The Jalopy Journal
Several years ago I installed an Easy Street Kit from Air Lift on my 51 Chevy. I purchased that kit from a member here. I now find myself needing...
Many of those were the ones I found when I did a search but I was hoping someone might have some newer photos as some of the links photos are not...
A couple of years ago I bagged the stock front end on my 51 Chevy with the help of a thread by Rustypipes and tech support from Gambino and...
I do have an airbrush that I got as a door price, but I' have never used it. I just might try that first. The worst that could happen is I will...
Is there any best primer/sealer to use? Can you explain "using a blender to mate new clear to old"?
The pearl is just in the base. Unfortunately, the scratch is just on the quarter right where the gas filler door would normally be (filler door...
While working around the shop today I had a piece of sheet metal fall over on the rear quarter of my 51 Chevy. I got a 2" scratch all the way...
I found a pair of these in a box in the shop. Can anyone tell me what they are from and their worth? [IMG] [IMG]
Here is the best tool for removing and installing hood springs. I've used these for many a hood spring. Hood Spring Removal Tool. This site...
I bought my 51 from a guy in Indianna. I just took that title to the IL DMV and got a new IL title in my name. Easy.
I just drilled mine out and used the ball peen on the new ones.
The stock steering uses a kingpin on the 3rd arm. The corvette uses a bearing. The steering is tighter and smoother.
That's how the 53-62 Vettes were. They used the same front end as the 49-54 cars.
Can't put a bump stop back in as that area was cut out for the bag. I have disk brakes from Buffalo that require the dropped spindles. This is...
Now the first thing I'm sure many are saying is "car can't sit too low!" but hear me out. My car is a 51 Chevy. I bagged the stock front end...
I've used Rebel for my 2 projects. Great product and even better support.
In my 51 Chevy, I have a 56 Chevy rear end behind my 235 with a 5 speed. Right now I have a 3.55 gear but was wondering about changing to a 3.08...
What are you painting with? I have a grill at Advanced but I thought they completely strip the piece before they plate it.
Has anyone used this type of pilot bushing?
So I have read all the T5 links and still am confused. I posted a video of my clutch noise and the consensus was that it was the pilot bushing....
I have an adapter plate from Buffalo Enterprises that is supposed to take that extra space so the tip does not need to be cut back. I did not,...
That was a new bushing 500 miles ago...I would think it should last longer than that.
After getting my 51 Chevy on the road and after driving it around for several months, I've developed an intermittent clutch grinding noise. I have...
I got some new lug nuts with a slight shoulder on them and mine are tight. I got the nuts from Advance Auto part #98903.1
New throw out bearing and pilot bearing.
It's most noticeable at lower speeds but I'm pretty sure it is doing it at higher speeds but the pipes cover it up. If it was the rear end,...
I have a whine sound that I believe is coming from my trans. Is it normal for them to whine? It's filled with fluid and seems to fun fine, but...
I googled the one that Mr48Chev posted and my local AutoZone had one on the shelf for $13. I installed it today and I got tunes, good AM for the...
How does this one work for AM reception?
Separate names with a comma.
The Jalopy Journal
