The Jalopy Journal
Bttt!!! Posted using the Full Custom H.A.M.B. App!
Bttt!! Posted using the Full Custom H.A.M.B. App!
[ATTACH] 1949 Chevrolet Styleline Deluxe-2100-Hot Rod-Cruiser-4 dr Engine-GM 350 Crate ZZ4-with Aluminum heads and Intake- Edelbrock 4bbl...
Pops and I will be there! -dd Posted using the Full Custom H.A.M.B. App!
Does anyone happen to know who has the Almquist patterns, if they still exist?-dd Posted using the Full Custom H.A.M.B. App!
Ive actually looked into this for the 352 motors and the main problem isn't finding an adapter, it's finding the Packard bellhousing, clutch and...
Sounds like it is connected to ported vacuum, not manifold. The needle should be reading the opposite. Check a different port on the manifold or...
When racing with non safety glass, you have to tape the glass so if it breaks it won't go all over the track, or in this case people. Most of the...
As other people have said, your best bet is to pull the pan, pickup, and tappet cover. That sludge can completly destroy a motor if you're not...
Very sorry to hear about Don Kendalls passing. My condolences to his family. That car is an awesome piece of engineering and a real hallmark of...
Pops and I plan on going down. Always good stuff down there.-dd Posted using the Full Custom H.A.M.B. App!
Beautiful!-dd Posted using the Full Custom H.A.M.B. App!
Ive got this one on my truck. Cut off the knob that was on it and put a shifter knob on it. I like it, makes parking a whole lot easier. -dd...
Just to confuse things further, the same Packard v8 was used in full size Nash Ambassadors in 55 and the first half of 56. After that, they came...
Very cool. Gives me all kinds of ideas for some flat sixes I've got around. Where did you get those su adapters? Or are those some more custom...
Very cool looking car. Love those!-dd Posted using the Full Custom H.A.M.B. App!
First thing I thought of was a Corvair van. The side door would be simple enough to convert to a ramp or similar set up. If it was bagged, it...
The Y stands for the shape of the block. It has a deep lower block skirting designed for strength. Of all the supposed problems the Y block had,...
X3 They know their stuff! There's nothing wrong with the early motors if your building a cruiser. If your wanting a power motor, the later truck...
It would be better to open a new thread on your topic. However, the problem you are having is probably just an issue with the kickdown linkage...
Might as well toss mine up here. 61 Lakewood with 64 110 engine, and rear suspension. I've also got a 60 coupe that I plan to make into a...
Here's mine. Posted using the Full Custom H.A.M.B. App!
Thats a good thread with a lot of good info. I would start by dissembling your rocker shafts and cleaning them up. I would also check your rockers...
I've stil got the original yblock in my truck. It's done me good service over the years, so no need to change it. It's going to be getting a...
Give them a call. They make all of their tanks on site and can give you a quote. I know its not on their site, but its in their catalog. -dd...
Hate to state the obvious, but Moon will make any size you want with whatever threaded bungs you need already installed. I know Speedway has some...
A vacuum leak in the base gasket will defiantly cause a too rich mixture. Check the gasket and re torque. Then re torque again. But the next...
They never made the wagons in the late model body. Only in 61 and half of 62. Mines an automatic, but the previous owner updated it to a 64...
I've run a pertronix point replacement and coil on the yblock in my 58 truck daily for close to five years now. Hasn't let me down yet. I haven't...
Subscribed. Defiantly like the different look of them. A valley pan would look great too. I second the filler tube and pcv valve baffle and hole...
Separate names with a comma.
The Jalopy Journal
