The Jalopy Journal
propane, good 4 startin forest fires. looks better at night
how 'bout using two 90;s and a clear hose close to the bottom of the tank.
fuel tank might need to be seen about, as far as breakfree lube, atf/acitone 50/50, let sit a couple days
press
you need to puta wrench in your daughter's hand and get busy showing her what makes daddy stay in the shop all the time.
you could always use the heat and shrink method.
that is what AMERICA is made from. True Craftsmanship!!!!!!!!!!1
looks to me like you have a rod tweaked to the left/right i would check wristpin bushing/ rod bent for wear like that. look at the top ring...
those look like Dodge D24 fenders. mine 's a '47
try the local wheelchair shop. they use gel type battery's replace them once a year and leave the old ones behind. i'm still running them both in...
better yet, try going down to the local disability/wheelchair shop. my late sister in law had a semi new chair that they came once a year to...
i never met the man but back in the 70's when i was in the antique motorcycle scene whenever anybody saw him at the swap meets like ohio or hershy...
by lookin at those pic, i got the same on my 51 pickup. mine came out from under a 77 malibu, the same place i got the motor im runnin. complete...
Don't forget acetone/atf, 50/50 mix, can't beat that with store bought brands.
down here we call em hillbilly rims
isn't it true that whatever temp thermostat you run just opens at that temp , then picks up about 20, 30 degrees from there. i have a 160...
Back in the 70's I watched Mr. Hine's, the local salvage man for the neighborhood come by to scrap out a 59' caddy. His tailor was to small so he...
10/4 i'm with plym 46
seems to me that my shop teacher told me that in afganistain the "machinest'" was givin a 3" cube of metal and told to file down to within .002 (...
took out #1 plug and rotated motor until it came up to TDC, at TDC the mark on the H balancer was on 0.
I've posted a few times about trying to figure out why my SBC 400 was twisting off the starter bendix. since i put this motor togeather this has...
back in '69 traded out work for a 65 GTO w/a blown up 389 in it for a extended wiring/cable job on his new honda 350. car had a rag top, factory...
I've got one made by champion that i use all the time. take a compression check of the motor your working on, set compression on plug machine,...
yesterday i went to napa for 3/16 brake line and they had this dark green , almost black brake tubing that they said will not kink or crimp when...
after you get it all back togeather, i would static time it for sure or possibly have the same thing happen. i went thru 3 starter bendix before i...
Family, it dosen't get any better than that!
2"-3" lowering kit from advance auto and some sheet metal from local friend/yard and that should keep ya busy for awhile for less than $50.00
Yea, but that 3'' is to the frame bumper or cushin. i could remove that, stay with the 3" and still have enough?
I drive a 47 Dodge D-24 as a daily driver. was under her the other nite and remembered that i welded the spring shackles under the rear axle. ok,...
pull valve cover off, remove plugs,rotate motor in direction of rotation till INTAKE valve opens then closes. when valve is approching closed,...
Separate names with a comma.