The Jalopy Journal
Hopefully the bictures show, but here is a few construction pics. I definitely didnt take enough
[ATTACH] [ATTACH] Maybe this is cheating, but this is my favourite, owned and built by myself. Extended quarters, 5 on the bottom, 2 and a half on...
Thanks canada Jeff! Dee_soto <3 <3! Come check it out any time! I'm going to try and debut at the Calgary world of wheels
Thank you straykatkustoms. Loveoftiki, where I am caroming is expensive, it cost around $700.00. Plus about $150.00 in material to make them. The...
Thanks Chadillac! I would love to Post bigger pictures, but I am pretty techno illiterate, wierd considering I'm 33.....
[ATTACH]
I get asked alot about my lake pipes. I also wanted to add where I got them from. Well, I didnt get them from anywhere except the parts store, a...
Thanks Fat47! I also want to add a few other things I did. I brought the body back down to bare metal. I didnt complete alot of rust repair my...
It has been quite some time since I have posted here. I thought that since I had some extra time, I would stop by and show off what has been going...
I used a dual filament bulb, an 1157. I used a bulb holder with serrations all the way around. I made a piece shaped to fit the back of the bumper...
Thanks, that was a big help!
Any one replaced front brakes on an Edsel?
Hello folks. I am needing to replace the front brakes on my 1959 Edsel Ranger. I am having trouble finding information and a supplier for the...
very cool video! Good music good pics, I thought the speed was good, although I have adult ADHD BTW, I love how closely the picture cycle was...
That looks awesome! If you have the full quarter like that weld them in, it would look so sweet with extended quarters!
Nice job! My grandpa and I did almost the exact same thing as you! our firewall is very similar, but we used the original floor and welded the...
magnamachineworks
Now that you know where the new shop is you could come by.....................????
OK, Thanks! It seems to be a little bit cracked or shattered looking above the rear fender on the drivers side and a little bit on the rear...
Some very interesting information here! Thank you guys for keeping this thread alive!
Seems these links do not work, thank you though, I will try and do a search
maybe I missed it but how can we get a copy of the book aside from GNRS? Will you have it available for sale here on the HAMB? Will it be...
fenders are the same except on 51-52 has a raised area where the "horseshoes" bolt to, I am not as familiar with a 49-50 but I believe there is a...
Sure did! Thank you! Should I sand down the bad spots to the bottom and leave the rest or should remove all the old stuff I sprayed on there?
thank you
It rides better with the cut springs but aalso put a spacer in the packet and lowered it, I should say spring bind not coild bind (a wave like...
Thank you
kinda to clear things up it sometimes does a bang jerky thing if I let the clutch out too hard, I was thinking it was the leafs, maybe worn out 60...
Its time for me to do my rear suspension righ, currently I have 4 inch lowering blocks I made on sagged out leafs with worn out bushings, in my 51...
Thanks! I will wire it before the resistor and try it again
Separate names with a comma.