The Jalopy Journal
[ATTACH]Our daughter cleaning my Catalina.
[ATTACH] Dual Carter Competition 500s on my 428.
The overflow bottle is 11” tall ( to the top of the cap) and 4 1/2” diameter. My brother found it at an estate sale. Here is a picture of the...
Air cleaners are (were) 4 7/32” reproduction Corvette and SD Pontiac. Carbs are Carter 500s which are 5 1/8”, so my brother trimmed the bases...
A “new” old coolant overflow bottle was added and my son-in-law spent a lot of time over the Thanksgiving and Christmas holidays getting the...
Did not want to weld shut the holes for the fender bolts so I made covers with studs on the back to hold them on. I also built a battery...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
“big block” Pontiac! Where did that even come from???
[ATTACH] [ATTACH] 1931 Pontiac with ‘55 DeSoto gauges.
[ATTACH]
Not done yet unfortunately. These pictures are in its current state. Getting close to blowing it apart for paint. I have a build thread about it...
brokedownbiker, Those 2 brackets do belong to your car, they [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] are rear body mounts. Here...
Mine is neither a ‘32 or a Ford, but it is in primer. Get well soon HRP !![ATTACH][ATTACH]
[ATTACH] [ATTACH] I used a piece of copper water pipe for a battery cable guide under the toeboard and a piece of aluminum tubing from a folding...
[ATTACH] Dad’s ‘50 Pontiac at my grandfathers gas station. He followed up with more Pontiacs, a ‘57, 2 ‘59 Catalina’s, a ‘60 Catalina, a ‘62...
1930 and 1931 Oaklands had the flathead V8 available. This car appears to have it judging by pictures from a previous post. It also has the...
A friend got me a theatre lobby poster soon after the movie was released. I guess it’s time to frame it and hang it somewhere.[ATTACH]
[ATTACH] RIP Jim Wangers
I did exactly what the OP was inquiring about. I bought the ECI offset swinging brake pedal setup with 9” booster. I also didn’t want to look at...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I received the new gas tank and even though the dimensions matched my original tank it didn’t fit...
The original frame is boxed and an “X” from Chassis Engineering for a ‘32 Ford was added. Sorry, not trying to hijack this thread, just...
It has a wood framed body. I used a complete wood kit from autowood.net to replace mine. Doors are also [ATTACH] [ATTACH] framed in wood and...
1931 Pontiac [ATTACH]
Separate names with a comma.
The Jalopy Journal
