The Jalopy Journal
Your add said it is a FIBERGLASS body,,,,,,,,,fiberglass has no grounding aspects that you would need to make lights work,,,,,so they feedback...
Hi I used a 91 Lincoln town car front sub has power steering disc brakes heavy sway bar and the Lincoln has a roller bearing in the floor for the...
try 91 Lincoln town car
3.8 ford v6 from a t-bird,,,,had one I put in a ford ranger with an Lincoln automativ overdrive and it is not a y-block just a 45 degree v-block
First things first,,,keep it simple and check dist. cap for cracks and carbon tracks which look like cracks,,,,,this will easily cause the same...
I got this info out of my first Jahns catalog and never forgot it Bore x Bore x Stroke x .785 x number of cylinders= cu.in
This 51 was going to be a slight mod rebuild with a 302,,,Because of you it became my first chop,,,complete build,,,very little money invested...
Always used many fuel filters on street driven Holley's,,,,,,switched to AFB type Edelbrock for street use,,,,much easier to keep in tune and much...
91 lincoln town car 4.6 SOHC fuel injected,,,AOD,,,3:50 posi 9in,,,,bought the whole car,,,used the front suspension so I have front disc and...
Try Smokin'Joe here on the hamb,,,,,,he rebuilds them and has a ton of parts and buys parts and whole transmissions.....
Used in WW2 to patch bullet holes in aircraft......
Junk yard,,,,ford crown vicks used to be police cars have a nice heavy duty factory trans cooler in them,,,I run one in my 51 with no problems and...
Got a 1949 to 1959 Chilton from my uncle jimmy 45 years ago,,,still have it,,still use it,,all there and needs rebinding,,,,amazing what is in...
Sounds like you are going to need a driveshaft soon and some other help,I have a Chiltons 1949 to 1959 that shows everything you need to start...
Dude......man use a dual master with a porportioning valve so if you loose a line or hose you will still have some sort of braking power,,,,,the...
Ford made a C5 THAT WAS A c4 WITH A LOCK UP torque converter which gave a direct drive with no slipage,,,if you put a shift kit in it it would...
I used THE TITLE MAN 585-232-3217 got all the paper work needed and on the road with no problems and about $250 in April of 2010
Been doin this since 1967,,,a good friend showed me how with a hacksaw and a piece of thick paper to wrap around the tube for a straight cut and a...
Generally older engines like the 390 I am running in my F350 car hauler that pull a lot of weight will heat the exhaust seats and burn them...
As long as you remember him there is no real loss for he will always be in your heart
For street use I would use a Edelbrock carb,,,I have a 406 tripower motor I just got,,,not running yet,,,I also use a 390 in my F350 car hauler...
I am pretty sure the F is a field wire and in order to charge you have to power the field with 12V from the ignition switch,,,,,but if you hook...
Try this guy STACY BROWN ANTIQUE AUTO SUPPLY Arlington Texas 817-275-2381 He found me main bearings for a 337 Ford flathead....
If you run the mig wire through a 4" piece of brake line tubing bent in this shape [~ ]using a drill to spin and pull it through it will...
Are you sure you have the right waterpump, the newer ones turn backwards, and the fans also run backwards and would push air forward instead of...
With the Hei the plugs should be around .045 gap,,,305 heads have the small plugs so go to the auto store and get a set of plugs that fit the...
If your Ground is at a waterpump bolt change it to an engine block mount,,,,waterpump bolts do not make good grounds...
Don't forget the beer for the frig,,,,lots of beer!!!!!
Try this guy,,,he does magic on oil pumps,,,Precision Oil Pumps,,,,559-325-3553 he is in Clovis CA,,,,,,Blueprinted oil pumps....
Captain Lee"s from Master Series will desolve any surface rust and leave a coating of zinc chromate,,,,Have body parts in storage for years,,,,no...
Separate names with a comma.