lot from the shade to the sun.
Thanks for the info, great build so far. I also know how hard it is to do with kids around and using up every spare 10 minutes you get here and there.
What was the specifics on your coil overs...make and spring rate? You might have said, but I don't think so. I also hate when people call my coupe...
[ATTACH] [ATTACH]
Just spectating, the weather forecast seems to change every hour.
The patio cushion pattern kinda looks right after you look at it long enough.
I have taken a standard SBC intake and elongated the two center holes to fit 1987 to 1995 center bolt heads. It works, but it is not perfect if...
Yeah, I think I used a 168 tooth flywheel. It's been 10 years ago now, so my memory is foggy. I have 3.73 gears...but, I have 750-16 firestone's...
I cut 1/2" off of the input shaft and extend the input splines by 1/2" when I put an 4 cylinder S-10 T5 behind an SBC. I extended the splines...
Thanks, epay shows a few 14014416 heads and some come up as Mercruiser which is odd because I have an old 305 Mercuiser engine. I wonder if there...
Is there a specific casting # identifying a 305 HO head?
Rust Holes Gone.....Poof....can you buy that in an aerosol? I'll take a couple of cases.
Is the bead below the 1/4 window from the sedan or fabricated?
When you chop the wood in the pillars, is it glued back together at some point or does it matter if it's not?
Are you using cut off nails to hold up all of the tools on the tool wall? It looks pretty cool.
I went and had a good time. We visited a gas pump restoration shrine in Crawfordsville, IN. It showcased a pretty large collection of restored...
This is a great thread. I just wanted to comment that I plugged my heater hose outlet on my Zips riser without issue. I did install GM OE part...
I'm not emotional about the tag, but I think the artwork is great. If you aren't familiar with the Eddie Miller Streamliner it's a cool story and...
http://www.jalopyjournal.com/forum/threads/model-a-3w-coupe-build-up-pics-inside.432856/page-9 I thought this one was well done.
I'd like to imagine it's a place where neked women dance around bringing you drinks all day.
The level of detail on you bull nose is probably the main issue with this technique. But, I remember reading where a guy had brushed Crisco...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] A few pics I've saved over the years.
It's probably going to start with a heavy jacket and a poncho.
What alchemy said, haha.... To your original question, if the worm gear is bad that is a little more of a pain. My worm gear had a chunk missing...
I don't think Lubriplate 105 has a weight rating as it's intended for a short start up. I beleive the original oil was 600W, you'll find several...
This one? I think it was Nobodys Hero
Remember this guy from the campground? He crashed into a golf cart. The state police came and picked him up and left that quick. It was like a...
Separate names with a comma.