The Jalopy Journal
I found out EMJ has minimum purchase and Ryerson was $120 . But I can`t get them to price what I`m looking for . ERW tubing is what I`m looking...
If anybody knows of a place I can get about 6 to 8 20' sticks of roll bar tubing reasonably price . Need it to be within driving range of...
Yes, we finally got it finished last fall. But didn’t get to run it cause of my bad right knee. We have been fighting with the stack injectors to...
Fresh from having MSD "5/21/2018" service All checked OK With Pro Power Coil $300.00 plus shipping from Tulsa OK 74128
To add one more ,here is my gasser I`m building to race . We`ll be out this season trying it out,
Got a little progress over the weekend . Finally got the trunk deck to fit and pinned down. Only had to split in 2 pieces and take an quarter inch...
Well the tubs are in and got the drivers side fender trimmed and mounted. Just have to trim the other side to match and mount it. Then start on...
Well we finally got the doors hung. We pushed it outside to clean the shop and get it on the lift . That way we can square the suspension and fit...
Circle Racing ,both Speedway and Summit sell them. The plus of Summit selling them is the free freight.
Yes, there is quite a bit of progress. Just haven`t had any extra time to be on the HAMB or the other sites I`m a member of. I`ve got the body...
Jacob, welcome from Tulsa ,Gasserman
Well we got the front end fit up and mounted. Went over the chassis and looked to see if we had forgot to mock up anything . Got to do a little...
Well after pricing the quick latch pins ,I just went with Dzus fasteners . They will work just as good and were about the third the price of the...
Progress has been slow with the holidays . But it`s still moving forward. Got the mid plate mount ,driveshaft loop and the front end mount tacked...
Here`s some pic`s of my 3 gassers .The Falcon was sold earlier this year to build the `33 Willys ,but the `48 Austin is my street gasser.
Welcome from Tulsa, Gasserman
welcome from Tulsa, Gasserman
We didn`t get as much done as we hoped we would. We both have been sick, but we did get a little bit done. Got the dash on hinged mount to be able...
What is not in the current photos is the dead perch for the drivers side spring . That keeps everything in place and you don`t need a panhard...
Here`s todays photo update.
We got some more progress done, FTF has been fighting a bad ear infection since the day before Thanksgiving . And with the welder is out ,the...
Been kind of busy . Got the brake pedal ,master cyl. and pedal rod all fitted up ,also got the lower steering mount done and seat mount fit up ....
It starting to look more like car . We got steering ,seat and shifter mounts all made up and installed. Still a long way to go.
FTF has always said if I`m cut ,I`d bleed blue. By the way that`s a nice bedspead.
Speak for your self big boy. I`m not a day over 30 . Or at least my mind isn`t , but the body generally tells a different story. Got Roger`s Nova...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Made a little progress today. Got the fuel tanks fabbed up and installed. And got started on the staeering box...
Here`s a little example of FTF `s welding , plus todays progress. Hope you enjoy it like we have enjoyed building so far.
My Dear friend "FTF" has been great about helping me get the car this far. We still have alot to do , but it`s going together fast then I thought...
Separate names with a comma.