The Jalopy Journal
It does depend on the car, and haven't you heard? Unchopped is the new chopped. :D
A '50 Pontiac clip. :D
I design & build ASME coded pressure vessels for a living. I wouldn't suggest to let just anybody do it either.
If you have $$$ to spend on one, then by all means, follow what these guys are telling you. I happened to come across two "junk" compressors. One...
Blueline flappers that I picked up at Fastenal. For Nylon abrasives, I use either HF to get a big area quickly or Norton's for detail work. I'll...
This was intended to be used as a reason why the radiator supp't doesn't match the title. You have a title that is registered with an incorrect...
Only to the "period specific" folks. If it runs and drives, then who cares. It's not their car, so they'll have to learn to get over it. :D
Looks like the steps off of our old '83 Prowler.....travel trailer, that is. :D No clue man, but they're some pretty cool pieces.
The Corpus Christi chapter of the Kreatures has 'em every 1st and 3rd Saturday. Rotating schedule, owner for the week presents a work scope,...
Put down the keyboard and pick up a striping brush. That's the only way you're going to learn what designs work good for what's comfortable to...
What kind of master cylinder are you running?
I'm a lead mechanical designer working on an engineering degree(I'm on the 12 year plan, heheh). With 10 years of work experience under my belt, I...
Thanks! Anybody else??
I'm picking up a '40 Dodge front end from a buddy, and I'm looking for a parts vendor. Any ideas?? I'm looking for wheel cylinder kits, hardware...
I'm with T-man. I have friends who can KILL expensive tools by not using them properly. It's all in letting the tool do the work, not forcing it...
I have a Craftsman that I've had for two years. I used it almost daily, and for long runs. No problems what-so-ever. $50. Not the cheaper $25 one.
0.65 is bigger than 1/2". :) I'm assuming that you're talking about 0.065"wall thickness? I'm gonna have to brainstorm on this one for a bit....
It's a funny thing....I have been a designer for 10 years and it takes one engineer who knows it all to make 'em all look bad. I guess detailing...
Wasn't asking about the kerf on your machines. I was talking about this guy's CNC burny table. They don't all work the same, or take cut widths...
But can you check part/path continuity and export to a dxf with it? I'll do your part drawings for $10 each if you send me something fully...
Student versions require student verification in some form of a letter from a professor or something of the sort.
Yeah, $100 less than $1K. Full AutoCAD 2008 retails for $3,995 these days.
Send me your drawings, and I'll draw them up for you "on the cheap" and export the correct files. I have lots of CNC experience, and know how to...
Who did the rebuild on the carb?? Rochesters don't normally leak consistently like that unless it's installed improperly or the float is hanging...
Uh oh. Here it comes....
Maybe some Holley 847's?? I'm not too knowledgable in the 1bbl carbs. Somebody will chime in.
Shorten it. Proportions are way off. Put the tops of the doors back in, at least stitch weld the cab split over the rear window. The chassis on...
It's worth about what a boat anchor's worth. Go ahead and send it to me. I'll take it off your hands and dispose of it properly. :D
Alright, you're about to get tore up. First off, there's an "Introduce Yourself Here" section that you should have hit up. Secondly and most...
Three guys that I look to for some inspiration before I start a new piece... Caffeine Skratch Ron Gibbs
Separate names with a comma.