The Jalopy Journal
anyone else got a picture of 2x2 progressive holley 94 setup?????cheers adrian
can anyone post a picture of what twin holley 94's look like with a progressive linkage fitted???????thanks adrian
can anyone cross reference this 2244p with speed pro?is it the same as 345np30???cheers adrian
can anyone tell where i may get 1 or a set of 350 pistons part number 2244p with 4 recesses,thanks adrian
ok have got it going today front float level 2miles to high set that and bugger me dead up she fired(also has secondary problem but he will have...
have tryed dissy in both ways (firing 1 or 6 still no joy)
yes have already drianed the oil after i decided that it must have past the rings ,no not marine carby?it was on the old engine working fine????
its 600cfm holley but its flooding all the time???no point cleaning plugs till sort that out over fueling and it has mechanical fuel pump????
hay mate,yes i fitted the hei dissy,yes have spark,yes brand new goodwreach 290hp crate motor not rebuilt??????
ok went back over today,was looking in a book and i had been setting timing at 0 degrees -my book said set at 8 degrees btdc did this and still no...
thanks opel i will let you know tomorrow cheers adrain
yes inlet opens lets fuel in the closes compression start at this stage boths valve closed as piston reaches tdc sparks forcing piston...
engine is a brand new goodwrech 290hp engine,it does have compression just lacks the spark timing,will pull the cover off tomorrow look after...
if the dissy is 180 out -i would think that i wouldnt have compression on no1???or am i missing something?????
well got the new hei in the engine today and sh-t it still wont start???crank engine over with no1 plug out starts to compress use a piece of wire...
yeh i had 010 350 with point delco remy and the put hei what a difference,do you have pro comp stuff over ther hasnt got a good name here,cheers...
ok have been over playing and it seems????that sh-ty twin point dissy is the problem,both sets of point dont spark all the time,this set sometimes...
yes right hand rotation
yes it is pointing to 1,i just put 1 anywhere and start the firing order from there thats ok isnt it?????????
no not pop doesnt mater what i do with dissy it doesnt load up when you advance it,i pulled the 1 plug out cranked ill it started to come up on...
tell me what you mean by static timed,firing order 18436572,cheers adrian
Separate names with a comma.
The Jalopy Journal
